Devanco Canada - Get The Right Garage Door Opener‎ and Parts

R5209

Cast Iron Pulley 4"

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Cast iron pulley mounted on two pressed sealed bearings
300lb load rating

BK050/PR

Residential Bottom Bracket Low Headroom BB-5 LHR Sold as a Pair (L & R)

Minimum door thickness 13/16"
Gauge: .109 Height: 6-7/16"
A pair includes one left hand and one right hand bracket.

25-10402

Truck Door Pull Strap (15.5") with Zinc Retainer for Roll-Up Doors

Durable 2" wide black nylon construction for added strength and durability.
Custom lengths available
Cross Reference: 257000

BK312

Jamb bracket J-12 #12 12 gauge

Sold by the piece
Height 5.0" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot accepts 5/16" track bolts

23-10041

LiftMaster Limit Switch Commercial

Will work on LiftMaster and Micanan operators

25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

Unplated shaft 10 roller ball design
Shaft Length: 6.5" Overall Length: 7.5"
Long stem roller has a staked collar design versus machined collar on others.

25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #2996 T #70224

4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X10PO50

Devanco Loop 4' x 10' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

Stainless Steel Shaft no bearing design
Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
Rated for 200 000 cycles
Pound Load: 145 lbs

1104-8FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 8' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

02-409B

LiftMaster Key Switch with Best Cylinder

Two Position Key Control Station
Outdoor Surface Mt. (NEMA 4/12)
Tamperproof
Die cast metal enclosure with BEST cylinder (construction core included)
OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
Dimiensions: 3" x 3.2" x 4.2"

.......more details

60-7243

Standard Caution Sign English 12" x 24"

T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

Q521

LiftMaster Wiring Harness Kit CSW-DM K94-50287

Compatible with LiftMaster® Model CSW200UL Swing Gate Operators
Also known as: 94-50287 K94-50287

TB-20

Molded Rubber Bumper Black 3 1/2" L x 6" W 3 1/2" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Molded Truck Bumper molded in one piece and will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
3 1/2" L x 6" W 3 1/2" Projection

25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

Double - Loop
25" long 42" stretch 90 lb load
Sold individually
Same as part number 109
Rated for 10000 cycles

Spec Sheet

SOLID_SHAFT_17'

Solid Shaft 1" Keyed 17 ft Galvanized

Actual length is approx. 17'-1"

SL316COP

Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST316COP

3BXL

Control Station Exterior Surface Mount O/C/S N4 with Key Lockout

Metal Enclosure
Buttons aligned in a triangular pattern
H=4-3/8" W=4-1/8" D=2-5/8"

3BXL

776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

1/4" bolt has 7/16" head
Max torque = 6
Full thread
Grade 5

OGH-6235-ECB

Manaras 1-1/2 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

BK200

Flat End Plate with Bearing 5-5/8" 4-Hole Sold per Piece

8-gauge

4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

ALUM-562

Aluminum 24" x 100' Spool Commercial Brown # 562

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 562
Reverse side is #431 Bright White

Colour chart

12-000I-KEY

Spare Key for American Access Keypad

Spare key only for model 12-000I

BG770-50-11

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 115V 1 Ph *Discontinued Replaced by MATDCBB3*

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
2-btn control station Open/Close
Fully adjustable limit system
Pad mount
Security+ 2.0 technology

.......more details

E402-00-FM

Doorlec Ersce Utility Switch 6A/230V Roller Arm ** Indef. Delivery

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller
Made in Italy

SLT17-20P

Rolling Steel 2" Flat Slat 20-ga Primed

SL332COP

Copper Sleeve 3/32" 100 Sleeves per Pkg ** Price on request

Oval sleeves ONLY
Stops sold separately part # ST332COP

SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

22 gauge
Max size: 18'4" max std. width 20'4" max std. height
Slate type: Curved
Finishes: Gray White Tan Brown or Galvanized
RAL Powder coat option in 188 colors

4004-10FT

Aluminum Retainer only for Heavy Brush 10' Long 45 degree ** To extent of inventory

For angle application (45 degree)
For use with Heavy Brush

WD-309884

Wayne Dalton 3-Btn Transmitter 303 MHz 3910

Visor Style (comes with visor clip)
Green Indicator Light
Size: 2-1/4"" x 3-1/2"
Works with Wayne-Dalton Models: Classic Drive: 3012 3016 3512; Quantum: 3211 3212 3213 3313 3412 3413
Same as models: 3910 02-3047-3BUH 297132

Programming Instructions

OSH-6233-ECB-LH

Manaras Opera-SH 3/4 HP 208V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

03-35711

LiftMaster Contactor Relay 24V

Contactor Relay Replacement Kit (24V 2NO+2NC)

39142R

Genie Aladdin Connect

Aladdin Connect™ controls and monitors your garage door opener with your smartphone
Compatible with smartphone iPad(R) & tablet devices
Easy installation & setup
Operates up to 3 doors with 1 system
Able to program timed closed functions
Wi-Fi communication Retro-fit capable Works with all brands

.......more details

Quick set-up guide Guide d'installation rapide

HINGE-611-PCG

Powdercoated Hinge #6 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #6 - 0.81 lbs
Powdercoated Grey
For use with 7/16" stem rollers

38874R3.S

Genie Electronic Circuit Board Assembly

Replaces board 38001R3.S and 37470R3.S
Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030

.187-2-R

Cut-to-Length Torsion Spring .187 x 2" Right Hand Wound

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

1001-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual-fin vinyl

CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

Same as Garaga CF101

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

971LMC

LiftMaster 1-btn Security+ Transmitter 390MHz

390 MHz Security+ single button visor remote
Compatible with Security+ systems with Amber learn button including Chamberlain Sears Craftsman and Raynor code rolling residential openers (Safety Signal) manufactured 1997-2005
Visor clip and Lithium battery included (part #CR2032)
Same as 971LM 91LM 950CB 950CD

Programming Instructions

.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

4008-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree 5/8" Offset

2" Offset
For use with Light Brush or Vinyl Insert

ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.

PRO-LT-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

7FT-RAIL-CHAIN

LiftMaster 7' chain drive rail 1707LMC - colour code: Green

#48 chain size
Price reflects cost if purchased with an opener

TB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

PRO-SD-10011-U-RH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

41ACOM12001

LiftMaster Capacitor 32UF 230V **DISCONTINUED

MP-00072

Micanan Jackshaft with Auxiliary Trolley Assembly 14' High Door #41 Drive Chain

Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
Operator must be supplied with reversed limits
For models: PRO-J H HHD GH GHC

TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

OTBH-6232-AE06

Manaras Trolley Operator 1/2 HP 208V 3Ph with NM Elect. Circuit Board Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain

7001-18-CREAM

Commercial Side & Top Weather-Strip 18' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (10)

19-41119M

LiftMaster Roller Chain #41 with Master Links 59-1/2" Long

Same as: 195105 19-41119MB 19-4119M 1941119M

CP-EB-MCJ-34115

Lynx E-Box for MCJH 3/4HP 115V 1Ph

Complete electrical box

Q092

LiftMaster Rubber Isolator Kit 2 Required Per Operator K75-50150

Elite rubber isolator for the HCT (Hercules).

AELD

LiftMaster Elite Plug-In Loop Detector

For use with Omni Control board available on the Chamberlain commercial line.

Installation Manual

NEW-HAMP-XL

Garex Ready to Install Country Style Special Order

Insulated garage door designed to be energy efficient with R-16 thermal resistance value
With 11 vertical lines featured in the embossing adding a more contemporary touch
Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)

733

Fasteners Flat Washer 5/16" Zinc 1000/Box

K081C0168

LiftMaster Screw Drive Rack

Also known as: 081C0168 81C168
This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240

.295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

WEL-200-R

EMX Wireless Edge Link Receiver Unit only

Manual

639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

Open/Close/Stop remote for 9 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

CG-HOIST-SINGLE-1

ControlGard Chain Hoist Single Compound 1" Bore

Cornell Single Compound hoists are designed for smaller doors
Features an integral braking system that only moves when the user is actively pulling the chain

CG-HOIST-DOUBLE-1

ControlGard Chain Hoist Double Compound 1" Bore

Cornell Double Compound hoists are designed for larger doors
Features an integral braking system that only moves when the user is actively pulling the chain

DHJ751L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Right Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

7176.218*28.85

Whiting Heavy Duty Torsion Assembly .218 x 2" shaft 85"

24040

Doorlec Roller Chain #40 Sold per Ft

41011

Doorlec Brake Release Cable

Used on GH

112631.0001.S

Overhead/Genie Logic Board

210264

Skylink Case Cover Atoms

BGARM14

LiftMaster 14' Arm only for Techna Barrier Gate

For use on Techna gate operator

EP2983-BLACK

Exhaust Port 4" non latching long barrel Black Nylon

Inside diameter: 4"
Outide diameter: 4-3/8"
Sleeve: 2" (non latching)
Flange: 6"
Includes fasteners
Black Nylon

.......more details

510.3920.07

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 7 Panels

Upgrade option

38000063

Tork Winch Electric Motor 1HP 115V 1Ph

Replacement electric motor for TW 1200

2807.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 343" Long
For Roadside order part # 2806.177.340

2806.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 34" Long
Roadside
For Curbside order part # 2807.177*340

93519.5260

Todco Side Seal 80" long Lip ** Special Order Quote Only

Special Order item. Must be quoted each time
Fits Fleetstar Door

5001-16-CREAM

Residential Side & Top Weather-Strip 16' Long - Cream

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

2200-215

Linear Precision Bearing 5/8"

BEA-10LIGHT-A

BEA Modular LED Signal Light Audible Segment

Audible Alarm 2.6 KHz ±250 Hz oscillation frequency; maximum intensity 92 dB @ 39.6 in

MOTOR318

Manaras Electric Motor 1 HP 120/240V 1Ph

Continuous duty C-flange TEFC 60Hz

5-30-9

3" Vertical Track 12-GA 15'-3" (16' door) Sold per Pair

Pierced track

MGH-6215-M-N1-RH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

112357.0002

Overhead Logic Board for RSX 1/2HP 1PH

Fits OPRSXH75015BR

112357.0004

Overhead Logic Board for RSX 575V 3PH

Fits OPRSXH75015BR

K41-0095-000

LiftMaster DC Motor Drive HD Gate

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

K41-0082-000

LiftMaster HD Motor Replacement Kit

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

SUPPORT008

Manaras Board Support 1" ** Special Order Only

DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

Sold in increments of 5ft to a max of 25ft

201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

801-300-002-01-REFURB

Refurbished 801-300-002-01 Unit

51-013611

Blue Giant Sensor Wand Flat 21 inch **Special Order

Price by Quote Only

PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
3-button keychain remote with proximity sensor
2x the range of standard remote controls
Narrow-band transmission

C12

Felco C9 Cable Cutter 3/8" Capacity

The FELCO C12 a two-hand wire and cable cutter designed for precision.
Made with unbreakable forged aluminum handles and high-quality hardened steel blades
The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
Length: 19.69 in
Weight: 3.75 lb
Cutting diameter: 0.47 in

.......more details