Devanco Canada - Get The Right Garage Door Opener‎ and Parts

3AG3

Miniature Fast Acting Glass Fuse 3 Amp 250V (5/pkg) - 766124

6 x 30mm miniature fast acting glass fuse
Rated voltage: 250V
Rated current:3A
ROHS compliant

32-48-180

Extension Spring 8' Door - 180 lbs Gold ** Replaced by 27-48-180

Double - Loop
32" long 48" stretch 180 lb load
Springs sold individually

Spec Sheet

.225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

1104-16FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-CLAYSTN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Claystone

Claystone rigid vinyl retainer with claystone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

41D217

Fits model 8550

PRO-HB-7511R-LH

Micanan 3/4HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Includes solenoid brake
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

89463

Marantec Deluxe Wall Control Panel w/ Light & Vacation Lock

This unit will work on any model Marantec garage door opener
Replaces part # 47307 65456 M3-543
Made in Germany

1104-7FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 7' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

.283-2-5/8-RH-C

Torsion Spring .283 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 2-5/8" Length: 12 ft

MW-00021

Micanan Splash Proof Cover Fully Assembled

Splash proof cover for models: PRO-H J HHD GH and GHC
Same as MP-00204

Q055

LiftMaster Limit Switch Kit K75-50189

Also known as: Q166 Q165

17JW

Rolling Steel 2" Flat Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

EP2982

Exhaust Port 4" with latch short barrel ** To Extent of Inventory

4" inside diameter 1/4" sleeve with latch.
Includes fasteners & gaskets.
Polished aluminum finish.

MK-00120

Micanan Heater Probe in Reducer Mod. (120V 20W 3/8" NPT)

.331_2-5/8"-LH

Torsion Spring .331 x 2-5/8" x 12ft LH Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft

41A4371

LiftMaster Belt Cap Retainer

Same as 41C4371

1-0418

RW Bow Handle Black Steel

Size: 191
Steel drilled for 1/2" dia bolt
Overall size: 13-1/2" h x 2" w. Handle projects 2-3/4" from doorface
Length of Grip: 8"
Depth: 1-7/8"

1404-12FT-SAND-XL

Residential Side & Top PVC Weather-Strip with cap 12' Long - X-Wide Sandstone (D)

Extra Wide Profile 2-1/2" wide
Flexible co-extruded cap to hide screws
Dual Fin PVC that seals against the door
Material: Rigid PVC / Flexible PVC Co- Extruded
Colors: Black Brown Bronze Cream Sandstone White
Lengths: 7′ 8′ 9′ 10′ 12′ 16′ 18′

.......more details

2807.177*250

Whiting Spring Assby .177 x 2-3/16 x 25" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 25" Long
For Roadside order part # 2806.177.250

2806.177*250

Whiting Spring Assby .177 x 2-3/16 x 25" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
Roadside
For Curbside order part # 2807.177*250

TD-134

SteelCraft Therm-O-Door Commercial White 20-Gauge *** By Quote Only

THERM-O-DOR® sets the industry standard in overhead commercial and agricultural garage doors.
TD-134 R-Value: R-16 1-3/4" Thick
Available in White only
Sold by quote only

ALUM-510

Aluminum 24" x 100' Spool Canyon Clay / Argile # 510

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 510
Reverse side is #431 Bright White

1634-112-W

Elton Commercial Window for Flush Doors 1-1/2" thick 16x34 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 35-1/8" x 17-1/8"
Cut-out size: 33-7/8" x 15-7/8"
Vision area: 31-3/4" x 13-11/16"
Different glass options and frame colours are available upon request

.......more details

SBR-N1-0R-H120

Micanan Brake Assembly for PRO-HBH RH 120V Solenoid included

Solenoid Included

1005-3-18'

Aluminum Bottom Retainer 3" U-Shaped 18' Long

For door thickness 3"

GHX-311-1-RH

Doorlec Explosion Proof Gear Head 1 HP 120V 1PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

93519.5260

Todco Side Seal 80" long Lip ** Special Order Quote Only

Special Order item. Must be quoted each time
Fits Fleetstar Door

2200-215

Linear Precision Bearing 5/8"

5001-7-SANDSTONE

Residential Side & Top Weather-Strip 7' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

BEA-10LIGHT-A

BEA Modular LED Signal Light Audible Segment

Audible Alarm 2.6 KHz ±250 Hz oscillation frequency; maximum intensity 92 dB @ 39.6 in

K17-36530

LiftMaster Gear Reducer and Motor Pulley

Includes gear and reducer pulley motor pulley
Includes dual-set screw fastener
Groove-lock channel on each pulley
For LiftMaster CSL Series commercial slide gate operators

MGH-6215-M-N1-RH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H

SUPPORT002

Manaras Board Support Rivet 0.236" Black ** Special Order Only

P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

Allstar compatible
Three channel transmitter
8 dipswitches 318 MHz

Programming Instructions

OSHW-6112-M-N4-R

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

TS-1-135-GALV-KEY

Tube Shaft 1" x 135 (11'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-111-GALV-KEY

Tube Shaft 1" x 111 (9'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

CPT210-END-KIT-U

Miller Edge Universal End Kit for CPT210

Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws

E/BLOP/116

Automatic Systems Anti-Corrosion Base

31226

Doorlec Sprocket 41B48-1" shaft

15-50B72LGH

Sprocket 72 Teeth 1" Bore 1/4" Keyway w/SS

Same as 71-1550b72LGH

RDRG63.3.1-1:1/2

Maximum Output Torque Generated Chain Hoist Rolling Door w/4B60HD-1:1/2K3/8-2S5/16SQ ** Spec Order

PB-001

Skylink Garage Door Wall Button

Install the Skylink Wall Button inside your garage.
Allows manual operation of your garage door opener.
Illuminated LED indication.
Easy to Install.
30-foot Wire Included.
Mounting Hardware Included.

.......more details

GALV-343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

SHSS-38-1

Set Screw Square Head 3/8" x 1"

Natural black
16 threads per inch

MA008

LiftMaster Pulley Gear Reducer 8"

Also known as: MA-008
Compatible with various LiftMaster® Gate Operators

26141-NEW

Doorlec Cam Shaft 11-1/4" x 5/8" (28.575 x 1.59cm)

Fits the new larger box

H11G07-SS

Hinge #7 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

RB-TX10C

Miller Edge RBand Monitored Wireless Edge Transmitter

RBand transmitter only
On board diagnostics allows for easy set up and troubleshooting.
Offers pulsed and normally open outputs.
Ideal for commercial door operators manufactured after 2010.
Bi-directional link improves immunity to RF interference.
Nema 4

.......more details

K41-0252-000

LiftMaster Gear Reducer IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Gate Operators

K41-0243-000

LiftMaster Output Sprocket IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators

5001-8-CREAM

Residential Side & Top Weather-Strip 8' Long - Cream

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

CP-SH-34-MC3-65

Lynx Complete Limit Shaft Assembly #65 Chain

For trolley operator

IP-MONSQ

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System (Square)

Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in white.
IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
Square shape (available in rectangular shape: IP-MON)
SIP Server
Operating temperature: -10C to 55C
Call recording and built-in memory

.......more details

OGH-6232-M-N1-RH

Manaras 1/2 HP 208V 3Ph Gear Head Operator w/Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OPJ-6433-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 480V 3 Ph Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

HARNESS116

Manaras Opera ECB070 and Drive

OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

OTBH-6212-AM05

Manaras Trolley Operator 1/2 HP 240V 1Ph Monitored Board w/Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

8071-080

DoorKing MicroPlus 3-btn Rolling Code Transmitter

Keychain style remote
Black
Not compatible with HomeLink
Dimensions: 2.5 x 1.5 x .5 inches

BCSI-PM21

Pivin Drapeau Flat Washer 3/8 Special *** Price by Quote Only

BCSI-PM17

Pivin Drapeau Secondary Shaft *** Price by Quote Only

2300-697

Linear Idler Wheel UHMW

OGH-6535-M-N1-LH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OGH-6535-M-N1-RH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

HAE00087

Linear Safety Beam Sender & Receiver with Wire

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.
Replaced HAE00002

LEDSTRIP004

LED Light Strip (1 Unit) Red/Green/Blue 96" 24VDC

An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option

Installation Manual

10-BR2900

BEA 2 Relay Logic Module + 900MHZ Wireless Technology

2 relay logic module ideal for applications requiring sequencing of electric locking devices and automatic door activation.
Day/Night mode allows users to designate "secure" or "unsecure" access for controlled entry points.
Push plates with wireless transmitters can be programmed to operate during specific time periods.
Programmable transmitters per receiver: 75 (unlimited for universal timer)
Input: DRY contact
Temperature rating: -22 to 158F

.......more details

SHAKER-R16

Garex Ready to Install Door Special Order

Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
Panel Width: Up to 24 feet (732 m)
Texture: Woodgrain
Offered in various choices of colours

CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake optional **
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

CPT215-PER-FOOT

Miller Edge Field Configurable Sensing Edge Cut-to-Length

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Minimum Length: 3ft

.......more details

CPT-215-50

Miller Edge Field Configurable Sensing Edge 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Lead Wire 12 in. 22 gauge SJTO

.......more details

GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

10FALCON-EXW100

BEA Falcon Wide Explosion Proof HSG 100ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX Wide can be mounted from 11 ½ – 21’ to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX W: 30’ × 11’ @ 21’
Operating termperature: -22-140F

.......more details

DOCK-SEAL-R100

Dock Seal R-100 Fixed Header Seal Price by Quote Only

Made to order - Price varies according to specifics
This model is ideal for door openings of 8′ wide x 8′ high
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time

.......more details

GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

K41-0380-000

LiftMaster Bridge Rectifier 700/1200

For Maxum ops

K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

Maxum J-1200

CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
Chain Spreader for Maxum for 1" door shaft

GALV-406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

DWI-LOCK

Doorway Impact Monitored Slide Slock V2

Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
Connects to an Air/Impact switch to mechanically and electrically lock the door.

E/1907/012

BLG76 Backup Spring Assembly

RGH-6214-MON-RH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

Rapido version of model OGH
Includes PHOTO-061 Monitored N4X Thru-Beam eyes

MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

MODKIT027 for field install simply plugs into the control board
Controls several auxiliary devices such as Strobe horn fan lights etc
Works with BOARD060
Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.

OTBH-6212-M-N1

Manaras Trolley Operator 1/2HP 240V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

.......more details

15-50B32QGH

Sprocket 50B32 1.25 Bore 1/4" w/SS

71-1550B32QGH is a 32 Tooth Sprocket Kit 1-1/4" Bore x 1/4" keyway (50B32-114)
For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details