Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 1
COUPLING002

Manaras Disconnect Coupling for MJH ** No Longer Available Sold in Kit only** Use MOUNTSHAFT010 or 010A **

  • If MJH is manufactured prior to 1998 4 x PIN016 are required
  • If MJH is manufactured after 1998 2 x PIN016 are required
  • PIN016 sold separately
ME123-CA3

Miller Edge L-Shaped Aluminum Mounting Channel Sold by the Foot

IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

  • 1 ft L x 2" H x 3" W
K23-19380

LiftMaster Reset Switch for LA400

K001A6039

LiftMaster Control Board for LA400

  • Replaces P/N 127A0071C PN 127A0071F
Installation Manual
RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
IG2-K10-50

Invisi-Guard-2 Photo Eye Kit 50ft Battery Powered *** Discontinued

  • The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
  • The light beam is intended to function as a protective line guarding a potentially hazardous zone.
  • When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
  • Universal Design Works with Pre and Post 2010 Operators
  • Spans Distances up to 50 feet (model dependent)
  • Time Saving Installation
    • .......more details
Installation ManualSell Sheet
10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

  • Transmitter offering means of activation of automatic doors with extended hold feature.
  • Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
  • Operating temperature: -10 to 55C
  • Controls one 10RD433 receiver.
MX00034-460V

Micanan Brake Assembly for PRO-HHD with 460V Solenoid

  • Complete brake assembly including 460V solenoid
  • Solenoid cover is sold separately # MM00011
HBFST-BC

Keyed Control Switch with Best Cylinder

  • NEMA 1
  • TAMPERPROOF FLUSH MOUNT
  • TWO POSITION (OPEN-CLOSE) WITH STOP BUTTON
  • CENTER RETURN
  • SINGLE GANG BACK BOX
  • STAINLESS STEEL FACEPLATE
    • .......more details
1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
LC-36A

LiftMaster Light Curtain **Discontinued

  • Must be used with a primary entrapment device and be installed along the vertical plane of the door.
  • Color-coded transmitter and receiver for easy identification.
  • Provides 36 in. of effective height coverage to increase the area of protection.
  • Multiple sets of LC-36A curtains can be mounted on a door providing coverage flexibility.
  • Maximum door width of 33 ft. ensures coverage for most commercial doors.
  • Eight (8) LEDs per side and 22 cross-beams produce an invisible curtain of infrared light for maximum detection capability.
    • .......more details
Installation ManualManuel d'InstallationSell SheetConnecting the lc-36A to a Non-LiftMaster Opener
27-48-400

Extension Spring 8' Door - 400 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 400 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-240

Extension Spring 8' Door - 240 lbs Blue

  • Single - Loop
  • 27" long 48" stretch 240 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-260

Extension Spring 8' Door - 260 lbs Brown

  • Single - Loop
  • 27" long 48" stretch 260 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-320

Extension Spring 8' Door - 320 lbs Green

  • Single - Loop
  • 27" long 48" stretch 320 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-200

Extension Spring 8' Door - 200 lbs Tan - Sold Each

  • Single - Loop
  • 27" long 48" stretch 200 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G08-SS

Hinge #8 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
1224-GLASS-ONLY

Elton Sealed Glass for frame 1224-1-3/4"

  • Thermal replacement glass only
K20-1100C-2TLP

LiftMaster Electric Motor 1 HP 115/230V 1Ph TEFC Logic

K1D8052-1CC

LiftMaster Control Board for LA500DC LA400 LA412

  • 014D1270D
ME120-PC

Miller Edge Rigid PVC Mounting Channel Sold per Foot

ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualSell Sheet
ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualSell Sheet
BRAKE013A

Manaras Band Brake Assembly Kit OSH Nema 4/12

Installation Manual
MOTOR255-WIRED

Manaras Electric Motor 3/4HP 120/240V 1PH Wired

  • Electric motor comes pre-wired for a brake
  • Must specify if operator has electronic circuit board or if it is hard-wired •This item is compatible with BRAKE011
MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

  • Electric motor comes pre-wired for a brake
  • Must specify if operator is equipped with electronic circuit board or if it is hard-wired
17S

Rolling Steel 2" Flat Stamped Steel Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
MP00022

Micanan Up-Charge Track and #41 chain for 24' h Door *Actual length 318"*

  • For 3/4 HP and 1 HP operators only
MP00019

Micanan Up-Charge Track and #410 (#48) chain for 20' h Door *Actual length 270"*

  • For 1/3 HP and 1/2 HP operators only
MP00016

Micanan Up-Charge Track and #41 chain for 16' h Door *Actual length 222"*

  • For 3/4 HP and 1 HP operators only
9003-15FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 15' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
9003-9FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 9' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
SL532-ZP-COPPER

Zinc Plated Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST532COP. Stops are not zinc plated
SL316-ZP-COPPER

Zinc Plated Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST316COP. Stops are not zinc plated
SN1600341-K

LiftMaster Sentex Bypass PCB for TAC1 EL25

  • BY PASS Board for 1150051
  • Same as KSN1600341B
USVD-4X

EMX Ultra Sonic Vehicle Detector 2700-1

  • The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
  • The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
  • The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
  • Aux. relay settings for pulse on ENTRY EXIT or BOTH
  • Output delay option for 1 2 and 4 seconds
  • Operating range: 1ft. – 5ft.
    • .......more details
Installation ManualSell Sheet
6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

  • Emitter only. If receiver is required order PD180CBT30Q
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage emitter: 2 x 3.6VDC lithium batteries
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
K72-12493

LiftMaster Limit Switch Kit

  • Complete kit with limit nut retainer switch plates backup plate depress plate limit switches (3) standoffs screws and locknuts
  • For logic control MT BMT MJ MH MHS
K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

  • For models MT BMT MJ mechanical operators
  • Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring
Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

  • Works with all Torque Force Chain Hoists
H753L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
M005

Rolling Steel Groove Mouth GM6789 Fire Door

616001404

Rolling Steel 900 Series Guide Channel Sold per Foot

  • Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.
H031

Rolling Steel Slide Bolts and Holder Fire Door

E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

14FW

Rolling Steel 3" Filler Endlock for Continuous

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
14-J

Rolling Steel 3" Flat Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
4J

Rolling Steel 3" Curved Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
17JW

Rolling Steel 2" Flat Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
2JW-D064

Rolling Steel 2" Curved Cast Windlock *** NLA

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
OEB-1

Super Sneaky Operator Extension Bracket

  • Improves installation safety
  • Extends operator rail travel length. Use a 7′ rail for 7’6" – 8′ tall doors
  • Saves extra 2" of headroom required by draw bar type operators
  • Pulls door clear of opening
  • Eliminates garage door overhang
  • Greatly increased installation ease & safety
    • .......more details
7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

  • A Whiting original
70.13

Truck Door U-Bolt 1-1/4" long

  • Zinc plated finish
  • Used to attach cables to Whiting doors
2522

Whiting Thrust Washer

  • Used on Whiting balancer assemblies
SLT14-18P

Rolling Steel 3" Flat Slat 18-ga Primed

SLT-TT

Rolling Steel Thermotite Slat Foam Injected

SLT4-20P

Rolling Steel 3" Crowned Slat 20-ga Primed

SLT4-22P

Rolling Steel 3" Crowned Slat 22-ga Primed

SLT17-20

Rolling Steel 2" Flat Slat 20-ga Galvanized

SLT17-22

Rolling Steel 2" Flat Slat 22-ga Galvanized

LD-11B

EMX Base Socket 11-Pin DIN Rail Mountable Black Block Style

  • For use with D-TEK detectors
  • Special Order Only
  • Narrow profile
V7001-WHITE

Replacement Vinyl Only for 7001-White 200ft Roll

  • Sold in 200 ft rolls only
12-10715

LiftMaster Flanged Bearing 1" Keyed

21-35077

LiftMaster Transformer 575V 24V 40VA

  • 575V PRIMARY 24V SECONDARY 40VA
  • Same as K21-35077
342.115

Whiting Intermediate Panel Tongue & Groove 11-1/2" x 96" Price on Request

  • Standard size panel primer only
342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

  • Standard size panel primer only
UN201

LiftMaster Thermostat Controlled 500-Watt Heater & fan for MAT Gate Operators and more

  • For temperatures below 32 F
  • Designed for use with Mega Arm Tower gate operator
  • Can be used for other applications as required
  • Heater operates when termperatures are below freezing
  • Plugs into a standard 120V outlet
  • 500 Watts with a circulating fan
    • .......more details
Installation Manual
GH155-L5

LiftMaster Gearhead with Brake 1-1/2 HP 575V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
GH153-L5

LiftMaster Gearhead with Brake 1-1/2 HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
GH755-L5

LiftMaster Gearhead with Brake 3/4HP 575V 3P L5 ***NLA

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
GH753-L5

LiftMaster Gearhead with Brake 3/4HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
PL-B11-ARM-STR

Lynx Straight Arm for Proline Operator

  • Used on Proline residential garage door openers
50445

Doorlec Mushroom Push-Button Red with 2 Contacts

  • Capable of opening two doors or gates simultaneously
  • NEMA 4 Enclosure
SL316COP

Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST316COP
ST18COP

Copper Stop 1/8" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL18COP
M-VERSION

Manaras Monitored Entrapment Protection Option Upgrade Mont Thru-Beam + N1 Eyes

  • Upgrades added when purchasing a commercial operator
RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
RN0024-SS

Roller 2" White Nylon 4-1/2" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
  • UHMW tire
RBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
029C98200

W-Style Complete Replacement Door White Stainless Steel Package 029C98200

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • 98" w x 100" h
  • Price varies according to size
PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
K94-36591

LiftMaster Junction Box with Cable for LA500

  • Compatible with LiftMaster LA400 LA500 swing gate operators
  • Waterproof junction housing
  • Includes 40 ft. of insulated cable
  • Includes mounting hardware wing-nut/flange wall anchors
70.32

Whiting Stainless Steel U-Bolt 1-1/4"

  • Sold per U-bolt
MK00650

Micanan UPCHARGE for N-4 Photocells in Lieu of Nema-1 Reduction for N1 Included. **Obsolete Repl by MK00697

  • In lieu on the standard Nema-1 photocells supplied with the operator
Installation Manual
PRO-GH-7553U-LH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
MK-00699

Micanan Weatherproof Thru-Beam Photocell 0-45 ft Range

  • This item has been discontinued by the supplier
Q029

LiftMaster Limit Switch for Elite Gate Operators (K23-50099)

  • Sold individually
  • For Elite Miracle-One arm SL3000 CSW200 and robo slide and robo swing gate operators.
  • Same as part no. K23-50099
CH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
Q300

LiftMaster Traveler Carriage for Miracle-One**Discontinued

  • Replacement traveler carriage for Liftmaster Elite Miracle-1 model
  • Same as part no. K75-50341
Q311

LiftMaster Surge Protection for Master / Second *** No Longer Available

  • For the Miracle-One two arm gate operator - master/ slave
  • Same as part no. K74-50329
G5MC-B

Skylink 1-Button Universal Keychain Remote with Bracket Black ***Discontinued

  • Operates most national brand garage door openers up to 2010 (see compatibility chart).
  • Small enough for carrying in a pocket or purse.
  • Fits in any new car remote housing compartment.
  • Ideal for convertibles motorcycles and bicycles.
  • Operating range of 100 feet and more.
  • 12-volt alkaline battery included.
    • .......more details
Programming InstructionsCompatibility Chart
.331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

  • Two sets of screws are required for each bracket installed
IRB-SP

EMX Industries Liquid Tight Strain Relief Connectors Sold as a Pair

BK314

Jamb bracket J-14 #14 12 gauge

  • Sold by the piece
  • Height 5.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK311

Jamb bracket J-11 #11 12 gauge

  • Sold by the piece
  • Height 4.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK309

Jamb bracket J-09 #9 12 gauge

  • Sold by the piece
  • Height 4.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK304

Jamb bracket J-04 #4 12 gauge

  • Sold by the piece
  • Height 3.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.