Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Q029

LiftMaster Limit Switch for Elite Gate Operators (K23-50099)

Sold individually
For Elite Miracle-One arm SL3000 CSW200 and robo slide and robo swing gate operators.
Same as part no. K23-50099

Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
Same as part no. K001A5869

41A5434-11

LiftMaster Full Belt Assembly for 7ft Door For Models 2001 and up

For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D

ULT-MVP

EMX Industries Multi-Voltage Loop Detector (ULT-MVP-U)

Combines small size with 9VDC to 240VAC input range.
Size: 73 x 38 x 78mm
ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
Ten (10) sensitivity adjustments
Four (4) frequency settings
Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence

.......more details

Operating Instructions Sell Sheet

BK302

Jamb bracket J-02 #2 12 gauge

Sold by the piece
Height 2.50" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

.319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-334-Installed

109B33

LiftMaster Trolley Belt Clip

36605A

Genie Pulley Assembly Belt Drive *** No Longer Available

Genie 36605A PULLEY
For Belt Drive Models
For Chain lift Belt Lift ReliaG 600 & 800 1022 1024 1042 2022 2024 2042
Also for Overhead Door Models Legacy 800 & Standard Drive Belt

41C5141-2

LiftMaster Trolley Assembly Belt Drive

For retail model
For belt drive

SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

Actual length is approx. 16'-1"

19-5814-NP

LiftMaster Trolley Chain Pack #48 for 14ft Door Nickel Plated

Chain pack only

SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

PPLK1-10

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 10/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details

Programming Instructions Instructions de programmation Sell Sheet Brochure

VBELT_4L355

Doorlec VBelt 4L 35.5" *** No Longer Available

Same as part number 19045

20418R

Genie Limit Switch Lead Wire Brown

Brown - Used to connect down limit to sequensor
For Screw drive models

AK-21

Linear Interior Digital Keypad ***to extent of inventory

The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.

Installation Manual

104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).

KTAG

Erone Proximity Key Tag with Key Ring

Works with the Promi500 & DGProx
Square in shape color is black

Wireless System Chart

MTAW22B-R

Miller Edge MT22 Air Wave Black Right Hand Sold by the Foot

Installation Manual Sell Sheet

CP-EB-MCJ-34115

Lynx E-Box for MCJH 3/4HP 115V 1Ph

Complete electrical box

CPE

Erone Proximity Card Standard *** To Extent of Inventory

Hexadecimal number printed on each badge
8mm thick

756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

Knurled shank
Max torque = 6

765

Fasteners Serrated Flange Nut 3/8-16 1000/Box

Serrated flange face to provide locking

774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

5/16" bolt has 1/2" head
Max torque = 12
Full thread
Grade 2/Grade 5 depending on availability

8X118

Fasteners Wood Screws 1000/Box

Ideal for residential weatherstrip

MOD081

Manaras Damp Environment Oil and Dust Tight Modification replaces N1 with Monitored N4 Eyes

For applications where dust water spray oil leaks or any other type of condensation is present.
Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well

Q400MAU

LiftMaster Relay Module

SSZP12-6

Solid Shaft 1" Keyed Zinc Plated 12'-6"

MT22-BLACK-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

RBH753L5-RH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

CH501L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

22-575

Brake Solenoid 575V

Same as Solenoid004
Fits on all 575V garage door or gate operator brake system.

7001-9-CREAM

Commercial Side & Top Weather-Strip 9' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (20)

7001-9-SANDSTNE

Commercial Side & Top Weather-Strip 9' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (20)

MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

165-B

Fusible Link For Loads 1 to 10 lbs

Length is 1.4328" width is .563"
Distance between center is .938"
Priced per each
Fire rated at 165 degrees Fahrenheit

NTE5326

Bridge Rectifier 25A 600V

Bridge Rectifier Converts AC to DC voltage
For powering DC accessories when AC transformer present
Small size with convenient mounting hole in center
Same as MCCM2506-RH

Characteristics

510.5377.00

Whiting Side Seal Option for Dry Freight Door

A extra option when ordering a Dry Freight door
When purchased alone use part number 5377.115

MU22-2WIRE-LH-Y

Miller Edge MU22 2-Wire Left Hand Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

Replaces Series II GIT-1 GIT-2 & GIT-3
Battery Instructions Visor Clip Included
Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.

Programming Instructions Instructions de programmation

42-31247

LiftMaster Terminal Block 20A 600V

3-position

K74-31243

LiftMaster Kit SVC MOV

SOLID_SHAFT_8FT

Solid Shaft 1" Keyed 8 ft Galvanized

actual length is approx. 8'-1"

MDR-2

Linear 2-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates two devices
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

K75-18364

LiftMaster Arm Assembly Kit for SW470

Complete arm kit for SW470 gate operator

15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

SHAFT034

Manaras Clutch (Input) Shaft for MJH

MJ INPUT SHAFT 5/8-24X12

PRO-TB-5011-R

Micanan 1/2HP 115V 1P Trolley Operator with Brake - Contactor

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models

AC7

Felco C7 Cable Cutter 3/16" Capacity

Tool length: 8"
Gives a clean cut without crushing thanks to the triangular cutting system.
Blades and centre bolt in high-quality hardened steel for exceptional performance.
Thumb catch designed for one-handed operation.
Pressed steel handles with non-slip grips
Maximum cutting diameter: 7mm / 0.28in

.......more details

Data sheet

41C0279

LiftMaster Light Socket for Sec+ 2.0

New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
Compatible with LiftMaster garage door openers manufactured from 1993 to present.
New "insulated" design eliminates interference from CFL bulbs therefore better remote control range

197LM

LiftMaster Wire Channel for T-Rail 5ft Replaces 27LM

Plastic channel attaches to the T-rail
Hides up to 3 pairs of wire
Each piece is 5ft long
Box quantity of 100

GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

A low temperature lithium based grease
To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth

34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

Deluxe Wall Console for Genie Intellicode Series II only
3 function console: operates door opener controls lights and security lock out switch
Compatible with Code Dodger
Same as previous part number: GPWC-2WLB

883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

Controls garage door operation and opener lights
Easy and fast programming
Compatible with Security+ 2.0 and MyQ remotes and accessories

Installation Manual Manuel d'Installation

CPS-RPEN4

LiftMaster Monitored Retro-Reflective Photo Eye with Nema 4 Enclosure for Commercial Door Applications

Installation Manual Manuel d'Installation Sell Sheet

12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

Swivel end
Nema 1
Same as Pull Cord

.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

107999.0001.S

Genie Motor Pulley for Overhead JST

G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
For Intellicode operators pre-1997 use GITR3 for best results
Operates with 315 & 390 MHz Intellicode 2 technology
Able to control up to 3 garage doors
Visor clip and battery CR2032 included
Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4

.......more details

Programming Instructions Instructions de programmation

.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

HD-15

Reflector Hood for 3" Round Reflector

Black/Charcoal

7FT-RAIL-CHAIN

LiftMaster 7' chain drive rail 1707LMC - colour code: Green

#48 chain size
Price reflects cost if purchased with an opener

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME113-E

Miller Edge Black End Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

.218_1-3/4"-LH

Torsion Spring .218 x 1-3/4" x 12ft LH Yellow/Orange

Wire size: .218
Inside diameter: 1-3/4"
Length: 12 ft

MK00066

Reversing Contactor Allen Bradley 24V coil

Allen Bradley no. 104-C16KJH22-X6
Cat. no. 100-C16*10

LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

Caulking gun for LSBLK / LSGRY

71-B240H

LiftMaster Interior Brake Kit with Cable 230-460V (Logic 3 4 and early 5 Disc and Pad Models)

Interior mount brake kit for operation with chain hoist

Instruction Manual

380LMC

LiftMaster Remote Work Light

For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
Provides 200 watts of light with adjustable light time delay
Lights are controlled by opener activation or control panel light button
Add as many lights as you wish – perfect for brightening up a dark garage or workspace

Installation Manual Manuel d'Installation Troubleshooting

41B5424

LiftMaster Belt Idler Pulley and Bracket (Built Years 2000+)

This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers that utilize a T-rail
Fits models: 2500 2580 3280 3850 3500

41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

Gear and sprocket assembly for belt drive units after 2002.
Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.

Installation Manual Manuel d'Installation

12-10029

Flanged Bearing 3/4" x 1-1/4" x 5/8"

19-50HL

Half (Offset) Link #50

Half link for #50 chain
ANSI Standard Carbon Steel

41B3869-3A

LiftMaster Trolley Kit for Belt Drive

Complete trolley assembly
Replaces 41B3869-1

.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft

.283_2-5/8"-RH

Torsion Spring .283 x 2-5/8" x 12ft RH White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft

22-240

Brake Solenoid 230-240V

Used on all brands of commercial door and gate operators
2 wire connection

MJ00013

Micanan Brake Shoe and Drum Assembly

Fits Micanan models: TB APTB JB HB HHD LH LJ & SD
Assembly includes: Both right & left brake shoe and the drum

VBELT_4L310

Lynx VBelt 4L 31" (4L310)

Fits the old Lynx 455 garage door opener

H14GHALF

Half Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 1-5/8" wide with slotted holes

S2TR2641E4

Erone 4-Channel Mini Transmitter 433MHz

Open/Close remote for 4 doors
Palm-size transmitters 83 x 48 x 16mm (3.25 x 1.9 x 0.6in)
Ergonomic stylish design rugged & durable
Light grey base with yellow buttons
Unobstructed range: 820 ft (250m)
One 12V lithium battery included

.......more details

Sell Sheet Brochure Wireless System Chart

LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

Fits old medium-duty Manaras operators such as MDJ
SPDT - Cherry

Limit Switch Chart

RADIO-22

Manaras MT3-1000 3-btn transmitter 313 MHz

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
To extent of inventory replaced by RADIO-EM903

Programming Instructions

STATION078

Manaras 3-btn Push-Button Control Station Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.

Sell sheet

2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Roadside order part # 2704.162*180

109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 4 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 512 per channel (set by dip switches)

.......more details

Programming Instructions

831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

Three channels - three relay outputs
Oil-tight JIC ABS case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

Three channels - three relay outputs
8-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions