Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MP-00077

Micanan Heavy Duty Front Idler (Trolley End Bracket) #41 w/Pillow Blocks

MV-00214

Micanan Tele 8" Wand (For Utility Switch)

PRO-PANEL

Micanan Custom Panel

Made according to customer's requirements

MV-00220

Micanan Pull Cord DPST Swivel Type - Nema 4

MV-00012

Micanan 3-btn O/C/S w/Key Lock-Out Metal Housing Nema-4 Pushbutton Control Station

Surface mount
Metal Housing

MV-00011

Micanan 3-btn O/C/S w/Key Lock-Out Nema-4 Pushbutton Control Station

Surface mount

MK-00522

Micanan Relay 24 VAC 8-Pin Plug-In

ME110-2W-BLK-R

Miller Edge 2-Wire Black Right Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling that allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Sell Sheet

50740

Doorlec On/Off Switch 575V 3Ph Gate Op

20amp

PRO-J-10081-U-LH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

.312-514-R

Cut-to-Length Torsion Spring .312 x 5-1/4" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.306-514-R

Cut-to-Length Torsion Spring .306 x 5-1/4" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

.243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

PRO-J-7523-U-LH

Micanan 3/4HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-7521-U-RH

Micanan 3/4HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-7581-U-RH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-LJ-5011-U-LH

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Left Hand

On-Board receiver holds up to 20 transmitters

PRO-GT-10043-U

Micanan 1HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7583-U

Micanan 3/4HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5023-U

Micanan 1/2HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

.406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.375-514-R

Cut-to-Length Torsion Spring .375 x 5 1/4" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

PRO-APT-7553-U

Micanan 3/4HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-APT-7543-U

Micanan 3/4HP 460V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-APT-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-TB-10011-U

Micanan 1 HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5038-U

Micanan 1/2HP 380V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5025-U

Micanan 1/2HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5081-U

Micanan 1/2HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

88-8XL

Wheel Chock 88-8XL Laminated Rubber Galv. Steel Sides

Made From Used Truck Tire Laminates Compressed and Fastened Under High Pressure
Galvanized Steel Sides
Size: 11-1/4" wide x 14" long x 14" high

CBI-087

Wheel Chock CBI-087 Cast Ductile Iron

Cast Ductile Iron for Impressive Strength
Painted Yellow for High Visibility
Size: 8-1/4" wide x7-1/4" long x 8-1/2" high

BPPB1758

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 96"(8')

2200-926

Linear Gear Reducer 60:1 Models SWR SWD

DJ501L5

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
DJ operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology
Security+ 2.0®

.......more details

15475

Doorlec Heater Strip 250 W 208/230 V

RATCHET_BAR

Ratchet Bar for Holdown Assembly 8-8786 ** Quote Only

E/1929/070

Automatic Systems Spare Arm 14'-9" (BL229)

Used on the BL229 gate op.

ME123-C7

Miller Edge Flat 3-1/2" Wide PVC Mounting Channel Sold by the Foot

BB

Molded Rubber Bumper Black 24" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
24" L x 10" W 4" Projection

.......more details

T

Molded Rubber Bumper Black 22" L x 10" W x 12" W 3" Projection Centered Reflector 3-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

LVB1224-11

Laminated Bumper Black 12" Projection Vertical Installation 24" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB1010-14

Laminated Bumper Standard Black 10" x 14" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB924-11

Laminated Bumper Black 9" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-14

Laminated Bumper Standard Black 12" x 14" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB910-24

Laminated Bumper Standard Black 10" x 24" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB412-24SF

Steel Faced Laminated Bumper Black 12" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB406-24SF

Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

Q080

LiftMaster Dolly Latch Kit K75-50138

For Liftmaster trolley operator HCT

TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LVB624-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LLB620-22

Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.
This model has angles on both sides

.......more details

LVB630-11

Laminated Bumper Black 6" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-24

Laminated Bumper Standard Black 10" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

44-60-280

Extension Spring 10' Door - 280 lbs Gold ** By Quote Only

Clipped ends
44" long 60" stretch 280 lb load

MK-00546

Micanan Heater Probe in Reducer Mod. (24V 20W 3/8" NPT)

TOP-BK-PCG

Powdercoated Commercial Top Bracket Adjustable 1-Bolt Grey

Powdercoated Grey
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

MD-00060

Sprocket 50B36 1-1/4" shaft 1/4" KW 2SS 5/16"

36 tooth sprocket for #50 chain

K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

108135.0002

Overhead Poly Type V- Belt for Old RG 32" *** by quote only

ME00037

Micanan Clutch Shaft Only for PRO-LH

.363-334-R

Cut-to-Length Torsion Spring .362 x 3-3/4" Right Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

41C5497

LiftMaster Wiring Harness Kit High Voltage

For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001

MP-00002-460V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

Controlling action of two lights- sockets supplied on cover

Q209

LiftMaster Gear Reducer Pulley K17-50223

DC-1000 1/2" ID

33223A

Genie Bushing

Drive shaft bushing on PMX500 Chain Glide

.393-514-R

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

4X12SC50

Devanco Loop 4' x 12' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation manual Manuel d'installation Loop placement guide Guide de positionnement des boucles

MK-00519

Micanan Surface Mount Fused Disconnect Modification

Mounted to control panel cover in lieu of primary fuse block inside panel

MB-01002

Micanan Electric Motor Only 1/2HP 110/220V 1PH Base Mount TEFC FR56

Base Mount TEFC electric motor
Fits models: TW TBW JWHWHHDW SDW

.306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Red

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

MK01245

Micanan Fuse 3A 250V Sold Individually

For Micanan circuit boards
Sold per fuse

MG020-Y-2E-03

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 3 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

LVB424-11

Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

PRO-HBH-5011U-L

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

5-36-8

2" Vertical Track 14-GA 13'-4" (14' door) Sold per Pair

PRO-HB-5053U-RH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

5001-12-DK-BROWN

Residential Side & Top Weather-Strip 12' Long Commercial Brown

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

5001-14-DK-BROWN

Residential Side & Top Weather-Strip 14' Long Commercial Brown

PVC wrapped
Painted aluminum retainer
Dual fin vinyl

AW14K500-18

Miller Edge Air Wave Kit 18ft No Coil Cord

AW14 18ft. of RAH-500 P-50H 218-27-18 P50
Kit Includes: AW14 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

PIVIN-BCSI

Special Order BCSI Gate Operator ** Price by Quote Only

PIVIN-BCSI-BASE

Base Only for BCSI Gate Operator

MB-05507

Micanan Electric Motor Only 1 HP 230/460V 3PH Base Mount TEFC FR56

PRO-HBH10011U-L

Micanan 1 HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

CA-104-412

Continuous Angle 1-1/2" x 4-1/2" x 104" L Sold per Piece

MK00709

Micanan Varistor Harness 460V with Red Wires

K20-1100C-2LP

LiftMaster Electric Motor 1 HP 115/230V 1Ph Logic *** To Extent of Inventory

MK-00429

Micanan Reversing Relay 24VAC Coil 4-Pole QPDT 14-Pin Flange Mount

For PRO-LJ LH LHAB

C-24-12-2-W

Thermal Window 24" x 12" for 2" Door White

For 2" thick door

ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL14COP

TXMQ-2:1

Grove Gear Gearbox 2:1 Ratio 56C

To replace serial # 70518900

MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

PRO-H-5053U-RH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

K15-41B17LKGH

LiftMaster Q070 Output Sprocket

Sprocket for #41 chain

PRO-H-7511E-LH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes