Devanco Canada - Get The Right Garage Door Opener‎ and Parts

3BLM-BC

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose and Best Cylinder

Open-Close-Stop
Dimensions: 7" h x 2-3/4" w x 3-1/2" d
Exterior surface mount

3BLM-BC

BEA-10-FALCN-XL

BEA Falcon-XL Motion Detector Mount under 11'5"

Same features as the Falcon detector but made specifically for extra low mounting
Mounting height between 6.5' and 11.5'
Detection zone: 13'x6.5' at 8 1/5'
Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor.
Sensor also has the ability to differentiate between pedstrians and vehicles.
Available remote makes it easy to make adjustments to all key parameters of the sensor while at ground level.

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

50150

Doorlec Electro-Mechanical Safety Edge and Weatherstrip Sold per Foot

For the protection of vehicles doors and safety of people.
Any upward-acting door may be fitted at the leading edge with an electro-mechanical safety weatherstrip.
This mechanism consists of a formed galvanized steel section covered with vinyl impregnated rubber hinged along the full width of the leading door edge.
Can be adjusted to approximately 2½" (63.5mm) to form a tight weather seal.
The hinge linkage is arranged that minimum pressure is required to activate the electrical control switch causing door to reverse direction of travel to the fully open position.
Reverse switch is enclosed in a galvanized housing with a sliding plunger to assure positive actuation every time.

.......more details

02-103

Push Button Station 3-btn Surface Mount Metal Housing

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

MK00643

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Field Install

Auxiliary device logic board
Controls red/green lights
Provides Normally Open dry contacts for fully open or close positions
Normally Open dry conatcs for door opening or door closing cycle
Works on circuit boards: MK00641 MK00642 MK00701
Includes installation hardware

.......more details

Instructions Manual

02-108

Push Button Station 3-btn O/C/S Flush Mount Stainless Steel Faceplate

Nema 1
Standard 2X4 electrical junction box with stainless steel faceplate
OPEN/CLOSE/STOP allows complete control of the door

LM21XPBB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting

.......more details

Installation Manual

50-HERK-RC2

Hercules Infrared Programming Remote Red (50-HERK-RC2)

Conveniently choose from 8 different preset comfort functions to adjust detection fields mounting heights relay hold interval cross traffic optimization direction recognition people/vehicle separation slow motion detection turn on/off filter functions open the door manually and much more
Bidirectional
Fine-tune the motion detector from the ground without guessing if all the settings have been received by the sensor

02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

Single Pull Switch Control
Hazardous Area Overhead Mt. (NEMA 7/9)
Die cast hazardous area enclosure
May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.

.......more details

TLS1CARD

LiftMaster Option Board for L4 L5

Works in conjunction with Logic 4 & Logic 5 to provide seven field-selectable modifications
Including six door traffic control options
A means to connect External Open & Close limits by using a selectable DIP switch
Controls both 24V & 110V traffic lights
Formally known as RDGRNCARD

Installation Manual

02-411

LiftMaster Pull Switch Assembly Nema 4

May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).

02-103L

LiftMaster Push Button Station 3-btn Surface Mount O/C/S Nema 1 with Maintenance Alert LED

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Works with Liftmaster MH commercial operator
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

.......more details

50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

Five feet long.
OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
The weight of the vehicle compresses an electric switch which sends an open signal to the door.
Requires a 2-wire connection to the operator but does not require power to function

02-401M

LiftMaster 1-Button Control Station

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series Commercial Door Operator Applications
Sends the door to the full open position. Perfect for time sensitive situations.

02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

Die-cast metal enclosure
START may be used as OPEN with all LiftMaster operators.
May be used as OPEN and CLOSE on all operators with type B2 control wiring

02-409

LiftMaster Key Switch 2-Position Nema 4/12

Two Position Key Control Station
Outdoor Surface Mt. (NEMA 4/12)
Tamperproof
Die cast metal enclosure with standard key cylinder
OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
Dimiensions: 3" x 3.2" x 4.2"

.......more details

02-409B

LiftMaster Key Switch with Best Cylinder

Two Position Key Control Station
Outdoor Surface Mt. (NEMA 4/12)
Tamperproof
Die cast metal enclosure with BEST cylinder (construction core included)
OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
Dimiensions: 3" x 3.2" x 4.2"

.......more details

23-10916

LiftMaster Hoist Interlock Switch SPDT

Interlock switch for LM commercial door openers with hoist disconnects
15A 125/250VAC

AFB120

LiftMaster Fire Access Box w/Micro Switch & Knox Key Switch Option

ll-in-one fire access box
Includes: access door with a hole for a standard or fire department padlock interior micro switch knock out for Knox key switch and standard cylinder lock
Two options for automatic gate access: 1) micro switch is activated when the padlock is removed and the front panel is opened or 2) via Knox key switch
NOTE: fire department padlock and Knox switch NOT provided

LM56A

LiftMaster Magnetic Proximity Reed Switch

Normally Open magnetic sealed reed switch; proximity switch
Used for overhead door contacts.


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login