The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
Flush mount momentary-contact spring return key switch OPEN/CLOSE in TAMPER PROOF EEMAC 1 enclosure with gasketed aluminium cover.
Key removable at centre only.
Can open or close door.
Recommended applications: laboratories schools hospitals food processing plants or any other area where sanitary and high security condition are important.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Electromechanical road barrier system for control of road access.
24 Vdc gearmotor
Robust structure in steel new high strength balancing springs
guaranteed up to 1000000 opening and closing operations and elliptical
section bar with high wind-gust resistance.
Work cycle (cycles/hour): 350
Working temp. (°C Min/Max): -20 ÷ +50
Packing includes: Heater Aluminum Arm Rubber impact protection strip and sticker kit
Designed for use in security systems and remote switching functions.
Typical applications for the receiver include adding a wireless zone a panic button or creating a remote arm/disarm feature for a hardwired alarm panel
Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Electromechanical small profile edge for rolling steel foor applicaton.
•Touch sensitive signaling allows for immediate stopping or reversing of motion.
•The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip.
•Lead wire: 22 gauge universal
•Sensitivity: nominal 6-8 PSI
•2 wire NO configuration
•Horizontal mount
•ANSI/UL325 recognized component
•One year warranty
Electromechanical slide-in edge for sectional doors.
With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
ME116 is resistant to flame water and most common greases and oils
A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
This prevents the dock leveler ramp from being damaged.