Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
PD180CBT30Q

Carlo Gavazzi Photoelectric Through-Beam Receiver 30M

  • Receiver only. If emitter is required order PD180CBT30MU
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage receiver: 12-24VAC/DC
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
23-10916

LiftMaster Hoist Interlock Switch SPDT

  • Interlock switch for LM commercial door openers with hoist disconnects
  • 15A 125/250VAC
MD00382

Micanan Roller Chain #41 49 Pitch Drive with Link

  • For PRO T/TB
WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

  • Wireless access control keypad
  • Same features as WKP250LM3
  • 5 code capacity - 4-digit codes
  • 2-way design with confirmation beep
  • 900MHz
Programming Instructions
MBAT

LiftMaster Battery 7AH 12VDC

  • Single battery good for 40 cycles
  • Dual batteries recommended on gates over 16ft or 600 lbs.
E076

Rolling Steel Aluminum Bottom Bar 679 Extrusion Sold per Foot

EAST/STL-E3

Rolling Steel 3" Cast Eastern Steel Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
4J

Rolling Steel 3" Curved Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
SLT14-18

Rolling Steel 3" Flat Slat 18-ga Galvanized

UN201

LiftMaster Thermostat Controlled 500-Watt Heater & fan for MAT Gate Operators and more

  • For temperatures below 32 F
  • Designed for use with Mega Arm Tower gate operator
  • Can be used for other applications as required
  • Heater operates when termperatures are below freezing
  • Plugs into a standard 120V outlet
  • 500 Watts with a circulating fan
    • .......more details
Installation Manual
GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
.343-3-3/4-LH-C

Torsion Spring .343 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 3-3/4" Length: 12 ft
.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 3-3/4" Length: 12 ft
.273-2-5/8-LH-C

Torsion Spring .273 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2-5/8" Length: 12 ft
.250-2-5/8-LH-C

Torsion Spring .250 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .250 ID: 2-5/8" Length: 12 ft
.250-2-LH-C

Torsion Spring .250 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .250 ID: 2" Length: 12 ft
Q029

LiftMaster Limit Switch for Elite Gate Operators (K23-50099)

  • Sold individually
  • For Elite Miracle-One arm SL3000 CSW200 and robo slide and robo swing gate operators.
  • Same as part no. K23-50099
41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

  • Fits square trolley rail only
  • Same as 183A163
37301

Reversing Contactor RM12 24VAC - ** NLA

  • No longer available.
  • Possible substitution # 37407
12-10331

Flanged Bearing 3/4" x 1-1/2" x 1/8"

V1104-WHITE

Replacement Vinyl Only for 1104-White 200ft Roll

  • Sold in 200 ft rolls only
AK-21

Linear Interior Digital Keypad***to extent of inventory

  • The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
  • It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
  • Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
  • Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
  • The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.
Installation Manual
798

Fasteners Cotter Pin 3/32" x 1" 100/Bag

29-10338

LiftMaster Capacitor 70uf 230V 60Hz

  • For models: MJ5011 MH5011 HMJ5011 MT5011 and BMT5011
831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming Instructions
IPAC

LiftMaster Internet Enabled Outdoor Access Control System with VoIP Technology

  • LiftMaster® IPAC (Internet Protocol Access Control) is the first Internet-enabled outdoor access control system with Voice-over Internet Protocol (VoIP).
  • By harnessing the power of a high-speed connection IPAC’s innovative technology allows you to work smarter and more efficiently and its contemporary design features a durable enclosure which enhances your property’s image.
  • Make updates 24/7 through an IP address (no software to install) so you never have to take IPAC offline.
  • Manage resident info from any browser on your LAN so you do not physically visit the unit.
  • VOIP technology eliminates long distance fees and will be replacing old analog phone lines.
  • 50000-resident capacity so you’ll never run out of system memory.
    • .......more details
Installation ManualSell Sheet
MV-00297

Micanan Commercial Wireless Keyless Entry 372 MHz

  • Will work on Micanan commercial operators that have an on-board receiver
  • If there is no receiver then MK-00648 is required
  • Same as MV-00086
Programming instructionsInstructions de programmation
756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

  • Knurled shank
  • Max torque = 6
SSZP10-6

Solid Shaft 1" Keyed Zinc Plated 10'-6"

K2A761

LiftMaster Coaxial Cable

  • For use with 315MHz receiver
RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 75
K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

  • For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
  • Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.
37024R

Genie Rail Extension Kit for 8' Doors GBLX-8***No longer available***

  • Compatible with Quiet Lift 800 DC Belt Drive models.
  • To be used in addition to a 7' (3-piece) rail to accommodate an 8' high door.
753

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#3PT) 1000/Box

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)
HOMELINK-REPTR

LiftMaster HomeLink Repeater Kit ** same as 855LM

  • All 2006 or older vehicles require a repeater kit installation
  • In 2007 and newer if the HomeLink does not program with opener install a repeater
  • The remote supplied in the repeater kit must be kept for future programming and is NOT to be used as a garage door opener remote
Programming Instructions
41A6104

LiftMaster Cable Tension Monitor

  • Used on jackshaft model residential garage door openers
19-48047M

LiftMaster Roller Chain #48x47

  • #48 x 47 pitch with master link
  • Internal reduction chain
  • Length is 24"
G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

  • Increases one number each time current is applied
  • Connects to the 24 volts of contactor coil
  • Simple 2-wire connection
  • Same as 50-12862
7FT-BELT-LINEAR

Linear 7ft Belt Drive Rail for residential openers (HBT7C)

  • 7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
LD050

Linear 1/2 HP Deluxe Single Lamp Residential Garage Door Opener - Rails extra ***No Longer Available

  • Compatible with belt-drive or chain-drive T or I beam rails up to 10'
  • Rock solid performance
  • Diagnostic system indicates six possible trouble conditions
  • 100-watt courtesy light (bulb not included)
  • Built-in MegaCode format receiver
  • All operator controls and indicators on one side
    • .......more details
Installation ManualUser ManualSell SheetRemote compatibility chart
49563

Stanley Chain Drive Traveler Assembly

  • Compatible with all Stanley chain drive units from 1982-present
  • Not compatible with C-Channel models
  • Assembly includes Traveler 49564 and slider 24851
TAC1

LiftMaster Single Line Telephone Access Control with Radio

  • The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
  • Provides wired communication and secure access control at the gate or door.
  • Measurements: 6" h x 8.75" w
Installation ManualProgramming Instructions
PED42

Pedestal Post 42" Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with 6 in. center radius giving a tight professional look
  • Same as G559
75424

Marantec Universal Receiver / Remote Kit 315 MHz

  • Universal receiver kit includes one plug-in radio receiver and one M3-2312 remote control transmitter
  • Universal receiver plugs directly into the wall outlet
  • Same as part # 73870
  • Made in Germany
Installation InstructionsProgramming Instructions
20-1100C-2P

LiftMaster Electric Motor 1HP 115/230V 1P

  • Replacement motor for SL595
990LM

LiftMaster Surge Protector ** NLA

Installation ManualManuel d'Installation
11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

  • Used on slide gate operators using #50 chain.
  • Also referred to as adjuster bolts
STRUT-2-1/4-18'

Door Strut 2-1/4" Hemmed 18ft Long

  • Reinforcement bar 2-1/4"
WG-305

Devanco White Lithium Grease

  • Provides long lasting lubrication and protection against rust and corrosion
  • Ideal for metal to metal applications
  • Sprays on thick providing a long-lasting protective coating that won't run off
Material Safety Data SheetFiche Signalétique
BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

  • Code on key is #301
MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

  • Makes any garage door operator compatible with MegaCode transmitters
  • Simple plug-in design
  • Easy to install - one connection using two-conductor wire
  • Memory: storage for up to 10 MegaCode transmitters
  • Normally open contact activates for 0.5 seconds
  • Power: 110 VAC +/- 10% 60 Hz
    • .......more details
MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No cables or coiled wires
    • .......more details
Programming Instructions
975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

  • Works with Chamberlain (LiftMaster) Garage Door Openers
  • Easily connects with two wires to the photocell terminals of the opener
  • The Laser light turns on as you drive into the garage
  • Simply Adjust the light to a specific spot on the dash
Installation ManualManuel d'Installation
882LMW

LiftMaster Multi-Function Control Panel Wi-Fi

  • Push button for garage door operation
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • Lock feature designed to prevent operation of the door from portable remote controls
  • Compatible only with LiftMaster® Security+2.0™ and Wi-Fi garage door openers
  • Equivalent to Chamberlain's 41A7185
    • .......more details
Programming instructionsInstructions de programmation
.234-2-L

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
41A7562

LiftMaster Light Lens for 8360 8550 8355

  • Replacement light lens
CPS-N4

LiftMaster Nema 4 Commercial Protector System Photo-Eyes with Interface box

  • Commercial Through Beam Photo Eyes includes:
  • 50-15514 I/R Emmitter
  • 50-15515 I/R Detector
  • 77-16011 Hardware Kit N4-CPS
  • 001C4629 CPI Housing Assembly
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
    • .......more details
Installation ManualManuel d'installation
CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

  • Waterproof photoeyes.
  • for direct connect to operators with Logic boards. L3 L4 L5
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
  • These eyes will also work on the Micanan UL325 monitored operators
Installation ManualManuel d'InstallationSell Sheet
21-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Black

  • 2 strand 22 gauge tin dipped copper hook-up wire
  • Color coded White & White/black wires
K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

  • UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
  • Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
  • 315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch
Installation Manual
535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up tp 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
    • .......more details
CR2016

Maxcell/Renata 3V Lithium Button Cell

ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
398LMC*

LiftMaster Smart Control Panel - DISCONTINUED

  • LCD screen displays the time and temperature along with other short messages regarding the status of the garage door opener system
  • Locks out all remote control radio signals while you are away
  • Motion detecting capability that automatically turns on the light when it detects movement
  • Compatiable with all 315 Mhz LiftMaster / Chamberlain garage door openers with Security+ radio
  • Discontinued 12/31/13 - Replacement options 78LMC or 889LM
Installation manualManuel d'installation
825LM

LiftMaster Remote Light Control Sec+ 2.0 ** To Extent of Inventory

  • Operate any lamp with your garage door opener remote control.
  • Operate from your computer or smartphone by using the Liftmaster Internet Gateway.
  • Compatible only with Security+2.0 garage door openers and MyQ technology accessories.
Programming InstructionsInstructions de programmation
71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

  • Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
  • Works on LiftMaster trolley garage door openers
Instruction Manual
71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual
K79-15016-1

LiftMaster RPM Sensor Assembly L2 L3 L4 L5

  • RPM sensor for Liftmaster Logic Control L2 L3 L4 & L5 Commercial operators
30B532

LiftMaster Capacitor 53uF-64uF 220V

  • For 1/2 HP models
  • Dimensions: 1-5/16" diameter x 4-3/16" long (including the terminals)
41A5483C

LiftMaster Circuit Board Assembly *** To extent of Inventory

  • Assembly includes: Circuit board end panel and light socket
  • For chain drive units with two lights
  • Fits 2265 2565 7420 PD610 PV612C & PD612K
  • Last letter of the part # indicates revision date
  • Also known as 41A5483 41A5483B
T-53-S

FL-Allstar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

  • This remote can control (open-close-stop) up to 27 doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 535T (190-107475)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8"
Programming Instructions
T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

  • This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833TC (190-109023)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
CAM011

Manaras Limit Cam

  • Limit cam for Mountshaft018A 018B
  • 2 cam's required per shaft
19-48HL

Half Link #48

  • Half link for #48 chain (#410)
41A5021-I

LiftMaster Electronic Circuit Board Assembly ** Discontinued. No Stock Left

  • Assembly includes: Logic board end panel and light socket
  • For chain drive models with 2-lights
  • Fits 1265 Security + 390MHz
  • Also known as; 41A5021 41A5021-B 41A5021-C 41A5021-D 41A5021-E 41A5021-F 41A5021-G 41A5021-H
.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.319_5-1/4"-RH

Torsion Spring .319 x 5-1/4" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.243_2-5/8"-RH

Torsion Spring .243 x 2-5/8" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
13-10024

LiftMaster Limit Nut

  • Limit nut / cam for commercial door and gate operators
RA-LYNX-RCVR

Lynx External Receiver

  • Add to most operator systems
  • Use with either residential or commercial applications
  • Unlimited transmitter capacity
Programming instructionsCompatibility chart
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT003
  • 2x SPDT - Unimax
  • Same as Doorlec # 21702
Limit Switch Chart
RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
  • Includes a commercial receiver antenna for increased range.
  • Will be replaced by RADIO-RE901A
    • .......more details
Installation Instructions
109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 4 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 512 per channel (set by dip switches)
    • .......more details
Programming Instructions
8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz *** To Extent of Inventory

  • Open/Close remote for 3 doors
  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 6561 (set by trinary dip switches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

  • Open/Close remote for 9 doors
  • Compatible Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door trio to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

  • Open/Close/Stop remote for 9 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by 8 dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
HAE00004

Linear Limit Switch Assembly

  • For LSO LDO LCO
HAE00048

Linear Helical Gear with Grease

  • Includes roll pins
  • Can be used on all Linear / Westinghouse residential operators.
  • Helical gear measures 2-7/8" diameter
HAE00040

Linear Control Logic/Receiver Board

  • Replaces HAE00039
  • Control board for LSO LDO LCO models
PRO-CUT

Pro-Cut Angle Cutter

  • Performs accurately up tp 2x2 angle.
  • Capacity is 12 gauge steel.
  • Weight is 18.5 lbs.
24-HWB-PAIR

Winding Bars Hex 24" Set of 2

  • Cold rolled hardened steel.
  • Hex shape keeps the bar from rolling away.
  • Machined to 1/2" at one end with a 5/8" outside dia. on the other end
  • Sold as a pair.
24-RWB-PAIR

Winding Bars Round 24" Set of 2

  • Cold rolled hardened steel.
  • Machined to 1/2" at one end with 5/8" outside dia. on the other.
  • Sold as a pair.
18-HWB-PAIR

Winding Bars Hex 18" Set of 2

  • Cold rolled hardened steel.
  • Hex shape keeps the bar from rolling away.
  • Machined to 7/16" at one end with a 1/2" outside dia. on the other end
  • Sold as a pair.
25-42-80

Extension Spring 7' Door - 80 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 80 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet