Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Open
MET-14500C

Cable Tie Metal Tooth 14" 50 LB Black 100/Bag

5735.96

Whiting Bottom Seal Grey 96"

  • For Dry Freight and Truss Doors
4X20PO50

Devanco Loop 4' x 20' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation instructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
1003-4-DF-CUT

Bottom U-Rubber 4" Dual Fin Black Sold per Foot

  • Sold in cut lengths per foot.
  • Dual fin
C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

  • Stamped bearing for lighter loads
  • For a heavier duty machined bearing use R5114
ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
41A7920-1

LiftMaster Hardware Kit

MUSHROOM-PB

Lockable Mushroom Push Button with 1 NC Contact

  • N/C Contact "Stop"
  • Push to Stop Turn to Unlock
  • NEMA 4 Enclosure
UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
  • 5-1/8" hole center to hole center distance
  • 3500 lbs load rating
ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
RA-AD-WKP-10

Lynx 10-btn Wireless Keypad AD455 372 MHz

Compatibility chart
CP-LX720

Lynx 3-btn O/C/S Transmitter 372 MHz for Commercial Op. with UL325 Board

  • UL325
  • Works on the new Lynx commercial operators
  • Open Close Stop transmitter
  • Not compatible with the 372MHz residential operators.
Programming instructionsCompatibility chart
DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

  • Standard features include: 2-cable balancer with independent springs
  • Balancer springs treated with rust preventative
  • All door hardware is E-coated
  • Spring loaded lock catch
  • Heavy-duty 2" 13-gauge track
  • Stainless steel aircraft cables
    • .......more details
EX220-1K

Heddolf 1-btn Long Range Transmitter 433 MHz with antenna

  • 1 button gate and garage door opener transmitter
  • Up to 1500 ft range
  • 10 dip switch format
  • Includes antenna
  • Same as ER220-K
Programming Instructions
SPF514-6

Spring Filler 12 ft Long No Fins

  • For use with 5-1/4" or 6" torsion springs
  • Accomodates both 1" and 1-1/4" shaft size
BG790-50-11-HTC

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 115V w/Arm Weight & Heater and TTC

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • 02-102 Open/Close Push Button Included
Installation ManualSell Sheet
MA028

LiftMaster Padded Barrier Arm Yellow 14ft

  • For use on Mega-Arm gate operator
  • Requires adapter collars model MA031 - sold separately
Additional arm accessories
MD-00003

Sprocket 41B36 x 1" Bore 1/4" Keyway

  • 2 set screw 5/16
5001-10-CHARCOA

Residential Side & Top Weather-Strip 10' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
25-2010

LiftMaster 10 Amp Overload Fuse

  • For models: SL585-50-11 SL595-50-11 SL575-50-11
SGP-353-2-575/3

Doorlec Gate Master 2 HP 575V/3P with TEFC Motor

  • Post mount heavy-duty industrial slide gate operator
  • Max. gate weight: 2500 lbs
  • Gate travelling speed: 45 ft / minute
  • 175 watt heater included
84284

Marantec Logic Board for Non-EOS Models

  • For use on M Line- M-4500 and M-4700 models.
  • For use on Q Line - 7500 and 7700 models.
  • For use on Martin DC 3500E and DC 3700E models.
  • Replaces 8054216. Special programming needed. Instructions included
MAW123-BLK-U

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

  • Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
  • Purple
GH4416-06-L

Green Hinge #6 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
K-LA400

LiftMaster Primary Replacement Arm Service Kit for LA400 Original Silver Arm

  • Replacement arm only - no stripes old style
K23-19380

LiftMaster Reset Switch for LA400

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

  • Transmitter offering means of activation of automatic doors with extended hold feature.
  • Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
  • Operating temperature: -10 to 55C
  • Controls one 10RD433 receiver.
1104-8FT-CLAYST

Residential Side & Top PVC Weather-Strip with cap 8' Long - Claystone

  • Claystone rigid vinyl retainer with claystone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
100MAPS

LiftMaster External Power Supply 110VAC Input 12VDC 2000mA

  • Provides enough power to operate two LC-36A light curtains.
  • Includes 38' cable leads
8030234

Marantec Chain Connector Kit

  • Works for all Marantec Chain Drive Openers
  • For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
  • Includes two connector pieces and four screws
  • Not for use on the heavy duty rails used by Q7900 & M4900e
PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

  • Emitter only. If receiver is required order PD180CBT30Q
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage emitter: 2 x 3.6VDC lithium batteries
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

  • The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.
    • .......more details
Installation ManualSell Sheet
PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

2JW-D064

Rolling Steel 2" Curved Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
SLT-TT

Rolling Steel Thermotite Slat Foam Injected

PL-B11-ARM-STR

Lynx Straight Arm for Proline Operator

  • Used on Proline residential garage door openers
ST316COP

Copper Stop 3/16" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL316COP
ST532COP

Copper Stop 5/32" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL532COP
.363-3-3/4-LH-C

Torsion Spring .363 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 3-3/4" Length: 12 ft
.225-2-5/8-RH-C

Torsion Spring .225 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2-5/8" Length: 12 ft
CS202S-5-100

EMX Car Sense Vehicle Motion Detector ** Discontinued Offer VMD202 instead

  • Low voltage used for automatically opening gate when exiting property without requiring the use of a remote control transmitter key pad or any other operator control device.
  • Can be located up to 150' from the gate. Senses automobiles on a driveway up to 12' wide moving more than 5 m.p.h.
  • A second probe can be connected in parallel for additional coverage or for automatic opening in or out.
  • Available in a five wire (recommended for use with GTO operators) and a three wire version.
  • The CarSense 202 is buried in the ground so it will not be noticed by a potential intruder or vandals.
  • The CarSense 202 accepts a wide range of power input of 9 - 41 VDC and 6-29 VAC. The low current consumption of 250uA and 12mA detected make the CarSense 202 Slim a great choice for solar applications
    • .......more details
Installation ManualSell Sheet
IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair *** To Extent of Inventory

  • Brackets are predrilled
  • Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
  • Made of metal
  • Sold as a pair
  • 9" x 3" L-Shaped
179193

Work Light LED Bar Black 1600 Lumens

  • LED Power: 20W
  • Beam: Spot
  • Size: 26" x 12" x 12"
16-5L300

LiftMaster Cogged Vbelt 5L 30"

CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

K76-36398

LiftMaster Electric Motor 1/2HP 24VDC for CSL24V / CSW24V

  • Replacement motor with improved brush assembly for CSL24V and CSW24V gate operators
VBELT_5L345

Doorlec VBelt 5L 34.5" *** Replaced by VBELT_5L350

  • Same as part number #19052
R5997

Shaft Collar 7/16" ID x 7/8" OD x 7/16" W Zinc

  • Axial Load: 950 LBS
  • Screw length: 1/4"
  • Screw type: Socket set screw
  • Solid steel collar with set screw
18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

  • Gearbox for GH operator
109099

LiftMaster Flat Wall Plate Mounting Bracket

  • Heavy 1/4" steel plate bracket used for wall mounting of side-mount operators.
  • Slots in back allow for tensioning of drive chain.
  • Mouting studs match up with mounting holes of LiftMaster Models DJ DH J MGJ H and GH operators.
VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
Installation ManualSell Sheet
754

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" (#4PT) 1000/Box ** NLA Offer 108207

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
MK-00648

Micanan 1-Channel 24V Receiver with Antenna

  • Comes with antenna MK00719
  • Total of 20 regular remotes can be programmed or 200 of the block coded remotes MK-00660
Programming Instructions
RBH753L5-LH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 75
S2TR2641E2M

Erone 2-Channel Master Transmitter 433MHz

  • One master transmitter is required for each multi-user receiver for doing the programming.
  • Range in open space: 850ft or 250 m
  • One 12V lithium battery included
  • Bronze body with yellow buttons.
Sell SheetBrochureWireless System Chart
753

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#3PT) 1000/Box

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)
19-48047M

LiftMaster Roller Chain #48x47

  • #48 x 47 pitch with master link
  • Internal reduction chain
  • Length is 24"
7FT-BELT-LINEAR

Linear 7ft Belt Drive Rail for residential openers (HBT7C)

  • 7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

  • Same as part # 65893 and 97244
  • Visor mount
  • Includes battery CR2032
  • Made in Germany
Instructions
MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

  • For 2-wire edges
  • Was previously MWRTA02A now has a new board making installation easier
  • Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
  • This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
  • The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.
29-NP712

Lead Acid Battery 12V 7A

655202

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
10FT-RAIL-CHAIN

LiftMaster 10' chain drive rail 1710LMC - colour code: Red

  • #48 chain size
  • Price reflects cost if purchased with an opener
41A5021-9G-315

LiftMaster Circuit Board Assembly

  • Board: Security+ 315 MHz
  • Aeesmbly includes: circuit board and end panel
  • Also includes 1 Multi-Function wall ctrl panel - 2 wire
  • For ATS2113X model
  • For older ATS operators use replacement board 41A5021-1ATS
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
ME113-E

Miller Edge Black End Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
.207_1-3/4"-LH

Torsion Spring .207 x 1-3/4" x 12ft LH Brown

  • Wire size: .207
  • Inside diameter: 1-3/4"
  • Length: 12 ft
LSGRY

Loop Sealant Cartridge Grey 29oz

  • Also available in black (LSBLK)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual
.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

  • Visor clip and 3V lithium button cell (CR2032) battery included.
  • Same as Chamberlain model 953D
373LMC Manual
MK00488

Micanan Electronic Circuit Board Monitored

  • Replacement board for PRO-LH (50-11)
  • Board has terminals P1 & P2
  • Up to 20 transmitters can be programmed
Instructions Manual
VBELT_4L310

Lynx VBelt 4L 31" (4L310)

  • Fits the old Lynx 455 garage door opener
SEA433

Erone Tuned Antenna 433MHz

  • Increase reception and/or range
  • 11.5ft (3.5m) coaxial cable (RG 58) included
  • L-Shaped bracket for wall-mounting
Wireless System Chart
RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

  • Open/Close/Stop remote for 32 doors.
  • By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
  • Comes with LED battery life indicator and 9V battery.
  • Can be wall or post mounted.
  • Must be used with 32 MCR series receivers.
Programming Instructions
2234.296

Whiting Coldsaver Bottom Panel 12-1/2" x Max 96" with lock seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick max 96" wide
  • Includes Lock and keeper
308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

  • Open/Close mini remote for 1 door
  • Compatible with Allstar and MVP receivers
  • Tab for key ring
  • Power: 12-volt battery
  • Codes: 19683 (set by nine trinary dipswitches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

  • Three channels - three relay outputs
  • Oil-tight JIC ABS case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
    • .......more details
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

  • Three channels - three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
218189-01

Linear Trolley Assembly

15.1

Whiting Truck Door Stainless Steel Center Hinge

RV-300

3" Vinyl Insert for Brush Retainer per foot

  • Color: Black
4006-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1007-1-5/8-24'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 24'4"

  • For door thickness of 1-5/8" to 1-3/4"
  • die # A-25388
1006-1-3/4-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1001-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

  • Aluminum retainer with black dual-fin vinyl
25-42-120

Extension Spring 7' Door - 120 lbs Green

  • Double - Loop
  • 25" long 42" stretch 120 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-80

Extension Spring 7' Door - 80 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 80 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2547
27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

  • Cast aluminum construction
  • Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines left or right drum.
  • Holds up to 130" door cable
  • Cross Reference: T #59033-2 T #59129-2 W #4014 330000
DM4X8

Cable Drum Standard Lift 8' 400-8 Pair

  • 8' Standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH Color coded: Red=LH and Black=RH
  • Max. Door Height: 8'-1".
  • Rated Lift per Drum: 265 lbs
  • Max. Cable Diameter: 1/8"
  • Mounting: 1" tube or solid shaft with 1/4" keyway
    • .......more details