Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search stainless steel
STRUT-2-1/4-16'-NH

Door Strut 2-1/4" Non Hemmed 16ft Long

  • Reinforcement bar 2-1/4"
STRUT-3-20'

Door Strut 3" Hemmed 20ft Long

  • Reinforcement bar 3"
GAREX-EB-PLATE

Garex End Bearing Plate 3-3/8" Special Order

K74-34821

LiftMaster Reset Switch

  • Complete with reset button and mounting bracket
SSZP15-6-114

Solid Shaft 1-1/4" Keyed 15'6" Zinc Plated

  • Actual length is approx. 15'-6"
346

Cable Clamps Galvanized 3/16" Sold per piece

  • Galvanized malleable cable clip
.343-514-R

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
C-514-INSTALLED

Cones 5-1/4" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF514U
TILT-5

Tilt Detector

  • State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
  • Safeguards against rolling steel door failure where conventional devices miss
  • Automatically stops the operator to keep door within safe parameters
Sell sheet
41A5021-5I

LiftMaster Electronic Circuit Board Assembly 390MHz *** NLA

  • 1 piece logic board with end panel
  • Used on 390Mhz Security+ AC belt drive operators made from 1997 to 2005.
  • Unit will have a red/orange learn button
  • Also know as 41A5021-D 41A5021-5E 41A5021-5F 41A5021-5G 41A5021-5H 041A5021-5I
7001-7-CHARCOAL

Commercial Side & Top Weather-Strip 7' Long - Charcoal 7001-HH (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
MGH-6114-ECB-RH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation manualSell sheet
K72-13057

LiftMaster Clutch Shaft Kit APT

  • Kit contains: Clutch Plate Clutch Shaft Bearing 3/4" I.D Sprocket 41B10x3/4" 5L Belt Motor Pulley Spring Clutch Disc Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener.
5001-7-BLACK

Residential Side & Top Weather-Strip 7' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
1104-14'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
60-7254

Wheel Chock Wall Bracket Anchors 4/pkg 3/8" x 1-7/8"

  • Anchors only. Set of 4
60-7252

Wheel Chock Wall Bracket 14"w x 8"h x 4-1/2"d Painted Grey

  • Wall bracket only
  • 4-1/2" projection
HTR-460

LiftMaster Heater Kit for AC Pad Mount Gate Operators 460V Only

  • Heater kit for pad mount 460V AC gate operators.
  • Includes transformer
  • Battery bracket NOT included.
  • Protects system to -40° F and installs on operator frame
SA1906/031

AS1320 Logic with Top Cover Assembly BL3X SAV

5001-WG-9-MOAK

Residential Side & Top Weather-Strip 9' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
5001-WG-8-MOAK

Residential Side & Top Weather-Strip 8' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
1104-8FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 8' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
PRO-HBH-10023U-R

Micanan 1 HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

  • 1 HP230V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
CB116A0250

Cable 1/16" 7x7 250' Galvanized

  • Galvanized cable 1/16" 7x7 250ft spool.
MK-00042

Micanan Overload Reset 1-Phase 13 Amps

KH-3.5

Magnetic Key Hole 3-1/2" Tall

  • Decorative key hole only
  • Black flexible magnetic material with deep embossed design
28020024-500

Cable Stainless 3/8" 1x19 500' Inox ** Price on request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

  • Priced per each
2B735

LiftMaster Main Board EL25 (041B0735)

  • Same as 041B0735
OSH-6113-CONT-L

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation manualSell sheet
MGS20-Y-2L-05

Miller Edge Sensing Edge Square Yellow 2-Wire Left Hand Outlet 5ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
MGS20-B-2U-06

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 6ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
K20-5150LD

LiftMaster Electric Motor 1/2HP 120V MT/MH Motor

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

  • An original Whiting assembly
CP-BRG-58

Lynx Bearing 5/8"

  • 6 in total on a MCJH
1104-9'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
OSH-6112-CONT-R

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
9150000620

3/32" Sleeve ONLY 100/pkg

  • Sleeves only 100 per pack
.250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
TC134-8

Top Cap 1-3/4" 8 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
.295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
25-4003-K

LiftMaster 2.6-3.7 Amp Overload Fuse

  • For models: SL595-200-53
MO00001

Micanan Cam Plate Compression Spring (.178 ID)

  • 2 required per operator
  • .178 ID x 032G x 55L)
MJ00004

Micanan Clutch Plate Aluminum 3/4" ID

412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Installation Manual
2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
4011-12FT

Aluminum Retainer only for Light Brush or Vinyl Insert 12' Long 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • For applications that require dual brush or brush and vinyl
GH4416-03-L

Green Hinge #3 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-03-R

Green Hinge #3 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
COUPLING002

Manaras Disconnect Coupling for MJH ** NLA Sold in Kit only** Use MOUNTSHAFT010 or 010A **

  • If MJH is manufactured prior to 1998 4 x PIN016 are required
  • If MJH is manufactured after 1998 2 x PIN016 are required
  • PIN016 sold separately
27-48-340

Extension Spring 8' Door - 340 lbs Blue

  • Single - Loop
  • 27" long 48" stretch 340 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-150

Extension Spring 8' Door - 150 lbs Red

  • Single - Loop
  • 27" long 48" stretch 150 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-130

Extension Spring 8' Door - 130 lbs Yellow

  • Single - Loop
  • 27" long 48" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G07-SS

Hinge #7 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

  • For use with LiftMaster LA500 Series swing gate operators
  • Includes ID resistor kit
  • Includes LA500 product ID
4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
SL18-ZP-COPPER

Zinc Plated Copper Sleeve 1/8" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST18COP. Stops are not zinc plated
PRO-HB5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Includes solenoid brake
Installation manualSpecification sheet
271723

Rolling Steel Slide Bolts for Bottom Bar D679

66003102

Rolling Steel Universal 1/2 Slat Sold per Foot

7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

  • A Whiting original
SLT14-22

Rolling Steel 3" Flat Slat 22-ga Galvanized

SLT2-20P

Rolling Steel 2" Crowned Slat 20-ga Primed

.375-6-RH-C

Torsion Spring .375 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .375 ID: 6" Length: 12 ft
.363-6-LH-C

Torsion Spring .363 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 6" Length: 12 ft
.331-5-1/4-RH-C

Torsion Spring .331 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 5-1/4" Length: 12 ft
.331-2-5/8-LH-C

Torsion Spring .331 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 2-5/8" Length: 12 ft
.312-5-1/4-RH-C

Torsion Spring .312 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 5-1/4" Length: 12 ft
.306-6-LH-C

Torsion Spring .306 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 6" Length: 12 ft
.306-2-RH-C

Torsion Spring .306 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 2" Length: 12 ft
.295-6-LH-C

Torsion Spring .295 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 6" Length: 12 ft
.295-5-1/4-LH-C

Torsion Spring .295 x 5-1/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 5-1/4" Length: 12 ft
.273-1-3/4-RH-C

Torsion Spring .273 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 1-3/4" Length: 12 ft
.262-2-RH-C

Torsion Spring .262 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 2" Length: 12 ft
.262-1-3/4-LH-C

Torsion Spring .262 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .262 ID: 1-3/4" Length: 12 ft
.250-2-RH-C

Torsion Spring .250 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .250 ID: 2" Length: 12 ft
.243-2-RH-C

Torsion Spring .243 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .243 ID: 2" Length: 12 ft
.234-2-LH-C

Torsion Spring .234 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2" Length: 12 ft
.225-2-5/8-RH-C

Torsion Spring .225 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2-5/8" Length: 12 ft
.225-1-3/4-LH-C

Torsion Spring .225 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 1-3/4" Length: 12 ft
.218-2-LH-C

Torsion Spring .218 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .218 ID: 2" Length: 12 ft
RN0034-SS

Roller 3" White Nylon 4-3/4" stainless steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles for a 12' door
  • Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.
DF090.2

Whiting Dry Freight Door 3/4" without Track or Balancer

  • Original Whiting dry freight replacement door for serial # 99164
MQ00012

Micanan Adjustable Cable Stopper Gold C/W Set Screw Sold per piece

  • Used on all Micanan waterproof and corrosion proof units that have brakes as well as all explosion proof units.
  • Comes with set screw 3/16” x ¼”
SOLID_SHAFT_20'

Solid Shaft 1" Keyed 20 ft Galvanized

  • Actual length is approx. 20'-1"
SPR41B12X1

Sprocket 41B12 1" Shaft 1/4" keyway 2SS 5/16"

CHAIN058

Manaras #410 chain 48 Pitch (24" long)

OGH-6214-ECB

Manaras 1 HP 240V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OGH-6433-ECB

Manaras 3/4 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OTBH-6214-1-ECB

Manaras Trolley Operator 1 HP 240V 1 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OTBH-6212-ECB

Manaras Trolley Operator 1/2 HP 240V 1Ph with Electronic Circuit Board

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
OHJ-6214-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 240V 1 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OPH-6434-ECB

Manaras Opera-H 1 HP 480V 3 Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPH-6433-ECB

Manaras Opera-H 3/4HP 480V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPH-6233-ECB

Manaras Opera-H 3/4HP 208V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPJ-6114-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 120V 1 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
17-10165

LiftMaster Pulley 7"