30B530:LiftMaster Capacitor 56uF 220V ** discontinued

70225.000

Truck Door Todco 2" White Nylon Quiet Roller ** Price by Quote Only

2705.148_140

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 14" Long
For Roadside order part # 2704.148*140

2704.148_140

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 14" Long
For Curbside order part # 2705.148*140

7-6111

RW Hanger 323S Truck & Pendant Sold Individually

Size: 323S
Truck: Same as 323 Hamger
Pendant: 1/2" diameter Steel Zinc Plated
Fasteners: (1) 5/8" washer (1) 1/2" hex nut (1) 1/2" locking nut
Capacity: 1 pair for maximum door weight of 400 lbs
Shipping weight: 1-1/2" lbs

2704.143_150

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 15" Long

Torsion spring for cube trucks with small roll-up doors
Specs: .143 x 2-3/16" x 15" Long
For Curbside order part # 2705.143*150

2705.143_150

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 15" Long

torsion spring for cube trucks with small roll-up door
Specs: .143 x 2-3/16" x 15" Long
For Roadside order part # 2704.143*150

7-6113

RW Hanger 27B Truck & Pendant Sold Individually

2704.156_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Curbside order part # 2705.156*180

2705.156_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Roadside order part # 2704.156*180

10.1002.36

Truck Door Rivet 1/4 x 1-1/8 - 3/4 HD for #7515 Keeper Sold per Unit

Standard rivet used for installing #7515 Keeper
3 rivets are required per keeper

10.1002.9

Truck Door Rivet Mild Steel 1/4 x 1-5/16 - 1/2 HD Sold per Unit

Standard rivet used for installing #77 lock
5 rivets are required to install the handle Sold separately

26-40050

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40045
Cross Reference: W #8280

25E10272

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors (2 Stud)

Steel construction Black E-coat finish
Stud plate for 2 stud
Cross Reference: W #2032

26CW945255

Truck Door Intermediate Panel (15.5" x 98") Painted White for Whiting Dryfreight

These panels are 15.50" height x 98" width.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

91-00401

Truck Door Step Bolt 1/4"-20 x 1.50" (3/4" head)

Zinc plated finish
Cross Reference: T #80015-1610

26-40019

Truck Door Bottom L-Retainer 90" Long for Todco Roll-Up Doors

Galvanized steel construction for extra strength and corrosion resistance.
Fits both standard and heavy-duty bottom seals.
Pre-punched holes for added convenience
Cross Reference: T #61191 W #4034 260000

10.1054.1

Truck Door Pop Rivet 1/4" ColdSaver/TempGuard Doors

Mild steel construction
Used in Cold Saver and Temp Guard doors

.192_2-3/16_60L

Truck Door .192 x 2.188 x 60 CTD RAW LHW

.192 x 2-3/16 x 12'

27-83190

Truck Door W-Style Track and Operator 90 x 90 Door

Includes: 1 dual spring operator 2 horizontal tracks 2 vertical tracks

15

Whiting Truck Door Center Hinge

2996

Truck Door 2" Steel Roller 3" Stem Enclosed Bearings for Whiting Roll-Up Doors

A Whiting original

30-94225

Truck Door Bottom Panel w/ Seal & Retainer (15" x 98") Steel Clad White Enamel Finish

1/2" thick (13mm) composite panel consisting of a high density polyethylene (HDPE) core between two galvanized steel skins
Baked on white enamel finish
Black E-coat/powder coat spring assisted steel lock eliminates door bounce
One-piece extruded rubber head seal
Tongue and groove joints
Stainless steel rivets/black e-coat/powder coated components
Nylon rollers for use with 2" track
One-piece flexible PVC bottom seal
End hinges have removable covers to allow easy roller replacement
Designed for use with dual spring operator

26CW14522-CUT

Truck Door Intermediate Panel (12" x Cut-To-Size) Painted White for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

10.1002.3

Truck Door Rivet with Splines 1/4" x 1" Steel

Mild steel construction
Round head design 3/4" head
Standard hinge rivet

10.1002.23

Truck Door Rivet with Splines 1/4" x 1-1/32" Stainless Steel

Stainless steel construction
Round head design 11/16" head

2705.148_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 18" Long
For Roadside order part # 2704.148*180

2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 18" Long
For Curbside order part # 2705.148*180

25-60006

Truck Door T-Style Replacement Hardware Pkg Set**To Extent of Inventory

Package set consists of (2) 1" door rollers (2) T-style end hinges (2) T-style center hinges and 16 nuts 16 washers & 16 bolts
Zinc plated

28-32082

Truck Door 2" Horizontal Track with 8" Radius 120" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

25-01426

Truck Door 1/8" Stainless 97" 1/4 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Nylon ends are used on 1/4" eye cables

26CW94623-CUT

Truck Door Top Panel Painted White (13" x Cut-to-Size) for Whiting DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
Non-routed
.75" thick 7 ply exterior grade medium density plywood
Painted white

26CW945215-CUT

Truck Door Intermediate Panel (11.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

2996.3

Truck Door 2" Steel Roller 5" Long Stem Enclosed Bearing for Whiting Roll-Up Doors

A Whiting original

25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
Vehicle is now ready for roll-up door installation
Corner post has added lip length to allow easier weld during installation
Steel construction .125 thick
Each bulk kit includes two (2) corner posts and one (1) header
Plain finish

27-24416

Truck Door Dual Torsion Spring Assembly 96/33 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 96" Spring Length: 33" Wire diameter: .182 Winding cone color: Green

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels are routed and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.
Curbside hardware shipped loose

22-01184

Truck Door Three Whole Hinge Utility Style

Aluminum Extrusion
Cross Reference: Utility #3-4100-0022

26CW94523-CUT

Truck Door Intermediate Panel (13" x Cut-to-Size) Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

26CW94521-CUT

Truck Door Intermediate Panel (11" x Cut-to-Size) Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

26CW94525-CUT

Truck Door Intermediate Panel (15" x Cut-to-Size) Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

26CW94323-CUT

Truck Door Bottom Panel with Seal (13" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

91-00700

Truck Door Elevator Bolt 1/4"- 20 x 1-3/4" 1" head

Zinc plated finish

26CW94322-CUT

Truck Door Bottom Panel with Seal (12" x Cut-To-Size) Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

26CW94222-CUT

Truck Door Bottom Panel with Hardware (12" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

26CW94625-CUT

Truck Door Top Panel w/o Hardware (15" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design

26CW945255-CUT

Truck Door Intermediate Panel (15.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

22-00627

Truck Door Grab Handle 13" Chrome Steel

Steel construction Chrome finish
Cross ref: Eberhard 4300

26CW942255-CUT

Truck Door Bottom Panel with Hardware (15.5" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login

LiftMaster Capacitor 56uF 220V ** discontinued

DETAILS