Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search maxum
1461-LCN

LCN Door Closer with Regular Arm and PA Bracket

  • Aluminum finish
  • Can be used for both commercial and institutional applications
  • Can be mounted on either left or right swinging doors
  • The spring power of a 1461 cylinder is field adjustable from size 1 through size 6 and is shipped adjusted to size 3.
41A5281

LiftMaster Extension Brackets for Snappy Sensors

  • Brackets used with Snappy Sensors 41A5034
  • For use with with 41A5266-1
PRO-GT-7511-U

Micanan 3/4HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

RS3346

Roller 3" Steel 3/4" Shaft 5.8" stem Heavy-Duty 6203 Bearing

  • Steel Roller Wheel diameter: 3" 5.8" Stem Overall length: 7"
  • Heavy-duty 3/4" shaft supporting higher weight load applications
D-2-8

Keyed Disconnect Device 8ft Cable

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
OSH-6114-ECB-LH

Manaras Opera-SH 1HP 120V 1Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

  • For models MT BMT MJ mechanical operators
  • Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring
24-115-1

Relay 8 terminal 115VAC DPDT

  • For most operators with contactor
  • Will work on Liftmaster MH Lynx MCJH and more
1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
4A1344

LiftMaster Light Socket Plastic (41C279)

B119

Rolling Steel Fire Door Bottom Bar Slotted Angles Sold per Foot

.283-6-R

Cut-to-Length Torsion Spring .283 x 6" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
MD-00348

Sprocket 50B26 x 1" 1/4" KW 2SS

4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

  • For door thickness 2"
PRO-HHD-7511U-R

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation manualSpecification sheet
5X10PO50

Devanco Loop 5' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
PRO-J-5083-U-RH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

5001-7-CREAM

Residential Side & Top Weather-Strip 7' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

  • Upgrade option
K41-0095-000

LiftMaster DC Motor Drive HD Gate

  • This service kit is compatible with the following models: HDSL24UL & HDSW24UL
15-41B18LGH

Sprocket 41B18T 1" Bore

  • Also known as: 155016 41B18
  • 18 Tooth Sprocket #41 Chain (41B18)
  • Includes 2 Set Screws
DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

  • Sold in increments of 5ft to a max of 25ft
10TD900HH1

BEA 1-Button Transmitter 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • Operating temperature: -10 to 55C
  • IP65
SUPPORT014

Manaras Board Snap Locking Support 7/16" ** Special Order Only

028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

  • Price by Quote Only
017-034

Blue Giant Spring Wire T/L85 Spring **Special Order

  • Price by Quote Only
27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

  • Frame size is 56C
E/1929/234

Automatic Systems Rod Lever Assembly (BL229)

  • Used on the BL229 gate op.
15-80B60YMP

Sprocket 80B60T 2.0B 2X 1/2-13"

  • Also known as: 158060
TS-1-255-GALV-KEY

Tube Shaft 1" x 255 (21'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
TS-1-183-GALV-KEY

Tube Shaft 1" x 183 (15'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
TS-1-168-GALV-KEY

Tube Shaft 1" x 168 (14'.0) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
TS-1-159-GALV-KEY

Tube Shaft 1" x 159 (13'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
TS-1-135-GALV-KEY

Tube Shaft 1" x 135 (11'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
1-0242

RW Stay Roller 68 Nylon 2-1/2" Dia

  • Special Order item
  • Reverible and adjustable for doors 1-1/2" to 3" thick
  • Steel frame Zinc plated finish
CPT210-END-KIT-U

Miller Edge Universal End Kit for CPT210

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
E/BLOP/116

Automatic Systems Anti-Corrosion Base

SPR50B42X138

Sprocket 50B42 1-3/8" KW 2SS 5/16-18

  • 42 tooth sprocket for #50 chain
RDRG63.3.1-1:1/2

Maximum Output Torque Generated Chain Hoist Rolling Door w/4B60HD-1:1/2K3/8-2S5/16SQ ** Spec Order

K94-37848-2

LiftMaster Electric Motor 1.5HP

  • Replacement motor for SL595151U •1.5HP 1PH 120/208-240VAC
36310

Doorlec Flicker Relay OFF/ON 120V AC

GALV-343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
BPPN17524

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 289" (24')

GAREX-24X12-CBRN

Garex Thermo Window Clear 24" x 12" Commercial Brown Frame

  • An original Garex window
  • Fits 1-3/4" thick door R16
H11G08-SS

Hinge #8 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G07-SS

Hinge #7 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
RB-P-K10C

Miller Edge RBand Monitored Wireless Door Edge System

  • RBand is a monitored sensing edge transmitter/receiver system.
  • The receiver can be paired with up to three transmitters.
  • On board diagnosticsallows for easy set up and troubleshooting.
  • Offers pulsed and normally open outputs.
  • Ideal for commercial door operators manufactured after 2010.
  • Bi-directional link improves immunity to RF interference.
    • .......more details
K41-0243-000

LiftMaster Output Sprocket IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators
CP-SH-34-MC3-65

Lynx Complete Limit Shaft Assembly #65 Chain

  • For trolley operator
5001-8-CREAM

Residential Side & Top Weather-Strip 8' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
IP-MON

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System

  • Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in white.
  • IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
  • Rectangular shape (available in square shape: IP-MONSQ)
  • SIP Server
  • Operating temperature: -10C to 55C
  • Call recording and built-in memory
    • .......more details
OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
110968.001

Overhead Door Limit Shaft Kit RMX

SHAKER-R16

Garex Ready to Install Door Special Order

  • Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
  • Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
  • Panel Width: Up to 24 feet (732 m)
  • Texture: Woodgrain
  • Offered in various choices of colours
MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

  • Made of sturdy ABS plastic Off White
  • Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
  • Contactless: up to 8" read range
  • Supports printable 14 mil CR80 adhesive-back PVC cards
  • Sold in lots of 25
  • Same as: 830-00420
    • .......more details
CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Solenoid brake optional **
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
GALV-273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
SPR50B54X1

Sprocket 50B54 for a 1" Shaft

GALV-331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
99119671-PER-FOOT

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T Sold per Foot

  • 1/4" T width
  • Used on Amarr Residential Open Back Doors and Classica models
2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 29" Long
  • For Roadside order part # 2806.177.290
CPT215-END-KIT-T2

Miller Edge End Kit for CPT215 10K Ohm Resistor (T2) Configuration

  • Kit contains: (2) Caps (2) cages (1) wired plug (1) 10K plug (1) non-mon. plug (2) screws
  • No glue is required
CPT-215-50

Miller Edge Field Configurable Sensing Edge 50 ft Roll

  • For do-it-yourself edges on sectional or rolling doors.
  • Black extrusion flexible PVC conductive polymer Ends: Molded polymer
  • End plugs and mounting channel sold separately.
  • Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
  • When combined with the ME123 mounting channel ideal for 2" thick surfaces
  • Lead Wire 12 in. 22 gauge SJTO
    • .......more details
T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

  • Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
  • For use with specific Torque Force chain hoists ie 200R (244687)
  • This chain will NOT work in the hoists that use the 30.7-19-5 chain
  • works with Micanan / Nice Commercial operators
K23-34822

LiftMaster Open/Close Switch

  • For use with various LiftMaster® Commercial Slide Gate Operator Control Boxes
10FALCON-EXXL100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable Mount 6.5' to 11.5'

  • FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 6.5' to 11.5' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX XL: 13’ × 6 ½’ @ 8 1⁄5’
  • Oerating termperature: -22-140F
    • .......more details
GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
041-0400-000

LiftMaster Door Shaft Collar

  • Fits with LiftMaster model #98032
CP-PU-AWNING-1

Lynx Awning Pulley 1" MCJH

19-40ML-SS

Master Link #40 Stainless Steel

  • For #40 chain
GX-200

Garex Ready to Install Door Grooved Special Order

  • Panel height 18* 21 and 24 inches (45 53 and 60 cm)
  • Panel width 1 ⅜": Up to 18 feet (548 m) 1 ¾": Up to 28 feet (853 m)
  • Door Thickness 1 ⅜" (3493 mm) / RSI 211 (R-12) 1 ¾" (4445 mm) / RSI 281 (R-16)
  • Windows 1 ⅜": Standard injected frame (1520 or 1542) 1 ¾": Standard injected frame (24x12 or 40x13)
  • Metal Thickness 26 ga Steel : 047 mm (00185 in) 23 ga Aluminum : 061 mm (0024 in)
  • Insulation: High-density polyurethane meeting the highest environmental standards
    • .......more details
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" maxum DC

  • For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
  • Chain Spreader for Maxum for 1" door shaft
BEARING048

Manaras Flange 2-Bolt Flange Bearing ID 3/4" Black

GALV-406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Galvanized Blue/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-406-6-144-R

Torsion Spring .406 x 6" x 12ft RH Galvanized Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
2806.206.380

Whiting .206 x 2-3/16 x 38" Roadside with Cones

CGH303L5-RH

LiftMaster Gearhead w/Carwash Mod. & Brake 3 HP 208/230/460V 3P L5 Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
E/1907/012

BLG76 Backup Spring Assembly

RGH-6214-MON-RH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
44-60-160

Extension Spring 10' Door - 160 lbs

  • Clipped ends
  • 44" long 60" stretch 160 lb load
OTBH-6534-M-N1

Manaras Trolley Operator 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

  • Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Pre-Wiring included for postal lock device (not included).
  • Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
  • Dimensions: 14” x 6.5” x 1.4”
31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

S3HD-2

Coaxial Splitter 2-Way Female to Female Type F

  • A practical and efficient solution for dividing a signal from a coaxial source into two separate channels
  • Its careful design helps minimize signal losses thus ensuring optimal quality on each output
  • Frequency: 5 - 3000 MHz
  • Special order item price may vary depending on availability.
K77-38121

LiftMaster Wiring Harness SL585U SL595U

  • Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators