Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

50680

Doorlec Clutch Assembly for LJH

IRB-EXP

EMX Industries Explosion Proof Through-Beam Photocells 1162-1

Designed to operate in areas with explosive environments.
NEMA 4 and 7 housing
NEC Class I Groups B C & D Class II Groups E F & G CSA certified CENELEC certified EExd IIC.
Copper free Aluminum with Epoxy finish.
Potentiometer range adjustment to allow more precise tuning to site.
Through beam design is not affected by shiny surfaces.

.......more details

Installation Manual Sell Sheet

37407

Doorlec Reversing Contactor BF9 24VAC

87-P-075

LiftMaster Turac 3/4" Push on Fastener

BRACKET112

Manaras Wall Mount Stud Bracket

This Wall Mount Bracket can be used with all Manaras Wall Mount commercial operators except the MRGH and MGH models
Will not work will Trolley Operators

LA500DC

LiftMaster Primary 24VDC Actuator Arm for Single Gate Applications New Model

Replacement actuator arm for single gate applications

Installation Manual Manuel d'installation Sell Sheet Brochure

764

Fasteners Serrated Flange Nut 5/16-18 1000/Box

RBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

� The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.

Programming Instructions

H501L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Left Hand *** No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

348.000

Whiting Tongue & Groove Bottom Panel Assembly with #77 Lock Made to Order. **Quote Only

15-1/2" x 96" standard size panel.
Extra wide panels will carry an additional charge
Primer only

CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
Polarized photo-eye design for a safe retro-reflective photo-eye system
Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
Range up to 30 ft - indoor use only
24VAC operation
Color: Yellow

.......more details

Installation Manual

SG10-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Yellow Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

08-11012

LiftMaster Bevel Gear 5/8" ID

Fits LiftMaster GH operator

655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

Pro-H requires 3 of these bearings

EXTANT

LiftMaster Coax Antenna Connection Kit JF

For use on Medium-Duty commercial operators only

Installation manual Manuel d'installation

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

50-104-1

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO

02-403P

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Green Black Red Part # XALD03H7

Open/Close/Stop allows complete control of the door.
Compatible with all commercial door operators.
NEMA 4 4X 12 13
Outdoor surface mount station with polycarbonate enclosure part # XALD03H7

Sell sheet

CPS-RPEN4

LiftMaster Monitored Retro-Reflective Photo Eye with Nema 4 Enclosure for Commercial Door Applications

Installation Manual Manuel d'Installation Sell Sheet

ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

2" Wide 1-1/4" High

50-106

Take-Up Reel 2-Wire Metal 18-ga 20ft

18-gauge
20 ft extended
Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
Also called Reel cord

K001A5566

LiftMaster GL Replacement Board ***Discontinued. No Replacement. *** No Longer Available

Replacement Logic Board for LiftMaster Gate Operators
Fits Slide operator SL570 SL575 SL580 SL585 SL590 SL595
Fits Swing operators SW420 SW470 SW490

CR2450

Maxcell/Renata 3V Lithium Button Cell

880LM

LiftMaster Smart Control Panel Sec+ 2.0 ***Discontinued replaced by 880LMW***

Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
Equipped with the Maintenance Alert System
On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
Displays Fahrenheit or Celsuis
Motion detector automatically turns on garage door lights when movement is sensed

.......more details

Installation Manual Manuel d'Installation

71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual

21-14182

LiftMaster Transformer 120-240V 24VAC 20VA

120/240V Primary 24V Secondary 20VA 50/60 Hz
Same as K21-14182 used on L5 commercial operators

41A6102

LiftMaster Power Door Lock Connector with 2 pins

For Jackshaft models

373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

Visor clip and 3V lithium button cell (CR2032) battery included.
Same as Chamberlain model 953D

373LMC Manual

12561

Doorlec Brake Drum 4" Diameter ** To extant of inventory

Fits all Doorlec operators equipped with brake shoes

PRO-LH-5011U-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

LIMIT015

Manaras Single Limit Switch without Lever

No action limit switch - Cherry
Used on Manaras operators built from 2002 to Feb. 2009
Also used as disconnect switch on Opera models

Limit Switch Chart

8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz *** To Extent of Inventory

Open/Close remote for 3 doors
Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 6561 (set by trinary dip switches)
RF frequency: 318 MHz

.......more details

Programming Instructions

733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

200BL

2" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1703

DR

Linear 1-Ch DR3A Delta3 Receiver 310 MHz (DNR00001)

310 MHz frequency 8 dip switches for coding 256 possible codes
24V AC/DC input power 3 terminal connection
Activates one device
Dimensions: 5.5" W x 4" H x 1.25" D
Same as: DNR00001

Installation Manual

1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-1/2"

DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
8-dip switch 64 selectable codes
Same as: DNT00027B or DT4A
310 MHz frequency

Programming Instructions

1003-1-5/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

32-48-220

Extension Spring 8' Door - 220 lbs Green ** Replaced by 27-48-220

Double - Loop
32" long 48" stretch 220 lb load
Springs sold individually

Spec Sheet

27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-2 T #59129-2 W #4014 330000

26-40001

Truck Door Bottom Seal Standard 98" Long for Todco Roll-Up Doors

Extruded from long lasting rubber
Prevents dirt and moisture from entering cargo bay.
Cross Reference: T #80840 W #3257 610200

Z9005

Shaft Key Straight 3" X 1/4"

3" Straight Key
Zinc Plated Steel

CBA18A07

Cable Assembly 1/8" 7x7 102" Sold per Pair

Galvanized cable assembly for a 7ft door. (102" = 8'6")
Sold as a pair

R5209

Cast Iron Pulley 4" **** Indef Delivery

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Cast iron pulley mounted on two pressed sealed bearings
300lb load rating

846CABLECL

Cable Clip - 14GA

Cable Adjustment Clip
3 hole pattern
Used to attach a cable to the S-hook on an extension spring system
Same as part number 423

MK00643

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Field Install

Auxiliary device logic board
Controls red/green lights
Provides Normally Open dry contacts for fully open or close positions
Normally Open dry conatcs for door opening or door closing cycle
Works on circuit boards: MK00641 MK00642 MK00701
Includes installation hardware

.......more details

Instructions Manual

02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

Two-position keyswitch. Key removable in either position.
Surface Mount
May be used on all operators
Die-cast metal enclosure non-tamperproof

23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

Double limit switch DP DT
For LiftMaster and Micanan operators

LC-36A

LiftMaster Light Curtain **Discontinued

Must be used with a primary entrapment device and be installed along the vertical plane of the door.
Color-coded transmitter and receiver for easy identification.
Provides 36 in. of effective height coverage to increase the area of protection.
Multiple sets of LC-36A curtains can be mounted on a door providing coverage flexibility.
Maximum door width of 33 ft. ensures coverage for most commercial doors.
Eight (8) LEDs per side and 22 cross-beams produce an invisible curtain of infrared light for maximum detection capability.

.......more details

Installation Manual Manuel d'Installation Sell Sheet Connecting the lc-36A to a Non-LiftMaster Opener

SPR41B18X1

Sprocket 41B18 1" Shaft 1/4" keyway

Same as MD-00145

K74-30754

LiftMaster Battery Harness 1 unit only

For LA400
2 harnesses required per operator- 1 for each battery

02-406-1

LiftMaster Key Set Qty 2 Pre 2006 #8

Replacement Key ONLY for 02-406 Pre- 2006 #8

REEL-20

Devanco Take-Up Reel 2-Wire Metal 18-ga 20ft Black

18-gauge
20 ft extended
Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
Also called Reel cord
Comes with reset button for CSA conformity

K12-8032

LiftMaster Flange Bearing 4-Bolt 1-1/2"

Also known as: 128032 12-8032 G128032
For use with LiftMaster® Models BG770 and BG790 Barrier Gate Operators.

MK-00653

Micanan 3-btn O/C/S Transmitter 372 MHz

Hand held transmitter for on-board receiver with smart 10.0 board only

Programming Instructions

VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

Used on MTH/MTBH APE APT models
Same as Doorlec 19030

PRO-PL-10053-E

Micanan Wall Mount Control Panel 1HP 575V Non-Monitored ECB

Standard features include: N-4/12 12" x 10" x 6" panel B-2 C-2 D1 E2 T TS Mid-stop control functions Time delay on reverse On-board radio receiver hinged cover backplate primary fuses in panel
If PBS on cover required an additional charge will apply
If panel not ordered with an operator an additional charge will apply

Z9900

Leaf Bumper Spring with bracket Sold as a Pair

Leaf spring with bracket and safety strap.

LB410-14SF/P1

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

788-037-2MX

Blue Giant Hold Down Assembly Rewind Style Compete

Holdown Aircraft Cable Rewind Style Blue Giant-Complete

BGARM14LED

LiftMaster TECHNA Barrier Gate Arm only 14ft with LED

Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle.
Compatible with the S50L a wireless edge safety device.
IP68 rated waterproof LED lights
Operating temperature: -25C - +60 C

.......more details

Installation Manual Manual d'installation

1634-112-W

Elton Commercial Window for Flush Doors 1-1/2" thick 16x34 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 35-1/8" x 17-1/8"
Cut-out size: 33-7/8" x 15-7/8"
Vision area: 31-3/4" x 13-11/16"
Different glass options and frame colours are available upon request

.......more details

CBG24DCGMC

LiftMaster Techna Commercial DC Barrier Gate Operator White Cabinet

24VDC barrier gate operator with battery backup
Continuous-duty motor with soft start/stop
Exceptional starting torque and continuous operation
Heavy-duty motor supports 6000 cycles per day
Operator speed of 2.5 seconds to open or close
Aluminum alloy chassis

.......more details

Installation Manual SellSheet Data Sheet Wiring Diagram Quick Start Guide

10SSTI

BEA Active Infrared Presence Sensor

Active infrared sensor for industrial environments.
Applications: automatic industrial doors gates and automation.
Uses triangulation to detect presence of an object eliminating false detections caused by varying ground conditions.
Can be mounted on stationary or moving objects.
Can be used individually or daisy-chained with up to 8 other modules.
Can be used on narrow and wide doors.

.......more details

K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC) for Maxum Operators

For Maxum op

71-B1PH-1

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for SL585U/SL595U

This is a replacement Internal Brake Solenoid (120/240V SL585U/SL595U). Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators.

K002-KEY

Replacement Key for 3BXLT Key #2

Replacement key only for key #K002

OTBH-6113-AM05

Manaras Trolley Operator 3/4 HP 120V Monitored Board w/Eyes Apt. Model

The OTBH model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

6200-2-7-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

2" diameter white nylon tire
6200 sealed precision bearing
Zinc plated 7.04" Overall Length 5.96" stem
Rating: 100lb; 100000 cycles of a 12′ door

AUXREL

LiftMaster Auxiliary Relay Board MAXUM

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

Configuration

GALV-250-2-144-R

Torsion Spring .250 x 2" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

2200-540

Linear Replacement Key for BG Snap Lock

OMT-6112-MON-N1

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Monitored N1 Eyes

Designed for use on smaller and low-cycling industrial standard lift sectional doors.
It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
Equipped with the new Electronic Control Board (BOARD 070) with N1 photoeyes
Maximum Door Height: 14' (4260 mm)
Back Room: door height + 3'11" (1175 mm)
Head Room For Tracks: 5" (127 mm) above the highest point of door travel

.......more details

E/BLOP/130

Automatic Systems Kit for Breakaway Arm BL229 Option ** Price by Quote Only

This is an option for the BL229 arm

9-14-1

ARB Bracket 18-24" Adjustable Zinc Plated Half Hinge

Also known as Operator Reinforced Bracket

OHJ-6113-M-N1-RH

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

Specification Sheet

NIR-KIT

Emx Industries Retro Reflective Photoeye Sensor with Reflector and Hood (5200-K)

Watertight packaging
Detection range: 30 feet
6 foot cord
Reflector Hood Bracket and mounting hardware Included
2 LED indicators
Sensitivity adjustment

.......more details

LM21AFCB

LiftMaster Advance Fire Control Release Device

UL 864 Revision 9 compliant.
3 count obstruction cycling.
Selectable 10 20 30 or 60-second time delay on alarm.
Test key switch – Floor level testing.
Motor voltage sensing.
Form C relay output.

.......more details

2807.177*270

Whiting Spring Assby .177 x 2-3/16 x 27" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 27" Long
For Roadside order part # 2806.177.270

050ACTBMC

LiftMaster Receiver Logic Board AC WiFi

050ACTBMC is a replacement Bluetooth® Enabled Receiver Logic Board Kit
For use with various LiftMaster® and Chamberlain® Wi-Fi® AC Belt Drive and Chain Drive Garage Door Openers manufactured 2011 to 2022 only.
The unit will feature a yellow learn button
Also known as: 1D8088-1 050ACTWFMC 050ACTWF 1D8808-3 041D80881D8088-1 50ACTWF 050ACTBMC 50ACBL1 50ACBL2 50ACBL3 50ACBL4 50ACBL5 50ACCL1 50ACCL2 50ACCL3 50ACCL4 50ACCL5 50ACBR1 50ACBR2 50ACBR3 50ACBR4 50ACBR5 50ACCR1 50ACCR2 50ACCR3 50ACCR4 50ACCR5

P-9931R-4F

Pulsar MVP 1-Channel 4-Wire Gate Receiver 318 MHz P-111645

One channel
4-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming instructions

P-733T

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

Allstar compatible
Wall mount
OPEN-CLOSE-STOP 3 doors
8 dipswitches 318 MHz

Programming instructions

NIR-50-325-KIT

EMX Retro Reflective Photoeye Kit UL325 NC/10K Across NO Contact EMX-5255-K

Kit includes photoeye with hood reflector with hood and mounting bracket
Retroreflective configuration
NC and 10K monitoring
50 ft. operating range
Sensitivity adjustment
Wide range operating voltage

.......more details

Installation Manual Specification Sheet

K001D8116-1

LiftMaster Power Board 3ph 230/460/575V L5 N4/4X

Complete kit includes: 3PH power board and standoffs required for installation

03-35711

LiftMaster Contactor Relay 24V

Contactor Relay Replacement Kit (24V 2NO+2NC)

CP-LX900

Lynx Control Board with Cover for MDJ models

works only on MDJ (medium -Duty Jackshaft) models
UL325 compliant with B2 C2 modes
includes on-board Timer-To-Close
On-Board 372MHz radio receiver accepts 20 remotes

MDJ Installation manual

CHI-FS-7522

CHI Fire Shutter 7522 ** pricing by quote only

Door meets 45-minute 90-minute and 3-hour UL ratings with full compliance to NFPA-80 standards.
Standard curtain provides a 1 ½” pre-painted hot dipped galvanized steel slats.
Smooth quiet drop testing thanks to a durable viscous governor.
Simple drop-testing and ability to reset the door which makes for quick operational readiness.
Standard bottom bar slide bolt locks with an optional cylinder lock.
Slat Thickness: 22 gauge Flat slats

.......more details

EHJ-321-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 230V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details