Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search ysg
PRO-J-10053-U-LH

Micanan 1HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
  • Emergency disconnect with electrical cut-out switch for manual operation
  • Three button open-close-stop control station Nema-1
  • #41 roller chain & sprockets on all internal drives
  • #50 roller chain and sprockets on final drive
  • 1" permanently lubricated & sealed ball bearings on final drive shaft
  • External radio control terminal strip
Specification Sheet
PRO-J-10043-U-RH

Micanan 1HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
CP-SH-34-1712-EXP

Lynx Clutch Shaft Assembly for Explosion-Proof HDC Operators

  • Modified for explosion-proof operators
  • 3/4" x 22 x 3-1/2" thread
25005

Doorlec Cam Shaft with G018 Explosion Proof

MG-00054

Micanan Plastic Spacer for Boards (Medium Length 0.768)

MK-00704

Micanan Harness 1-Phase Contactor Board

MK-00016

Micanan Fuse Holder

MK-00049

Micanan Overload Reset 3-Phase 1.8 - 2.6 Amps

MK-00047

Micanan Overload Reset 1-Phase 25 Amps

MK-00044

Micanan Overload Reset 1-Phase 17 Amps

MK-00046

Micanan Overload Reset 1-Phase 20 Amps

MK-00035

Micanan Overload Reset 1-Phase 6 Amps

MK-00137

Micanan Transformer 600V-24V-100VA

MV-00272

Micanan Key Switch O/C Single Gang Nema 1 Flush Mount

MV-00017

Micanan Key Switch O/C/S Btn Tamper Proof Nema 1 Flush Mount

SPR60B18X1

Sprocket 60B18 x 1" Bore 1/4" KW

  • Same as MD00425
OSH-6434-ECB-LH

Manaras Opera-SH 1 HP 480V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
PRO-J-10081-U-RH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
.421-334-R

Cut-to-Length Torsion Spring .421 x 3-3/4" Right Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.437-514-R

Cut-to-Length Torsion Spring .437 x 5-1/4" Right Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.363-514-R

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Green/White

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-514-INSTALLED
.406-334-R

Cut-to-Length Torsion Spring .406 x 3-3/4" Right Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.319-514-L

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.319-514-R

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.306-514-L

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.295-514-R

Cut-to-Length Torsion Spring .295 x 5-1/4" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.283-6-R

Cut-to-Length Torsion Spring .283 x 6" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
BOLLARD_4'

Bollard 6" Dia. x 1/4" x 48" High Capped (w) Base Yellow Powder Coat

  • 6" Diameter 1/4" Steel Wall 48" High Base Plate is 10" x 10" x 1/4" Thick 5/8" Holes for Mounting Powder Coated Yellow
PRO-J-7581-U-LH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-5083-U-LH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-5021-U-LH

Micanan 1/2HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-LJ-5021-U-LH

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Left Hand

  • On-Board receiver holds up to 20 transmitters
.273-258-L

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
PRO-APTB-7543-U

Micanan 3/4HP 460V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
PRO-APT-7583-U

Micanan 3/4HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-7521-U

Micanan 3/4HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO ATPE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-7523-U

Micanan 3/4HP 230V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-5043-U

Micanan 1/2HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
PRO-T-5053-U

Micanan 1/2HP 575V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
PRO-T-5025-U

Micanan 1/2HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-5081-U

Micanan 1/2HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
2806.206.325

Whiting .206 x 2-3/16 x 32-1/2" Roadside with Cones

60-7248-CBI087

Wheel Chock Safety Pkg incl'd: yellow ductile iron chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) CBI-087 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Cast Ductile Iron for Impressive Strength
  • Painted Yellow for High Visibility
  • Size: 8-1/4" wide x7-1/4" long x 8-1/2" high
1004-134-16'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 16 ft***Actual Length 16'2"****

  • For door thickness 1-3/4"
PRO-GH-20053-PNL

Micanan 2 HP 575V 3P Gearhead Operator NO CONTROLS *** Price on Request

  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Universal Right or Left Hand mount
Installation manualSpecification sheet
MV-00133

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Pilot Light 24V ** DISC..

LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1†diameter.
    • .......more details
LB1212-36

Laminated Bumper Standard Black 12" L x 36" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB912-24

Laminated Bumper Standard Black 12" x 24" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB912-12

Laminated Bumper Standard Black 12" x 12" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB910-36

Laminated Bumper Standard Black 10" x 36" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB812-12

Laminated Bumper Standard Black 12" x 12" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB812-14

Laminated Bumper Standard Black 12" x 14" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
TB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB412-24SF

Steel Faced Laminated Bumper Black 12" x 24" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
TVB620-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
TB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB612-18SF

Steel Faced Laminated Bumper Black 12" x 18" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB612-36

Laminated Bumper Standard Black 12" x 36" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB610-18

Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
LB412-36

Laminated Bumper Standard Black 12" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1†diameter.
    • .......more details
1324-1-3/4"-BLK

Elton Commercial Window 1-3/4" thick 1324 Black Frame Sealed Glass ** Discontinued

  • Screw together window kit
  • Plexiglas window
  • Frame size tip-to-tip: 26-3/4" x 14-1/2"
  • Cut-out size: 25-5/8" x 13-3/8"
  • Vision area: 23-7/8" x 11-9/16"
  • Different glass options and frame colours are available upon request
    • .......more details
34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

34115

Doorlec Awning Pulley 194 x 1"

  • Used on model LDJ & LDJ-3
HINGE-811-PCG

Powdercoated Hinge #8 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #8 - 0.87 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-411-PCG

Powdercoated Hinge #4 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #4 - 0.74 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-311-PCG

Powdercoated Hinge #3 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #3 - 0.73 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
K94-36934

LiftMaster Main Wiring Harness L5

PRO-PL-INV-200-23

Micanan Wall Mounted Control Panel with Variable Frequency Drive Mod. 2HP 230V 3 PH

  • Additional charges apply for adding PBS on cover or if panel is not ordered with an operator
MD-00060

Sprocket 50B36 1-1/4" shaft 1/4" KW 2SS 5/16"

  • 36 tooth sprocket for #50 chain
MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

90-PGR

LiftMaster Parking Gate Radio Mod. Kit

  • G90PGR includes the limit switch wiring and bracket.
  • Used on PG HBG and BG models.
ALUM-5P3

Aluminum 24" x 100' Spool Espresso # 5P3

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P3
  • Reverse side is #431 Bright White
Colour chart
2807.139*170

Whiting .139 x 2-3/16 x 17" L Curbside with Cones

  • For Roadside order part # 2806.139.170
50615

Splash Proof Cover EHJ / HDC

Drawing
VWS-34-BRONZE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Bronze

  • Pan head
  • S point
7-19-1

Lock Bar Guide Only

41C5497

LiftMaster Wiring Harness Kit High Voltage

  • For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001
MP-00002-460V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
5001-8-WHITE

Residential Side & Top Weather-Strip 8' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MGH-6214-CONT-RH

Manaras 1 HP 240V 1P Jackshaft Contactor Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MX00128-A

Micanan Clutch Pad 1-1/4" bore x 5" for PRO-GOHD *** NLA

7001-18-BRONZE

Commercial Side & Top Weather-Strip 18' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-8-BRONZE

Commercial Side & Top Weather-Strip 8' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
7001-7-BRONZE

Commercial Side & Top Weather-Strip 7' Long - Bronze 7001-BZ (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
5001-12-DK-BROWN

Residential Side & Top Weather-Strip 12' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
SPECIAL-ORDR-US

Special Order Item USA

  • Ordered to customer's specs
PRO-HBH-7583U-L

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
CA-104-412

Continuous Angle 1-1/2" x 4-1/2" x 104" L Sold per Piece

MH00097

Micanan Bearing 1/2"

MOTOR280

Manaras Electric Motor TEFC 3/4 HP 600V 3PH for N4/12 Applications

  • Electric motor only- not wired
  • Continuous duty base mount 56Z
36196A

Genie Sprocket Saddle

  • Sprocket Saddle for Genie PMX Chain Drive Openers With T Rail
  • Uses # 27191A.S Sprocket ( Not Included)
MP00087

Micanan Track and #41 Chain for 7' h Door *Actual length 114"*

  • For 3/4 & 1 HP Micanan trolley operators
C-24-12-2-W

Thermal Window 24" x 12" for 2" Door White

  • For 2" thick door
2806.192.340

Whiting .192 x 2-3/16 x 34" Roadside with Cones

MU22-2WIRE-E-G

Miller Edge MU22 2-Wire End Gray - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
PRO-HBH-7553U-L

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
1EBX

Explosion Proof 1-Btn Control Nema 7 & 9 Surface Mount

  • NEMA 7 & 9
  • Explosion proof enclosure
  • One button control
  • Button: 6 amp @ 125VAC
  • Normally open
  • Metal Enclosure: H=6-1/8" W=3" D=4-3/8"
    • .......more details