Devanco Canada - Get The Right Garage Door Opener‎ and Parts

GAREX-SPEC-ORDR

Garex Light Commercial Door Special Order

specify size color details when ordering
Please call for pricing

5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

Pierced track

C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

Stamped bearing for lighter loads
For a heavier duty machined bearing use R5114

28020020-500

Cable Stainless 5/16" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

104083

Marantec Reference Switch for Belt and Chain Rails

This part works with the positioning tab and motor to determine the open & close limits of the actual garage door.

Q400E-HCT

LiftMaster Control Board HCT

Replaced Q400D-HCT

7220355

FAAC 400 Front Fitting

41A7920-1

LiftMaster Hardware Kit

90_9210MO

LiftMaster Auxiliary Limit Switch Mod M62 Open Factory Installed

Provides a limit switch for use by others to control auxiliary devices such as lights heaters dock levelers or other equipment.
The switch can be used to turn on or off such equipment when the door is fully opened or fully closed.
When ordering specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure.
A maximum of 2 switches per operator can be supplied.
Each switch is SPDT (form C) and is rated 10 amps at 125/250 VAC
Wire leads are provided on field install kits

.......more details

.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

Provides LED visibility on both sides to 12 ft. arm.

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

Flexible magnetic material with an embossed finish
100 piece contains ten each of numbers 0-9
Priced per box

CP-LX100

Lynx Control Board with Cover for UL325 models

For all voltages

Programming instructions

H105L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Left Hand W/Brake

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

11-10705

LiftMaster Output Shaft MH

1003-4"-PER-FT

Bottom U-Rubber 4" Black Sold per Foot

26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Primer Finish
Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.

.......more details

9150000622

5/32" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

1007-1-5/8-14

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

TC134-16

Top Cap 1-3/4" 16 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs
A higher quality cable compared to the Chinese cable
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

.295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

1104-ASFT-9FT

Elton Aluminum Stiffener for 1104 9ft

Prevents the 1104 from buckling in the hot sun

25-4003-K

LiftMaster 2.6-3.7 Amp Overload Fuse

For models: SL595-200-53

111883.0001

Overhead Logic Board for RMX

Replacement circuit board kit for the Overhead Door RMX commercial operator.
Replacement circuit board for the Overhead Door RMX commercial operator. UL 325 2010 compliant.
This circuit board replaces part #110955.0001

MAW123-BLK-U

Miller Edge Air-Wave Edge Black Sold per Foot

This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.

MH00001

Micanan Bronze T-Bushing 3/8" ID

2 required per operator

10-1000-14FT

Strip Curtain 14' x 48" Angle Mount - 8" LT PVC - 4" O.L Clear

14 ft wide x 48" high
Mounting bar sold separately

97-75005

DOT-C2 Reflective Tape 150 ft x 2" W All White

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

LA400DC

LiftMaster Primary Actuator Arm for Single Gate Applications 12VDC New Version

New version has red stripe but will still work on the old LA400

Installation Manual Manuel d'Installation Sell Sheet

27-48-260

Extension Spring 8' Door - 260 lbs Brown

Single - Loop
27" long 48" stretch 260 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G07-SS

Hinge #7 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

15-3619

LiftMaster Sprocket 50B19T 1-1/4" x 1/4" 2-SS

17S

Rolling Steel 2" Flat Stamped Steel Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

2376.177_25.860

Whiting Torsion assembly .177 wire size 25" spring length 86" shaft

14JW

Rolling Steel 3" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

17J

Rolling Steel 2" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

2KW

Rolling Steel 2" Curved Continuous Windlock *** No Longer Available

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

70.13

Truck Door U-Bolt 1-1/4" long

Zinc plated finish
Used to attach cables to Whiting doors

SLT4-18

Rolling Steel 3" Crowned Slat 18-ga Galvanized

GH151-L5

LiftMaster Gearhead with Brake 1-1/2 HP 115/230V 1P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

RN0034-SS

Roller 3" White Nylon 4-3/4" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 100000 cycles for a 12' door
Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.

.331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

MR00007

Micanan Brake Disconnect Cable 1/16" x 12"L c/w Cable Stop

2 Required per operator

K22-36900

LiftMaster Triple Phase Brake Solenoid L5

71-B575-1

LiftMaster Internal Brake Kit 575V 3PH for L5 Operators

Complete with: Brake hub kit Brake release lever Brake disc Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Conduit
Can be replaced in-field

Instruction Manual Manuel d'instructions

9150000627

1/8" Stops ONLY 100/pkg

Stops only 100 per pack

8002-7FT

Side Weatherstrip with Black Rubber Bulb for Pedestrian Door 7ft Long

Aluminum and Black Rubber
Comes in 7ft lengths

801-300-001-01

Equinoxe Long Range Receiver 1-Door 433 MHz New Generation

1000 ft range
2016 +
This receiver will accept 8 equinoxe O/C/S remotes

Programming Instructions Instructions de programmation

T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

27150A

Genie Chain Bullet

Compatible with: Genie – PMX60 PMX65 PMX80 PMX85 PMX300-IC/A & B IC250 IC250B PMX500-IC/A & IC/B ALC SERIES RCD SERIES
Overhead Door – 496 496CD (/A&B ) 696 (/A&B) 777 777CD
PASSPORT 286-386 286CD-386CD
Connects the two chain ends and also is the piece that the carriage engages

104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).

MOD021A

Manaras Safepack 24V Control Circuit

A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.

761

Fasteners Flat Head Carriage Bolt 1/4-20 x 1-7/8" 1000/Box

Full length thread
Max torque = 6

SSZP12-6

Solid Shaft 1" Keyed Zinc Plated 12'-6"

6X42PO50

Devanco Loop 6' x 42' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

Chain pack only

K75-10387

LiftMaster Slider Assembly for APT

CH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4 or CPS-RPEN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

14D1279E

Programming Instructions Instructions de programmation

71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Instruction Manual

41D216

LiftMaster End Panel with all Labels and Light Socket

End panel that goes on model 8355
For the circuit board order 45ACT

7001-12-SANDSTN

Commercial Side & Top Weather-Strip 12' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (10)

SPR41B60X1

Sprocket 41B60 for a 1" Shaft

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

Up to 100 000 individual codes
Mounts to wall or gooseneck post
Incl. 6-volt alkaline battery
Illuminated stainless steel faceplate and keypad
Tamper-resistant case and "low battery" indicator
Requires 412HMC receiver

.......more details

Installation Manual Sell Sheet

4A1008

LiftMaster Master Link #48 Kit (2 sets)

For #48 chain
Kit (2 sets)

41A1037

LiftMaster Chassis Bracket

To correct higher level of noise than normal due to vibration from the powerhead.
Fits models 1355 3255 3270 3265-267 made between Jan-March 2014.

22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

Steel construction Zinc plated
Cross ref: Eberhard 4300

BK000

Residential Top Bracket Adjustable 1-Bolt Sold per Piece

Same as part number 3-31-1
Sold per piece - not a pair

5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

1005-1-3/4-14

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

K75-18364

LiftMaster Arm Assembly Kit for SW470

Complete arm kit for SW470 gate operator

50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

.295-2-R

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-2-R

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.283-134-R

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-134-L

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.207-134-L

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

K001A5566

LiftMaster GL Replacement Board ***Discontinued. No Replacement. *** No Longer Available

Replacement Logic Board for LiftMaster Gate Operators
Fits Slide operator SL570 SL575 SL580 SL585 SL590 SL595
Fits Swing operators SW420 SW470 SW490

7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

ME113-E

Miller Edge Black End Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

372LMC*

LiftMaster 2-btn Security+ Transmitter 315 MHz ****Discontinued - Replaced by 892LT**

Both buttons feature Security+ rolling code technology
Compatible with models manufactured from 2005
Second button can learn other shared Liftmaster radio-controlled devices.
Includes visor clip and Lithium battery CR2032
Obsolete as of 9/31/2012 - Replaced by 375LM 892LT or 894LT

LSBLK

Loop Sealant Cartridge Black 29oz

Also available in grey (LSGRY)
Can be installed in sub-zero temperatures as long as the surface is clean and dry
Loop sealant gun sold separatley # LSGUN

375LMC

LiftMaster Universal 2-btn Transmitter ** USE 380UT

Dual frequency universal transmitter
Will activate 2 different types of openers (1 on each button)
Compatible with major brands except Marantec & Hormann
Visor clip and battery CR2032 included

Programming Instructions Instructions de programmation

380LMC

LiftMaster Remote Work Light

For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
Provides 200 watts of light with adjustable light time delay
Lights are controlled by opener activation or control panel light button
Add as many lights as you wish – perfect for brightening up a dark garage or workspace

Installation Manual Manuel d'Installation Troubleshooting

24-24-1

LiftMaster Relay 24VAC 8-Pin DPDT Flange

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

Commercial Open/Stop/Close receiver for one door.
If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
It is easy to set with its learn feature (no coding switch).
This receiver can accept up to 8 different operational codes.
Manufacturer's model number: 190-110554
Dimensions: 6 1/4" x 3 5/8" x 1 3/4"

.......more details

Programming Instructions