Devanco Canada - Get The Right Garage Door Opener‎ and Parts

831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

Three channels - three relay outputs
Oil-tight JIC ABS case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683
Learning technology
RF frequency: 318 MHz
Dimensions: 7.125" W x 8.625" H x 4.625" D Order number: 190-107478

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

Open/Close remote for 9 doors
Compatible Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door trio to operate
Power: 9-volt battery

.......more details

Programming Instructions

639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

Open/Close/Stop remote for 9 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

HAE00049

Linear Drive Sprocket Holder and Belt Clamp

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

HAE00004

Linear Limit Switch Assembly

For LSO LDO LCO

232168

Capacitor 3/4 HP 220V 65 MFD

For LCO75 only

218014-02

Lamp Socket Assembly

For models LSO LCO LDO

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4008-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree 5/8" Offset

2" Offset
For use with Light Brush or Vinyl Insert

4007-16FT

Aluminum Retainer only for Light Brush***Actual Length 16'2" 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

4" yellow vinyl insert 200ft spool.

1016

Storm Shield Sold per Foot with 1 caulk tube of adhesive per 20ft

Installed underneath garage door to prevent water from flowing into garage.
Can be driven over with vehicle
Color: Black
Width: 3-3/16" Thickness: 0.5" (highest point)
Comes with 6 x 10.3oz caulk tubes per 100'

Installation Instructions

1015-1-3/4-24'

Rigid Vinyl Bottom Retainer Raised Centre 24' Long

Black - for door thickness of 1-3/4"

1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/4-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1006-1-1/2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4" • DIE # ES18191

371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz

Visor clip and 3V lithium button cell (CR2032) battery included.

371LMC Manual

1003-1-3/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

1003-1-3/8-12'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

PRO-CUT

Pro-Cut Angle Cutter

Performs accurately up tp 2x2 angle.
Capacity is 12 gauge steel.
Weight is 18.5 lbs.

BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

For the temporary repair of a broken spring.
Wire size: .2187 - .3065

24-HWB-PAIR

Winding Bars Hex 24" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 1/2" at one end with a 5/8" outside dia. on the other end
Sold as a pair.

18-RWB-PAIR

Winding Bars Round 18" Set of 2

Cold rolled hardened steel.
Machined to 7/16" at one end with 1/2" outside dia. on the other.
Sold as a pair.

1104-18FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 18' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.
Sold by full case quantity (12)

1106-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual fin vinyl

32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

Double - Loop
32" long 48" stretch 80 lb load
Springs sold individually

32-48-60

Extension Spring 8' Door - 60 lbs Brown ** check for availability

Double - Loop
32" long 48" stretch 60 lb load
Springs sold individually

32-48-70

Extension Spring 8' Door - 70 lbs Orange ** check for availability

Double - Loop
32" long 48" stretch 70 lb load
Springs sold individually

25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

Double - Loop
25" long 42" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-180

Extension Spring 7' Door - 180 lbs Gold

Double - Loop
25" long 42" stretch 180 lb load
Sold individually
Rated for 10000 cycles
Same as part number 118

Spec Sheet

25-42-160

Extension Spring 7' Door - 160 lbs Brown

Double - Loop
25" long 42" stretch 160 lb load
Sold individually
Rated for 10000 cycles
Same as part number 116

Spec Sheet

25-42-130

Extension Spring 7' Door - 130 lbs Yellow

Double - Loop
25" long 42" stretch 130 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-100

Extension Spring 7' Door - 100 lbs Tan

Double - Loop
25" long 42" stretch 100 lb load
Sold individually
Same as part number 111
Rated for 10000 cycles

Spec Sheet

95-00115

Truck Door Rivet 1-1/8" Stainless Steel

Stainless steel construction
Round head design
Cross Reference: T #89217-0036

94-00002

Truck Door Clevis Pin 1/4" x 7/8"

Zinc Plated finish
1/4" x 7/8"

91-00506

Truck Door U-Bolt 1-3/4" long

Zinc plated finish
Used to attach cables to Whiting doors
Cross Reference: W #70-5

91-00402

Truck Door Rib Neck Carriage Bolt 1/4"-20 x 1.25" (9/16" head)

Zinc plated finish
Use rib neck carriage bolts with lock and keeper assemblies and hinge installations
Rib neck carriage bolt allows tamper proof installation with a rivet lock and eliminates the nut being installed externally for security.

28-02290

Truck Door 2" Vertical Track & Right Angle Assembly 96.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
For use with 1" diameter rollers

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White

DM11VL

Cable Drum Vertical Lift 11' 850-11 Pair

11' Vertical Lift aluminum die cast alloy.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
Rated Lift per Drum: 425 lbs.
Max. Cable Diameter: 3/16".
Mounting: 1" solid shaft with 1/4" keyway.

.......more details

27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

Black nylon drum with bearing
Cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines Left or Right drum (Left = Red)
Cross Reference: 2548

27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

Zinc die cast construction.
Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
Cross Reference: W #2518
2-3/16" I.D.

27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

26-94325

Truck Door Bottom Panel with Seal (15" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

Allows for easy door operation.
Seal protects cargo area from dirt and moisture
Will not bunch up as bottom panel goes around top curve.
Co-extruded using rigid PVC backing with flexible PVC seal against the door.
For use with right angle vertical track
Fits only right angle vertical track assembly.

.......more details

26-40018

Truck Door Bottom L-Retainer 84" Long for Todco Roll-Up Doors

Galvanized steel construction for extra strength and corrosion resistance.
Fits both standard and heavy-duty bottom seals.
Pre-punched holes for added convenience
Cross Reference: T #61191 W #4034 260000

26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14521

Truck Door Intermediate Panel (11" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

25E10220

Truck Door Top Closure Plate & Slide Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Included: Base plate slide bolt & flanged nut
Improved heavy-duty reinforced slide
Adjusts top panel for firm seal
Cross Reference: W #6944

25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #1208 T #70161

DM4X8

Cable Drum Standard Lift 8' 400-8 Pair

8' Standard Lift aluminum die cast alloy.
Pair includes: (1) LH and (1) RH Color coded: Red=LH and Black=RH
Max. Door Height: 8'-1".
Rated Lift per Drum: 265 lbs
Max. Cable Diameter: 1/8"
Mounting: 1" tube or solid shaft with 1/4" keyway

.......more details

25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

Steel construction Plain finish
Contoured for proper lock engagement
Cross Reference: W #2804

25-10578

Truck Door Handle Keeper Only for Whiting Roll-Up Doors

Steel construction Black E-coat finish.
Keeper accomodates padlocks and trailer seals
Cross Reference: W #7515

25-10577

Truck Door Cam Lock Handle Only for Whiting Roll-Up Doors

Steel construction Black E-coat finish.
Cam lock allows one hand operation and easily accomodates padlock or car seal.
Can be used as a lift handle in open position
Back plate is offset to clear bottom seal retainer
Spring assisted handle eliminates door bounce
Handle Keeper Sold Separately. Use part #25-10578

.......more details

DM518

Cable Drum Standard Lift 18' 5250-18 Pair

18' standard Lift aluminum die cast alloy.
Pair includes: (1) LH and (1) RH.
Color coded: Red=LH and Black=RH
Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
Max. Cable Diameter: 3/16". Mounting: 1" solid shaft with 1/4" keyway
Cross Reference: D525-216-1 DNS 5-18 OMI 2200

.......more details

Z9997

Hand Chain 25' for Manual Chain Hoists

Not SAE rated.
Designed for approx. 35 lbs

Z9004

Shaft Key Bent 3" x 1/4"

3" Bent Key
Zinc Plated Steel

DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Maximum Door Height: 32'-1".
Rated Lift per Drum: 1000 lbs.
Max Cable Diameter: 1/4".

.......more details

SF258

Spring Fitting 2-5/8" Pair

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .3310".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
Winding bar hole 1/2"

.......more details

CBB532

Stop & Sleeve 5/32" 100 pair

Includes 100 stops (9150000628) and 100 oval sleeves (9150000622)

CBB316

Stop & Sleeve 3/16" 100 pair

Includes 100 stops and 100 oval sleeves

H11G09

Hinge #9 x 11 gauge

11 gauge # 9 hinge - 0.90 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G02

Hinge #2 x 11 gauge

11 gauge # 2 hinge - 0.69 lbs
Bright zinc-plated
For use with 7/16" stem rollers

EP2984

Exhaust Port 4" with latch long barrel ** Discontinued**

4" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.
Polished aluminum finish.

25-10276

Truck Door Universal Center Hinge Flush Mount **To extent of inventory

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation
Cross Reference: H-325709

41C4220A

LiftMaster Chain Drive Gear & Sprocket Assembly

Installation Manual Manuel d'Installation

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

25-10001

Truck Door End Hinge for Todco Roll-Up Doors

Zinc plated steel construction
Four-knuckled to ensure smooth door operation
Cross Reference: T #69035 W #4007 220000

D-TEK-MVP

EMX Industries 9-220 volt Loop Detector 2550-1

Wiring harness ( HAR-11) sold separately
Warranty 2 years
Aluminum RF shield housing
Loop diagnostics
Frequency counter
Control contacts (gold plated)

.......more details

Installation Manual Spec Sheet

CUSTOM4X6PO

Devanco Loop 4'x6' rigid-pvc pave-over

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X15PO50

Devanco Loop 6' x 15' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

GAREX

Garex Premium Garage Door 1-3/4

specify size color details when ordering
Please call for pricing

CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

Stainless Steel Shaft no bearing design
Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
Rated for 200 000 cycles
Pound Load: 145 lbs

5001-14-BLACK

Residential Side & Top Weather-Strip 14' Long - Black

PVC wrapped
Painted aluminum retainer
Dual fin vinyl

DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

Activates two devices
Wire lead antenna
12 and 24 Volt models
Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
The receiver can be activated by any of the Delta-3 format transmitters
Mounting bracket supplied

.......more details

Installation Manual

27-83190

Truck Door W-Style Track and Operator 90 x 90 Door

Includes: 1 dual spring operator 2 horizontal tracks 2 vertical tracks

RA-LPL-KEYPAD

Lynx Wireless Proline Keyless Entry 303 MHz

Illuminated keypad
Weather shutter protects keypad from elements
1 to 6 digit codes for maximum security
Allows for access without remote or keys
Compatible with Lynx residential openers built from 2000+
Mounting screws and 9V battery included

.......more details

Compatibility chart

.363_6"-RH

Torsion Spring .363 x 6" x 12ft RH Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft

M8-705

Marantec Photoeyes 69190 / 97246

Works on all Marantec units
Includes brackets hardware and wiring
Same as item #86850 97246 used to be M4-705
Made in Germany

Installation instructions

.295_1-3/4"-LH

Torsion Spring .295 x 1-3/4" x 12ft LH Blue

Wire size: .295
Inside diameter: 1-3/4"
Length: 12 ft

MOD034

Manaras Monitored Photocell Upgrade N1 to N4

Ideal for industrial environments submersible and impact resistant.
Flexible design withstands and realigns after mechanical impact.
Max. range 45ft.
Incl. photoeyes 3ft of conductor wire and mounting hardware.
Applies to all operator models with electronic control "M" types.

GC-100

Devanco Foaming Glass Cleaner 538g

A powerful foaming glass cleaner goes on thick does not run and wipes off clean
Does not leave streaks or an oily film on the glass
Virtually odorless

Safety data sheet Fiche de données de sécurité

103146

Marantec Synergy 380 Residential Opener 1.1 HPCS Head Only

Equipped with over 1 HPCS of pull and push force
Ideal opener for large and heavy applications like carriage house doors or large wind-loaded doors
315MHz 2-channel remote control is included. Multi-bit code technology ensures interference free performance
Soft Start and Soft Stop functionality is reducing wear and tear on the operator system garage door and hardware
HomeLink compatible
Comes with 1.2 mm heavy-duty rail

.......more details