Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

Input / clutch shaft kit for MJH models up to mid-1998
Kit includes V-belt 4L360 to fit with newer deeper pulley
For MJH built after 1999 use MOUNTSHAFT001A

Drawing

MOUNTSHAFT014

Manaras Clutch Shaft Kit for Opera-H (OPH)

Input / clutch shaft kit for Manaras Opera-H

Drawing

LIMIT018

Manaras Double Limit Switch without Lever

Double limit switch (DPDT) - Cherry
The extra contact is used to control auxiliary equipment
Applies to all current operators

Limit Switch Chart

RADIO-EM103SD

Manaras 3-btn transmitter configured as O/C/S 1 door Rolling Code 390 MHz

Open/Close/Stop remote for 1 door
Operates single door: O/C/S configuration
LED indicator CR2032 battery and visor clip included
Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

Manual

RADIO-29

Manaras Commercial Receiver Antenna

Commercial receiver coaxil antenna

RADIO-22

Manaras MT3-1000 3-btn transmitter 313 MHz

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
To extent of inventory replaced by RADIO-EM903

Programming Instructions

5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

Most common side seal for Whiting Dry Freight doors.
115 inches will fit almost every size door.

2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Roadside order part # 2704.162*180

6589

WhitingBrush Side Seal assembly for insulated doors

Fits Coldsaver and Tempguard

2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

Fits Coldsaver Roll-Up Doors
1-1/8" thick max 96" wide
Includes Lock and keeper

2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide
Includes Lock and keeper

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

Three channels - three relay outputs
8-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

Auto voltage sensing - no jumpers to set
Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

Open/Close remote for 9 doors
Compatible Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door trio to operate
Power: 9-volt battery

.......more details

Programming Instructions

639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

Open/Close/Stop remote for 9 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

535T

Allstar 3-btn 27-Door O/C/S Transmitter 107475 318 MHz ***Replaced by P-535T

Open/Close/Stop remote for 27 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

220205-02

Linear Complete Hardware Kit for LDO LSO LCO

Includes all the hardware needed to install the operator in its entirety.
Includes the rail hardware (door bracket and header bracket) and hardware for installing the safety beams.

HAE00001

Linear Wall Station

Wired wall station with light and lock features.
For LSO LDO LCO

232168

Capacitor 3/4 HP 220V 65 MFD

For LCO75 only

218014-02

Lamp Socket Assembly

For models LSO LCO LDO

15.1

Whiting Truck Door Stainless Steel Center Hinge

5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

RV-100

1" Vinyl Insert for Brush Retainer per foot

Color: Black
Fits in light brush retainers

300BH

3" Heavy Brush Insert 8ft Long

Polypropylene bristles
Same as model MS1712

300BL

3" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1705

100BL

1" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1701

138BL

1-3/8" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1702

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1009-1-3/8"

Bottom Nail-On for Wood Door Heavy Duty per foot

For 1-3/8" commercial doors.
For heavier applications than the 1009-1-3/4".
Provides a better cushion.
Color: Black

1015-1-3/4-24'

Rigid Vinyl Bottom Retainer Raised Centre 24' Long

Black - for door thickness of 1-3/4"

1006-2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/4-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1006-1-1/2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4" • DIE # ES18191

1003-2-14'

Aluminum Bottom Retainer L-Shaped 14' Long

For 2" thick doors.

1003-1-3/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

7001-16-BROWN

Commercial Side & Top Weather-Strip 16' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-8-BROWN

Commercial Side & Top Weather-Strip 8' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-10FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 10' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-14FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 14' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

For the temporary repair of a broken spring.
Wire size: .3750 - .4305

24-HWB-PAIR

Winding Bars Hex 24" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 1/2" at one end with a 5/8" outside dia. on the other end
Sold as a pair.

18-RWB-PAIR

Winding Bars Round 18" Set of 2

Cold rolled hardened steel.
Machined to 7/16" at one end with 1/2" outside dia. on the other.
Sold as a pair.

1104-10FT-SAND

Residential Side & Top PVC Weather-Strip with cap 10' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1106-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black dual fin vinyl

1106-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

Aluminum retainer with black dual fin vinyl

32-48-100

Extension Spring 8' Door - 100 lbs Tan ** Replaced by 27-48-100

Double - Loop
32" long 48" stretch 100 lb load
Springs sold individually

Spec Sheet

32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

Double - Loop
32" long 48" stretch 80 lb load
Springs sold individually

32-48-70

Extension Spring 8' Door - 70 lbs Orange ** check for availability

Double - Loop
32" long 48" stretch 70 lb load
Springs sold individually

25-42-160

Extension Spring 7' Door - 160 lbs Brown

Double - Loop
25" long 42" stretch 160 lb load
Sold individually
Rated for 10000 cycles
Same as part number 116

Spec Sheet

25-42-140

Extension Spring 7' Door - 140 lbs Blue

Double - Loop
25" long 42" stretch 140 lb load
Sold individually
Same as part number 114
Rated for 10000 cycles

Spec Sheet

25-42-100

Extension Spring 7' Door - 100 lbs Tan

Double - Loop
25" long 42" stretch 100 lb load
Sold individually
Same as part number 111
Rated for 10000 cycles

Spec Sheet

28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
For use with 1" diameter rollers

27-20500

Truck Door Bearing and Bracket Plate Assembly for Roll-Up Doors

Zinc plated finish
Bearing with 1" bore pressed in a football style flanged retainer
Factory installation assures proper bearing alignment
Cross reference: T #51038 W #4033 320000

DM11VL

Cable Drum Vertical Lift 11' 850-11 Pair

11' Vertical Lift aluminum die cast alloy.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
Rated Lift per Drum: 425 lbs.
Max. Cable Diameter: 3/16".
Mounting: 1" solid shaft with 1/4" keyway.

.......more details

27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

Black nylon drum with bearing
Cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines Left or Right drum (Left = Red)
Cross Reference: 2548

27-20305

Truck Door Balancer Bracket Center for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2525

26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

26-14321

Truck Door Bottom Panel with Seal (11" x 98") for Todco Dryfreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)

25E10271

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Stud plate for 1 stud
Cross Reference: W #1370

25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #1208 T #70161

25-10578

Truck Door Handle Keeper Only for Whiting Roll-Up Doors

Steel construction Black E-coat finish.
Keeper accomodates padlocks and trailer seals
Cross Reference: W #7515

HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

Complete cable locking system for 1-3/8" door.
System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.

Z9004

Shaft Key Bent 3" x 1/4"

3" Bent Key
Zinc Plated Steel

DM120

Cable Drum High Lift 120" 5750-120 Pair

120" High Lift aluminum die cast alloy cable drums.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
Maximum high lift: 120".
Maximum door height: 144" + High Lift.
Rated lift per drum: 500 lbs.

.......more details

SF258

Spring Fitting 2-5/8" Pair

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .3310".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
Winding bar hole 1/2"

.......more details

SF200

Spring Fitting 2" Pair

Unviversal thread for use in either LH or RH wound springs.
Pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .3065".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft
Winding bar hole 1/2"

.......more details

CBB316

Stop & Sleeve 3/16" 100 pair

Includes 100 stops and 100 oval sleeves

H11G06

Hinge #6 x 11 gauge

11 gauge #6 hinge - 0.79 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G04

Hinge #4 x 11 gauge

11 gauge # 4 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G03

Hinge #3 x 11 gauge

11 gauge # 3 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

CBA18A08

Cable Assembly 1/8" 7x7 114" Sold per Pair

Galvanized cable assembly for a 8ft door (114" = 9'-6")
Sold as a pair

CB5320500

Cable 5/32" 7x19 500' Galvanized

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs

Comparison charts

RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)

RS1037

Roller 3" Steel 7" stem 10 ball

Steel Roller Wheel diameter: 3"
Working length: 6.5"
Overall length: 7.75"
Box qty: 75 Box weight: 34.2 lbs (3-7-10 Steel)

RN1127

Roller 2" Nylon 7" stem 11 ball White

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.31" Overall Length: 7.25"
Box qty: 150 Box weight: 65.5 lbs (2-7-11 White Nylon)

R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/8"
Riveted with Ball Bearing

BK312

Jamb bracket J-12 #12 12 gauge

Sold by the piece
Height 5.0" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot accepts 5/16" track bolts

25-10250

Truck Door Bottom Fixture for Todco Roll-Up Doors

Steel construction Zinc plated finish
Cross Reference: T #69249 T #61352 W #4003 230000

25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

Unplated shaft 10 roller ball design
Shaft Length: 6.5" Overall Length: 7.5"
Long stem roller has a staked collar design versus machined collar on others.

25-10050

Truck Door Center Hinge Zinc for Todco Roll-Up Doors

Zinc plated Steel construction
Cross Reference: T #61196 T #59126 W #4012 220100

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

CUSTOM4X6PO

Devanco Loop 4'x6' rigid-pvc pave-over

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X8SC50

Devanco Loop 4' x 8' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

6X12PO50

Devanco Loop 6' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

1104-8FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 8' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

Z9210

Spring Spreader Tool

Used to spread the spring coils while repairing a broken spring

26-14522

Truck Door Intermediate Panel (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish