Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SPRING040

Manaras Disconnect Spring

112561

Allstar MVP-RE 24V 8 Wire Receiver 288 MHz *** NLA

Three channels – three relay outputs
8-wire operator connection
Wire whip antenna with “F” connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683
RF frequency: 288 MHz
Dimensions: 6.625" W x 3.625" H x 1.375" D
Same as: 190-112561

GAL.262-258-144L

delete

10-10191-GR

LiftMaster Brake Disc

For various Liftmaster commercial slide door operators
Also known as: 10-10191-GR 10-10191-GR 1010191 G105209 10-10191 105209

VMD202-R

EMX Remote Tuning and Adjustment Control Device

If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
The VMD202-R may then be removed or left in place as desired.

LZE500

Erone L & Z-Bracket for Maglock ESM500

ESM500

Erone 1200lbs Exterior Maglock Surface Mount Stainless

Exterior applications & High-traffic areas
Power requirements: 12/24VDC
Current Draw: 500mA @ 12VDC 250mA @ 24VDC
Monitoring sensor
Visual feedback (red & green)
Optional L/Z bracket sold separately: LZE500

.......more details

Installation manual

RBH505L5-RH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Right Hand ***NLA

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

NICE-OVIEW

NICE Oview Display Programmer

�
Type: control programming and diagnostics unit for devices equipped with BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands modification or parameters and monitoring of diagnostic data
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Operating temperature: from –20°C to +55°C • Dimensions (mm): 107 x 61 x h 20 (with wall-mounting support: 125 x 70 x h 32)

.......more details

ACP00942

Linear Control Board for Telephone Entry System AE-100

Board only for AE-100 telephone entry system

7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

Bar assembly comes with:
(1)XBA15 -- 3M BAR
(1)XBA14 -- 4M BAR
(1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
(2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
(2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS

.......more details

CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

.192-2-L

Cut-to-Length Torsion Spring .192 x 2" Left Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

K10-10166

LiftMaster Clutch Plate

Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230

2807.162.180

Whiting .162 x 2-3/16 x 18" Curbside with Cones

P-75

End Plug for 3/4" ID Rubber Hose

Sold per plug

P-75H

End Plug for 3/4" ID Rubber Air Hose w/ Center Hole Qty 1

Sold per plug

218-45-10

PVC Connector for 3/4" - 3/32" RAH

30005

Doorlec Brake Solenoid 208V with wire leads

SELECTOR-8L5

Devanco replacement rotating 8 position switch selector for 8L5-OCS

replacement rotating encoded 8 position selector for 8L5-OCS

XBA13

NICE Rubber Impact Red Protection Strip 9M/Pkg

WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

WPS-1H-110V

Wall Pull Switch with 110V Heater

Wall Pull Switch Nema 4 Momentary Contact
Made of Aluminum DieCast
Equipped with a bronze sleeve bearing which provides smooth pull down actuation.
Cast Aluminum rotating cam allows for 360 degrees rotation and pivots downward 30 degrees off vertical from any direction.
Designed for industrial doors and fast moving lift truck operators.
Two 3/8" plugged holes on top for ceiling mount ( remove plugs for ceiling mount)

.......more details

FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz *** Discontinued

Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
Contains 10 DIP switches inside for coding.
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

JA383

FAAC Sprint 383 Board 115V

12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

Fits model ETBHW/ETHW

VS-GSLG-723

Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH

Up to 24" per second gate speed
Max gate length: 100 ft
Max gate weight: 4000 lbs
Integral APeX Controller
Soft start/soft stop
Programmable speed control

.......more details

Installation manual Spec sheet

SF175-S

Spring Fitting 1-3/4" Stationary Side Only 1" shaft

MK01428

Micanan Digital Countdown Timer

DC-Digital

LV-24-TL-RG

Narrow Lights for Loading Docks Red / Green LED 12-24VAC/DC 24-3/8" long Sold Individually

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
24 LEDs per guide light (12 Red 12 Green)

.......more details

50442

Doorlec Mushroom Push-Button Red for 1-Door

Capable of opening one door
NEMA 4 Enclosure
non-lockable

DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

Fraba DW3S-300 air switch 10008797-2
Normally Open Contact (NOC)
Screw Type Connector
Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
Housing: ABS Switch: PA6V0 Nema4
Normally Closed Contact achieved by adjusting the sensitivity screw

.......more details

Operating Instructions

GATE-SP-ORDER

Special Order Gate

Made to customers specific requirements

CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

41A3011

LiftMaster Pulley Only for Cable Pulley Bracket

Also known as: 144A12 144B16

K72-12591

LiftMaster Clutch Shaft Kit HMJ

USVD-BD

EMX Board Only for Ultra Sonic Vehicle Detector

Replacement board only for USVD-4X

HW0427-LH

SteelCraft Commercial Bottom Bracket Left Hand Only

Left Hand bracket only
Can be used for both 2" and 3" tracks
To be used on door tracks that are installed wide enough to accomodate the side cable pulley
Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
Adjustable cable can level door from the ground
Heavy gauge steel construction

.......more details

50200

Doorlec Front Idler for ETB-3 with 410B9 -5/8" Sprocket

GATE_RN3.5

Nylon Gate Roller for Cantilever Gate

3055

End Stile Keyed L-Handle With Locking Cylinder and 7-1/2" Latch Mechanism

CP-PU-DRV-58-8

Lynx Drive Pulley 5/8" x 8" 4L MR TC3 Open/Spoke Style for Trolley Ops

MH00027

Micanan Collar 1/2" ID

SS-STRUT-10

Strut Stainless Steel 2-1/2" x 10ft 16-Ga

19-4071

LiftMaster Chain #40x71 No Master Link

#40 x 71 pitch no master link
Same as G194071
Compatible with LiftMaster Model SL595GL Slide Gate Operators.

TTC-1

Timer to Close Module 14-Pin

Works on LYNX-6000 board

DXT-25

Linear 5-Btn 8-Channel Handheld Transmitter 315 MHz *** Available to extent of inventory

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

MICANAN-H/CHAIN

Micanan Charge for Hand Chain on Doors Over 16'

Up-charge only

K72-12789

LiftMaster Hand Chain Shaft Kit GH (1/2 - 2HP)

Complete with: Bevel Gear 3/4" ID Hand Chain Guice Hand Chain Shaft Bearing 3/4" ID Nyliner Bearing Compression Spring Chain Wheel Washers Roll Pins and E-Rings

MA011

LiftMaster Magnet

Mega Arm Steel Magnet Assembly for Cam Arm

K76-34697

LiftMaster APS Encoder 24V

For use with various LiftMaster® Commercial Slide and Overhead Gate Operators

Q210

LiftMaster Gear Box Kit #70 K75-50224

For use with various LiftMaster® Commercial Swing Gate Operators manufactured after 1997

41AB150-2

LiftMaster Receiver Logic Board ** NLA

Also known as: 41AB150-2 41AB150
Receiver Logic Board 315MHz

SL595203UL

LiftMaster Dual Voltage Slide Gate Op.2 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325 ***NLA

UL 325 compliant system.
Power: 208/230/460/575 VAC. 3 Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

VPL-12

Autogate 12V Motor

EP2982-NL

Exhaust Port 4" non latching short barrel *** To Extent of Inventory

4" inside diameter 1/4" sleeve
Includes fasteners & gaskets.
Polished aluminum finish.

DW-TR-200

Fraba Wireless Air Wave Switch Transmitter Only

Includes transmitter DWTR-200 433 Mhz only
A small radio transmitter and the pneumatic switch are packaged within the DW3S-200 case does not come with copper end
Comes with battery (CR2)

Operating Instructions

41D0277-1

LiftMaster Transformer WiFi Battery Backup

For Wi-Fi Battery backup garage door openers; manufactured after 2011
Same as #204D0277-1

41D9202

LiftMaster End Panel Driver Board ** Discontinued

041D9202 is a Front End Panel with LED Light Connector/Driver Board Replacement Kit.
For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
Compatible with the WLED model

CB31605000-KOR

Cable 3/16" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized cable 3/16" 7x19 5000ft spool.
Cable break strength: 4200 lbs
A higher quality cable compared to the Chinese cable
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Stainless Steel Cable Specifications

2705.148_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 18" Long
For Roadside order part # 2704.148*180

SCLUTCHSHAFTN4

Micanan Complete Clutch Shaft Assy for PRO-HW

F520-3.15-SB

Fuse 5 x 20mm 3.15A 250V Slow Blow 5/Pkg

MD-00252

Micanan Connecting Link #50

MD-00515

Micanan Roller Chain #50 Waterproof 10' Pack

K75-50932

LiftMaster Crank Housing Kit - Hand Crank Not Incl. **DISCONTINUED

SL3000 new style hand crank pocket to store hand crank (crank sold separately)

Q025

LiftMaster Motor Pulley 2-1/2" OD 1/2" Bore (K17-50098)

Replacement motor pulley of motor output shaft for Liftmaster Elite models SL3000UL and CSW2000UL

39360R.S

Genie Optical Encoder Assembly for Belt/Chain Drive

Compatible with many of the newer Genie chain and belt drive openers.
New DC Optical Encoder Assembly for Chain and Belt Drive Garage Door Openers.
Also Compatible with Overhead Door Odyssey Series #7030 and Destiny Series #8030 Chain and Belt Drive Garage Door Openers.

SHAFT036

Manaras Limit Shaft 5/8"-18x12

PRO-SD-10011-U-LH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Left Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

SL585101UL

LiftMaster Industrial Slide Gate Op. 1 HP 115/230/208V 1 Ph Heater NOT Incl. ***NLA

SL585UL features a heavy- duty industrial lockable metal cover.
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
Manual Disconnect when unlocked allows gate to be operated manually.
Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
Automatic Solenoid Brake prevents the gate from being back driven.

.......more details

Installation Manual Manuel installation Brochure Sell sheet

CGH751L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Damp Environment Modification

PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

K75-39337

LiftMaster Trolley Nut Kit LA500

The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

Replacement instructions Instructions de remplacement

CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

Same as #2-30-1

MOTOR258

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH

2500-2393

Linear Apex I Module

Older model prior to Jan 2016

10PBJL

Jamb Push Plate SS with Handicap Logo Only

1⁄16 inch thick stainless steel for maximum durability
Concealed fasteners to minimize vandalism
Compatible with both surface and flush mount boxes
Faceplate Material 16 gauge 304 2B Stainless Steel
Backplate Material 1⁄8 inch thick Aluminum
Mounting Screws Stainless Steel 6-32 × 1 in & 8-32 × 1 in Allen Head Size: 5⁄64

.......more details

PRO-APTC-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

TRMC38E

Telco Light Curtain Bracket 4/pkg

PRO-GHC-10053U-R

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

2806.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 20" Long
Roadside
For Curbside order part # 2807.171.200

MP00129

Micanan Up-Charge Track and #41 Chain for 12' h Door PRO-APTC

For 1/2 HP Micanan trolley operator PRO-APTC

3500

Whiting Beverage Align Roller 1" Screw Type

A Whiting original

SPRAY-431

Aluminum Touch Up Spray Paint 350g Bright White / Blanc Pur #431

350g
Replaces Gentek #801

R5207

Pulley 4" Zinc Plated Steel

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race

HCT10

LiftMaster HCTDCU Rail Only for 9'6" Door

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit

COUPLER-LJ-OHD

Coupler Love-Joy for Overhead Door

SETR2641AM2K

Erone 2-Channel Mini Transmitter Black 433MHz

Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

Wireless System Chart

PRO-GH-10011U-L

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

93D341

LiftMaster Cover Only Silver for EL25

Also known as 041D0341 41D341
Replacement cover for EL25

KNX-2

Fire Access Station with Switch

Fire access station with contact on microswitch
Closes when padlock (not included) is removed

MOTOR272

Manaras Electric Motor 1/2HP 600V 3PH

Continuous-duty base mount ODP 60Hz •This item is compatible with BRAKE011

PRO-GH-7523U-L

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-X_MOD-5HP

Micanan Explosion-Proof Modification N-7/N-9 for 5HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

PRO-X_MOD-3HP

Micanan Explosion-Proof Modification N-7/N-9 for 3HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

PRO-4X_MOD_3HP

Micanan Nema 4X Modification 3HP

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
For 3HP motors