Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Miller Edge
MK-00648

Micanan 1-Channel 24V Receiver with Antenna

  • Comes with antenna MK00719
  • Total of 20 regular remotes can be programmed or 200 of the block coded remotes MK-00660
Programming Instructions
CPE

Erone Proximity Card Standard *** To Extent of Inventory

  • Hexadecimal number printed on each badge
  • 8mm thick
7001-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
761

Fasteners Flat Head Carriage Bolt 1/4-20 x 1-7/8" 1000/Box

  • Full length thread
  • Max torque = 6
796

Fasteners Keps Nut 1/4-20 1000/Box

  • Lockwasher & nut combination
784

Fasteners Serrated Flange Nut 1/4-20 1000/Box

  • Serrated flange face to provide locking
BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

  • For residential applications. Use CBS-338 for commercial / industrial applications
  • Zinc plated 11-guage steel
  • 1" bore bearing installed
  • Single clipped end
SSZP8-6

Solid Shaft 1" Keyed Zinc Plated 8'-6" (102")

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

  • Chain pack only
22-575

Brake Solenoid 575V

  • Same as Solenoid004
  • Fits on all 575V garage door or gate operator brake system.
GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

  • Thermoplastic resin weatherseal co-extruded.
  • For Commercial / Residential applications
  • Screws directly to the top of door no retainer required
T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
AIRSWITCH007

Manaras Exterior Adjustable Air Switch SPDT

  • To be used with metal case part # AIRSWITCH008
RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

  • Replacement reflector for the CPS-RPEN4 photo-eyes
19-48047M

LiftMaster Roller Chain #48x47

  • #48 x 47 pitch with master link
  • Internal reduction chain
  • Length is 24"
65-7WIRE-L

LiftMaster 7 Conductor Control Wire 500ft

  • 20 AWG
  • Ideal for wiring CPS-RPEN4 photocells
SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

  • Red and Green LED traffic light
  • Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
  • 24 volt DC input voltage only
  • Long lasting low power consumption
  • A simple reliable and cost-effective way to reduce accidents around the loading dock.
  • Available in two colors: safety yellow or black.
    • .......more details
Installation InstructionsInstructions d'installationWiring DiagramSchéma de connexion
8FT-CHAIN-LDO

Linear 8ft Chain Rail for LD050/LS050/LDCO (HCT8C)

  • 8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
24851

Stanley Traveler Carrier Kit

  • Works with all Stanley chain drive units from 1992-present
  • Same as part no. 9200014
  • Trolley slider for part no. 49563
Installation InstructionsInstructions d'installation
510.5377.00

Whiting Side Seal Option for Dry Freight Door

  • A extra option when ordering a Dry Freight door
  • When purchased alone use part number 5377.115
DF086.1

Whiting Dry Freight Door 3/4" with Track Balancer Standard Hardware and Side Seals

  • Includes side seal upgrade
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation
ARK

LiftMaster Auto Reconnect Trolley Kit

Installation Manual
4A1008

LiftMaster Master Link #48 Kit (2 sets)

  • For #48 chain
  • Kit (2 sets)
22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

  • Steel construction Zinc plated
  • Cross ref: Eberhard 4300
08-11013

LiftMaster Bevel Gear 3/4" ID

  • Fits the LiftMaster GH operator
BK100

Spring Anchor Bracket Mini USA Sold Individually

  • Adjustable residential center bracket
  • Bright zinc plated 12 gauge steel
  • Adjustable bearing plate
  • For 1-3/4" to 2-5/8" ID springs (Adjustable center line 2-3/8" to 4-1/4")
  • For use with steel or nylon bearings
  • Bearings NOT included
    • .......more details
27096A

Genie Drive Gear *** To Extent of Inventory

  • Gear for Genie Chain Glide PMX Series and PCG Series
  • 3-1/2 inch diameter nylon gear with square center hole
  • Square center hole is 7/16"
BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

  • Pusher spring 27" long with a large 3" tip. Sold as a pair
  • 11lbs of initial pushing strength per spring+ 3lbs per inch per spring
02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

  • Code on key is #301
AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
  • Ambient temperature range: -49F to 180F
    • .......more details
Instructions ManualSell Sheet
12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

  • Actual length: 179" (14' 11")
655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

MH00013

Micanan Flange Bearing 3/4" ID x 1-3/8" OD

  • Pro-H requires 3 of these bearings
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
CABLE_316SS-500

Cable 3/16" 7x19 500' Stainless Steel

Comparison charts
BEARING005

Manaras Flange Bearing ID 5/8"

  • Flange bearing for 5/8" shaft
.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
2807.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Curbside

  • Replacement torsion spring with cones for Whiting Door Serial # 138631
  • Specs: .139 x 2-3/16" x 14" Long
  • Curbside
  • For Roadside order part #2806.139*140
14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

  • I-Beam Chain Drive Rail for model 3595
41D794

LiftMaster Replacement Motor with Positioning Sensor

  • Electric motor for model 3850
Installation ManualManuel d'Installation
41A5021-9G-315

LiftMaster Circuit Board Assembly

  • Board: Security+ 315 MHz
  • Aeesmbly includes: circuit board and end panel
  • Also includes 1 Multi-Function wall ctrl panel - 2 wire
  • For ATS2113X model
  • For older ATS operators use replacement board 41A5021-1ATS
ME113-E

Miller Edge Black End Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
.468_6"-LH

Torsion Spring .468 x 6" x 12ft LH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 6"
  • Length: 12 ft
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
Programming InstructionsInstructions de programmation
29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

  • C & D relay 3-phase only
19-3025

Roller Chain #50 Nickel Plated 25ft Length

CP-SW-TD6A

Lynx Switch Light Delay

  • For the old Lynx 455 operators
.312_6"-RH

Torsion Spring .312 x 6" x 12ft RH Yellow

  • Wire size: .312
  • Inside diameter: 6"
  • Length: 12 ft
15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

  • Sprocket for #41 chain
PRO-HHD-7511U-R

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation manualSpecification sheet
MJ00013

Micanan Brake Shoe and Drum Assembly

  • Fits Micanan models: TB APTB JB HB HHD LH LJ & SD
  • Assembly includes: Both right & left brake shoe and the drum
H14GHALF

Half Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 1-5/8" wide with slotted holes
OSH-6532-ECB

Manaras Opera-SH 1/2HP 600V 3Ph with Electronic Circuit Board ** To extent of Inventory

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
RADIO-29

Manaras Commercial Receiver Antenna

  • Commercial receiver coaxil antenna
RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
Installation Instructions
298601

Linear Wireless Multi-Code Keypad 310 MHz

  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • 4-digit access code
  • Backlit keys
  • Easy access to battery
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Installation Manual
109410

Linear 2-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 per channel (set by dip switches)
    • .......more details
Programming Instructions
308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

  • 1-Channel Gate Receiver
  • High-sensitivity short-range radio receiver
  • Operates in conjunction with the 9-inch local antenna (supplied).
  • Designed for use with automatic gate operators or systems where a remote antenna is needed.
  • Same as: DNR00013P
Installation Manual
MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

  • Activates three 318 MHz MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
1209.1

Whiting Stainless Steel Truck Door Side Hinge with Roller Cover

300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1006-2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1005-2-16'

Aluminum Bottom Retainer U-Shaped 16' Long***Actual Length 16'2"***

  • For door thickness 2"
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
RCB-2560

Roller Chain Break #25 thru #60

  • Replacement tip included.
18-RWB-PAIR

Winding Bars Round 18" Set of 2

  • Cold rolled hardened steel.
  • Machined to 7/16" at one end with 1/2" outside dia. on the other.
  • Sold as a pair.
7001-8-WHITE

Commercial Side & Top Weather-Strip 8' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
32-48-180

Extension Spring 8' Door - 180 lbs Gold ** Replaced by 27-48-180

  • Double - Loop
  • 32" long 48" stretch 180 lb load
  • Springs sold individually
Spec Sheet
32-48-130

Extension Spring 8' Door - 130 lbs Yellow ** Replaced by 27-48-130

  • Double - Loop
  • 32" long 48" stretch 130 lb load
  • Springs sold individually
Spec Sheet
25-42-180

Extension Spring 7' Door - 180 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 180 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 118
Spec Sheet
25-42-80

Extension Spring 7' Door - 80 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 80 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
95-00114

Truck Door Rivet 1" Stainless Steel

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0032
27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White
27-20308

Truck Door Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2523 for #2376 balancer
27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2548
27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2547
Z9401

Coupler 1" Bore Non-Ajustable

  • Non-Adjustable Shaft Coupler Steel Zinc plated
  • 1" Bore
  • L= 4.7" 3 screws and nuts
  • Tightening torque on shaft: 20lb-ft max
Z9403

Coupler 1" Bore Adjustable Silver

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.35"
  • Painted silver
DM120

Cable Drum High Lift 120" 5750-120 Pair

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

  • 32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
  • Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Maximum Door Height: 32'-1".
  • Rated Lift per Drum: 1000 lbs.
  • Max Cable Diameter: 1/4".
    • .......more details
SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
H11G05

Hinge #5 x 11 gauge

  • 11 gauge # 5 hinge - 0.76 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G02

Hinge #2 x 11 gauge

  • 11 gauge # 2 hinge - 0.69 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
EP2979

Exhaust Port 3" with latch long barrel

  • For use on insulated door panels up to 2" thick.
  • Inside diameter: 3" Includes fasteners & gaskets.
  • Polished aluminum finish.
RS1037

Roller 3" Steel 7" stem 10 ball

  • Steel Roller Wheel diameter: 3"
  • Working length: 6.5"
  • Overall length: 7.75"
  • Box qty: 75 Box weight: 34.2 lbs (3-7-10 Steel)
R5209

Cast Iron Pulley 4"

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Cast iron pulley mounted on two pressed sealed bearings
  • 300lb load rating
6X12SC50

Devanco Loop 6' x 12' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
6X20PO50

Devanco Loop 6' x 20' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
4X10PO50

Devanco Loop 4' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
BK313

Jamb bracket J-13 #13 12 gauge

  • Sold by the piece
  • Height 5.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.