Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Garage Door Commercial Door & Gate Operator Accessories Miller Edge
MLC-K72

Miller Edge Light Curtain Monitored 6ft Pulsed

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing not recommended for carwash applications
  • Operating temperature: -40F to 140F
    • .......more details
Installation manualSell sheet
ME123-CA3

Miller Edge L-Shaped Aluminum Mounting Channel Sold by the Foot

ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
RB-P-K10C

Miller Edge RBand Monitored Wireless Door Edge System

  • RBand is a monitored sensing edge transmitter/receiver system.
  • The receiver can be paired with up to three transmitters.
  • On board diagnosticsallows for easy set up and troubleshooting.
  • Offers pulsed and normally open outputs.
  • Ideal for commercial door operators manufactured after 2010.
  • Bi-directional link improves immunity to RF interference.
    • .......more details
MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

  • Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
  • Output: N.O. N.C
  • Wire connections: Integral 18” wiring with #6 spade lugs
  • Antenna: Attached wire or F connector
  • LED Indicators: Power channel 1
  • Polycarbonate enclosure
    • .......more details
ME123-2M-BLK-RH

Miller Edge Black RH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
MT22-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
ME116-BLK-LH

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide-in edge for sectional doors.
  • With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
  • ME116 is resistant to flame water and most common greases and oils
  • Soft ends
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
    • .......more details
MT22-MON-Y-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

  • AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
  • There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
  • The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
  • Battery is included # CR2032
Installation ManualSell Sheet
MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

  • For 2-wire edges
  • Was previously MWRTA02A now has a new board making installation easier
  • Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
  • This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
  • The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.
AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
  • Ambient temperature range: -49F to 180F
    • .......more details
Instructions ManualSell Sheet
AW-14

Miller Edge Air Wave Switch in ABS Box

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Molded enclosure
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
    • .......more details
Instructions ManualSell Sheet
ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
PS-20A

Miller Edge Pneumatic Air Switch in ABS Enclosure

  • Pneumatic switch offering a reliable low cost alternative to a standard electric sensing adge.
  • When attached to a hose inserted into the existing weather stripping the PS-20A acts as an effective sensing edge on doors up to 18ft in length.
  • Applications: rolling doors sectional doors and mass transit.
  • Electrical configuration: 3-wire SPDT
  • Temperature range: -20F to 158F
  • Max pressure: 20 PSI
    • .......more details
Installation Manual
RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
Installation manualsell sheet