Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

2200-030

Linear Limit Nut

Used on various Linear Gate operators

801-300-001-01

Equinoxe Long Range Receiver 1-Door 433 MHz New Generation

1000 ft range
2016 +
This receiver will accept 8 equinoxe O/C/S remotes

Programming Instructions Instructions de programmation

SHAFT017

Manaras Spacer for Trolley Tracks

T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

CLUTCHPAD008

Manaras Clutch Pad 1" ID 4" OD

Replaces CLUTCHPAD002

41A5615

LiftMaster Chain Spreader

For models 2575 3575 3275 PD752 PD758 and others

18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

Gearbox for GH operator

LA500HDTKITSTD

LiftMaster Torroid Transformer Kit

Powers gate from AC power-120V or 220V single phase.
Ideal for applications that prefer AC transformer run operator vs. battery run operator
Ideal for areas that experience temperatures below -4 F for extended periods

GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

Includes CPS-U photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

MH00015

Pillow Block Bearing 1" UCFL 205-16

831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming Instructions

MK-00719

Micanan Replacement Antenna for On-Board & External Receiver

Approx. 8" long

7001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

CBS-338

Center Bearing Support 3-3/8" 8-gauge with Bearing Sold per Piece

Heavier gauge allows for use in both 2" commercial or 3" industrial applications
Sold per piece
For 1" shaft
Double clipped ends

K72-10047

LiftMaster Limit Shaft Kit T APT SD & GH 1/2 HP - 2 HP models L5

For models T APT SD & GH 1/2 HP - 2 HP models L5

DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 312 MHz

.......more details

Programming Instructions

MOTOR254-WIRED

Manaras Electric Motor 1/2HP 120/240V 1PH Wired

Continuous-duty base mount 60Hz
This item is compatible with BRAKE011

348.000

Whiting Tongue & Groove Bottom Panel Assembly with #77 Lock Made to Order. **Quote Only

15-1/2" x 96" standard size panel.
Extra wide panels will carry an additional charge
Primer only

165-B

Fusible Link For Loads 1 to 10 lbs

Length is 1.4328" width is .563"
Distance between center is .938"
Priced per each
Fire rated at 165 degrees Fahrenheit

MOFR-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Receiver

Maximum sensing range is 20 meters
11-Pin
8 inch optical beam angle.
Waterproof for harsh environments i.e. water dust steam etc.
To be used with amplifier series S142
Supplied with 15 m of shielded cable.

.......more details

Installation Manual

PULLEY014

Manaras Motor Pulley Standard 2" x 5/8" 5L/B

MV-00023

Micanan 1-Door O/C/S Transmitter CT-1 313 MHz

Programming Instructions

21-10298

Transformer 100VA

Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
Fused at 5A

28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
Holes drilled to allow for faster plug weld installation to frame
For use with 1" rollers

1005-1-3/4-10

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instructions Manual Sell Sheet

10FT-TROLLEY-SET

LiftMaster 10' Track Set for Trolley Operator 10-5810-P (2 pcs) *Actual length 155"*

Actual Length 12' 11"
Includes 2 pieces of 10-5810-P

.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

41DJ002

LiftMaster Circuit Board with Plate for 8500

Board: Security+ 2.0 for DC Jackshaft Model 8500
5 year warranty

20-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Red

2 strand 22 gauge tin-dipped copper hook-up wire
Color coded White & White/Red wires

ME112-R

Miller Edge Black 2W Non Monitored RH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

.262_2"-LH

Torsion Spring .262 x 2" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 2"
Length: 12 ft

71-B575

LiftMaster Interior Mount Brake Assembly 575V

Instruction Manual

41A5483-4C

LiftMaster Circuit Board Assembly *** To Extent of Inventory

Assembly includes: circuit board end panel and light socket
For belt drive units
Fits 2280 2580 WD822K(s) WD922K WD912K(S)
Also known as 41A5483-4 41A5483-4B

41B5424

LiftMaster Belt Idler Pulley and Bracket (Built Years 2000+)

This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers that utilize a T-rail
Fits models: 2500 2580 3280 3850 3500

19-50HL

Half (Offset) Link #50

Half link for #50 chain
ANSI Standard Carbon Steel

.312_6"-RH

Torsion Spring .312 x 6" x 12ft RH Yellow

Wire size: .312
Inside diameter: 6"
Length: 12 ft

.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

19-50ML

Master Link #50

For #50 chain
ANSI Standard Carbon Steel

11801

Doorlec Oilite Cam

Fits 5/8" shaft fine thread.
Grooved 5/8" - 24 x 3/8"
Requires 2 per cam shaft

HAE00033

Linear 8ft Belt & Inner Slide Assembly (HBT8)

300BL

3" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1705

4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

7001-8-BROWN

Commercial Side & Top Weather-Strip 8' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-8FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 8' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

24-HWB-PAIR

Winding Bars Hex 24" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 1/2" at one end with a 5/8" outside dia. on the other end
Sold as a pair.

25-42-180

Extension Spring 7' Door - 180 lbs Gold

Double - Loop
25" long 42" stretch 180 lb load
Sold individually
Rated for 10000 cycles
Same as part number 118

Spec Sheet

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

Allows for easy door operation.
Seal protects cargo area from dirt and moisture
Will not bunch up as bottom panel goes around top curve.
Co-extruded using rigid PVC backing with flexible PVC seal against the door.
For use with right angle vertical track
Fits only right angle vertical track assembly.

.......more details

25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

Steel construction Plain finish
Contoured for proper lock engagement
Cross Reference: W #2804

SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

CB5320500

Cable 5/32" 7x19 500' Galvanized

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs

Comparison charts

4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

Stainless Steel Shaft no bearing design
Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
Rated for 200 000 cycles
Pound Load: 145 lbs

OES-SD16

LiftMaster Optical Edge System 16ft

Sectional door edge kit 16ft (4.9M)

Installation Manual Manuel d'Installation Sell Sheet

RADIO-22

Manaras MT3-1000 3-btn transmitter 313 MHz

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
To extent of inventory replaced by RADIO-EM903

Programming Instructions

H11G07

Hinge #7 x 11 gauge

11 gauge # 7 hinge - 0.83 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H14G04

Hinge #4 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#4 position
Use between sections 4 and 5
Same as part number 244

.......more details

50195

Doorlec Front Idler Assembly with Shaft 41B9 Oilite Trolley Models

Fits all Doorlec commercial trolley operators
Same as # 50190

MA013

LiftMaster Shear Pin #6 (Standard)

For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear

ME112-E

Miller Edge Black 2W Non Monitored End Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

MX00002-110V

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Outside - Old Style

Replaces MX00140-110V

778

Fasteners Hex Head Bolt Gr 5 5/16-18 x 1"1000/Box

5/16" bolt has 1/2" head
Max torque = 12
Full thread
Grade 5

H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

.262-258-R-C

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-GH-5053-PANL

Micanan 1/2HP 575V 3P Gearhead Operator N Controls *** Price by Quote Only

Special Order by Quote only

TCG-2

LiftMaster Tri-Code Commercial Receiver ** DISCONTINUED

Two channel commercial receiver compatible with Linear Delta Multi-Code and Stanley radios.
Six 3' wired leads

Installation Manual

15-48B18LGE

LiftMaster Sprocket 48B18 1"x 1/4"

Also known as: 15-9004 1548B18LGE 159004

20111

Doorlec Cam Retainer Plate Springs *** Replaced by 26117

Works on GH/GHX

RXTA-100

Pulse 2-Channel Receiver

Two-Channel Receiver: Can be programmed to operate one or two doors or for Open/Close or Open/Stop functions.
Universally Adaptable: Works with most available brands/models of transmitters (300-390MHz) including those with rolling code.
9-30Vac/dc input.
FCC approved.

CAPXLV2MC

LiftMaster Smart Video Intercom - L

Designed for High-Rise Buildings and Gated Communities
For 50 to 50000 units multi-family buildings and garden style communities.
Perfect for any entrance and beyond with 4 Wiegand Input 4 OSDP Readers and 8 Relay Output to control doors gates or any other relay-controlled electrical system.
10” HD touchscreen display fits in a surface flush or pedestal mount.
Wi-Fi** or ethernet for easier installation and connection to Cloud. 3rd party cellular modem can be used as well.
Wireless link to LiftMaster gate operators to eliminate the need for digging trenches at the gate.

.......more details

SOLARKPB

Erone Keypad and Multi-Technology Proximity Reader (125kHz)

The SOLARKPB is a black proximity card reader and keypad geared with a high performance read range
This device is equipped with Wiegand technology and gives visual feedback through its multi-colored LED’s.
Sealed in epoxy this multi-technology reader is compatible with most popular 26-bits Wiegand card encoding

BGARMFOAM

TECHNA Barrier Gate Arm Foam Insert

esigned for use with the TECHNA Barrier arm this 14' roll of extruded foam offers additional protection reducing the chance of vehicle scratches •IP68 rated waterproof LED lights •Operating temperature: - 13F to 140F ( -25C - +60 C) •Weight ~2lbs

114-0328

RW Track Bracket #31

18 x 31

38000063

Tork Winch Electric Motor 1HP 115V 1Ph

Replacement electric motor for TW 1200

CP-LEV-BRAKE

Lynx Brake Lever

CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

12118

Doorlec Commercial Aluminum Sliding Carriage

Works on Doorlec trolley operators

BL229-L-SPP-5M

Automatic Systems Round Arm Left Sol 1 16'5" (5m)

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
C/W BL229 Left Sol1 Round Arm 16'5 Safety Edge Red Arm Lights (2 sets of lights)

12-10883

LiftMaster Nylon Bearing Kit Low Friction 1/2"ID x 1"OD

1/2" ID x 1" x 1" OD
Same as K12-10883 1210883

461-0002-08

Richard-Wilcox #31 Square Track 8ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75 x14g but additional brackets are required for doors 400lbs-550lbs at a spacing of 1.5ft. Under 400lbs spacing is every 2ft

BMT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator with Solenoid Brake

1/2 HP 120 volt 1 phase medium-duty logic trolley operator with brake
Medium-duty logic board with integral 315 MHz radio receiver
CPSU commercial photoeyes included
4L V-Belt #48 drive chain adjustable friction clutch
Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
2 year warranty

.......more details

HTUS-DOUBLE

Stainless Steel Garage Door Top Roller Bracket 12-Gauge 2- Slot

Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
Universal Design
Adjustable from 2"-3-1/2"
2- Slot
Fits Most Overhead Sectional Doors
Priced Per Each

.......more details

19-40010-SS

LiftMaster Roller Chain #40 Stainless Steel 10ft/pk

10ft length

RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details