Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
26CW94325

Truck Door Bottom Panel with Seal (15" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
02-108

Push Button Station 3-btn O/C/S Flush Mount Stainless Steel Faceplate

  • Nema 1
  • Standard 2X4 electrical junction box with stainless steel faceplate
  • OPEN/CLOSE/STOP allows complete control of the door
Q248

LiftMaster Gear Reducer 40:1 HCT Post 2/99 (K32-50251)

  • Same as K32-50251
MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

MD00045

Micanan Spur Gear 12B72-1

102079

Flange Plate PFL6Z PFL206

  • 2 required per bearing # 101475
37561R

Genie Belt and Bullet Assembly 7ft

  • For 7' Tall Doors Only
  • Fits the following models: IntelliG 1000 (3024) IntelliG 1200 (4024)
  • SilentMax 1000 (3042) SilentMax 1200 (4042)
ETM17-24V

EMX Digital Timer *** No Longer Available

  • The ETM-17 series are panel mount digital timers the can be operated in 12V dc or 24V ac/dc power supply ranges depending on model ordered.
  • The output is a form “C” relay capable of 16A@ 30VDC.
  • Internal battery for memory backup of programming in the event of power failure.
  • Designed with 17 ON/OFF events per day and 15 combinations of daily programs for the best flexibility to the user.
  • Manual or Auto mode
OPH-6532-CONT-R

Manaras Opera-H 1/2HP 600V 3Ph Contactor Model Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
Installation ManualSell Sheet
.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
MALEDCW

LiftMaster Counterweight for 17ft LED Arm

  • For use with MALED17 17 ft. LED Arm for MA/MAT
T116

Manaras Trolley Track 16ft for 3/4HP & All APT models up-charge *Actual length 222"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
N7/9-MOD

Micanan Explosion Proof Modification

  • Modification available on certains models only
RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

6X20SC50

Devanco Loop 6' x 20' Saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
UNI-100-102

Uni-Size Bottom Weather Seal 10'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
G651208R

LiftMaster Replacement Wooden Wishbone Arm 24ft White / Black Stripes. Counterweight NOT incl

  • Counterweight sold separately part # G658056
  • Replacement wishbone arm up to 24ft for BG790
25-2008

LiftMaster 8 Amp Overload Fuse

  • For models: SL585-100-21 SL858-100-81 SL595-100-21 SL595-100-81 SL575-100-21 SL575-100-81
84284

Marantec Logic Board for Non-EOS Models

  • For use on M Line- M-4500 and M-4700 models.
  • For use on Q Line - 7500 and 7700 models.
  • For use on Martin DC 3500E and DC 3700E models.
  • Replaces 8054216. Special programming needed. Instructions included
111883.0001

Overhead Logic Board for RMX

  • Replacement circuit board kit for the Overhead Door RMX commercial operator.
  • Replacement circuit board for the Overhead Door RMX commercial operator. UL 325 2010 compliant.
  • This circuit board replaces part #110955.0001
26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Co-extruded using rigid PVC backing with flexible PVC seal.
  • To be used with the offset U-channel retainer only (26-40037 or 26-40039)
MK00799

Micanan Smart 10.0 Full Feature Circuit Board Non- Monitored with H.D Relays (MK00701-NM)

  • For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
  • The board does NOT have P1 & P2 terminals
Instructions Manual
41D605-1

LiftMaster Electric Motor 80kg/100kg

  • For retail models: WD952KD HD800D and WD952LD
Replacement InstructionsInstructions de remplacement
15-3619

LiftMaster Sprocket 50B19T 1-1/4" x 1/4" 2-SS

MP00014

Micanan Up-Charge Track and #41 chain for 14' h Door *Actual length 198"*

  • For 3/4 HP and 1 HP operators only
K72-33872-1

LiftMaster Limit Switch Shaft Kit

  • For models MT BMT MJ MH and MHS logic control
  • Kit includes: limit shaft limit nuts limit bearings limit sprocket washers compression ring roll pin and e-ring
SLT14-20P

Rolling Steel 3" Flat Slat 20-ga Primed

GH153-L5

LiftMaster Gearhead with Brake 1-1/2 HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
.192-2-RH-C

Torsion Spring 192 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .192 ID: 2" Length: 12 ft
RN0039-SS

Roller 3" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles of a 12' door
  • Stem Length - 8.312" Overall Length - 9.25"
RBH755L5-LH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 ***NLA

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
MW-00021

Micanan Splash Proof Cover Fully Assembled

  • Splash proof cover for models: PRO-H J HHD GH and GHC
  • Same as MP-00204
41A5434-14

LiftMaster Full Belt Assembly for 10ft Door

  • For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D
BK308

Jamb bracket J-08 #8 12 gauge

  • Sold by the piece
  • Height 4.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
86-RP08-102

LiftMaster Roll Pin Short Coiled 10/Pkg (K-SPSHORT)

  • Same as K-SPSHORT
OGH-6434-ECB

Manaras 1 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
801-300-001-01

Equinoxe Long Range Receiver 1-Door 433 MHz New Generation

  • 1000 ft range
  • 2016 +
  • This receiver will accept 8 equinoxe O/C/S remotes
Programming InstructionsInstructions de programmation
MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
OPH-6114-ECB

Manaras Opera-H 1 HP 120V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
PPK3

LiftMaster Passport 3-Button Mini Remote Control with Sec+ 2.0 Technology ** To extent of Inventory

Programming InstructionsInstructions de programmationSell Sheet
21002

Doorlec Hoist Interlock Switch

773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
97798

Marantec 2 Piece Logic Board with Terminal Strip for EOS Models

  • For use on Easy Operating System (EOS) units 4500E 4700E and M50.
  • Includes the terminal strip for direct replacement of boards that had a power surge or burned out.
  • The marantec old model number was 78914 it is now 97798.
Programming Instructions
756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

  • Knurled shank
  • Max torque = 6
K2A761

LiftMaster Coaxial Cable

  • For use with 315MHz receiver
K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

  • Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.
Installation Manual
178B34

LiftMaster Straight Door Arm

  • Will work with most residential garage door openers
  • Also known as: 012385041783 178B33 178B34 4178B0034B
41DB001-1

LiftMaster Circuit Board Assembly

  • For belt drive unit model 3500 (315MHz)
  • Assembly includes: Board end panel and light socket
  • Also known as 041DB001-1C
348.000

Whiting Tongue & Groove Bottom Panel Assembly with #77 Lock Made to Order. **Quote Only

  • 15-1/2" x 96" standard size panel.
  • Extra wide panels will carry an additional charge
  • Primer only
AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

1104-12FT-GREY

Residential Side & Top PVC Weather-Strip with cap 12' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
27-20100

Truck Door T-Style Spring Assembly 60" Long

  • Wire thickness: .24"
  • Inside diameter: 1.75"
  • Includes bolt plug and winding plug wound onto spring for stronger design
  • Cross reference: T#51042 W#2701
PED72

Pedestal Post 72" Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with a 6 in. center radius giving a tight professional look
BOARD075E

Manaras Replacement Board Kit (No Monitoring)

  • Replacement kit that includes BOARD070E (control board) & BOARD066R (power board)
  • BOARD070E is for standard operators without the monitoring function
  • For all Manaras operators built after October 2010
  • On-board 390MHz radio receiver accepts 50 remote controls
  • For older models built before October 2010 use BOARD060 or replacement kit BOARD065
Replacement ChartGuide de remplacement
MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1000000 codes
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
    • .......more details
Programming Instructions
MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW
SPREADER002

Chain Tensioner for 1" / 1-1/4"

  • Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
MJ7104

Doorlec Utility Switch 21800

  • Utility switch with a 'NO' and a 'NC' contact
  • Adjustable arm with roller
3AG3

Miniature Fast Acting Glass Fuse 3 Amp 250V (5/pkg) - 766124

  • 6 x 30mm miniature fast acting glass fuse
  • Rated voltage: 250V
  • Rated current:3A
  • ROHS compliant
15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

10FT-TROLLEY-SET

LiftMaster 10' Track Set for Trolley Operator 10-5810-P (2 pcs) *Actual length 155"*

  • Actual Length 12' 11"
  • Includes 2 pieces of 10-5810-P
029C98090

T-Style Complete Replacement Door White Stainless Steel Pkg 029C98090

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • Price varies according to size
888LM

LiftMaster MyQ Control Panel with TTC Sec+ 2.0 *No Longer Available*

  • Works with ANY Liftmaster Sears Chamberlain Access Master Master Mechanic Formula I True Value True Guard and Raynor Garage Door Opener Manufactured after 1998 using a amber / orange yellow or purple learn button.
  • Replaces existing control panel
  • Simple programming of new MyQ accessories and Security+ 2.0 remote controls and keyless entry products
  • Motion-activated opener light control
  • Adjustable light timer option
  • Lock feature
    • .......more details
Installation ManualManuel d'InstallationSell Sheet
.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
1091303602

Overhead 2-btn Transmitter 360 MHz model: 111663-3602

  • OVERHEAD DOOR remote control transmitter 109130-3602 works with 9 dip switch on 360 frequency.
  • Part number has changed to 111663-3602
Programming Instructions
475LMC

LiftMaster DC Battery Backup *** To Extent of Inventory

  • For use in Liftmaster 3500 3800 and 8500 models
  • 1 year warranty
Installation ManualManuel d'Installation
ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors and gates.
  • Retrofits easily to 1" to 1-1/4" sectional doors
  • Touch sensitive signaling allows for immediate stopping/reversing of motion
  • For sectional doors: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order
  • Lead wire: 22 gauge univversal
    • .......more details
Installation ManualWorksheetSell Sheet
ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

.306_5-1/4"-LH

Torsion Spring .306 x 5-1/4" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

  • omplete disk brake assemble including 2-wire solenoid
Installation Manual
41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

  • Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003
Installation ManualManuel d'Installation
41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

  • Gear and sprocket assembly for belt drive units after 2002.
  • Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.
Installation ManualManuel d'Installation
12-10029

Flanged Bearing 3/4" x 1-1/4" x 5/8"

25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

  • Steel construction Black E-coat finish
  • Consist of roller clamp wear plate stud plate and 5/16" lock nuts
  • Stainless steel studs and nuts
  • Cross ref: 5600
MJ00003

Micanan Brake Drum ** To extent of inventory

  • Fits all Micanan commercial operators equipped with a solenoid brake
  • Available only in complete kit # MJ00013
SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse latched or timed relay output
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Instruction ManualSell SheetWireless System Chart
CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

  • Reversing contactor with 24V coil
  • Same as part # LC2K12107B7
  • Demensions: 3.5" long x 2.25" wide x 2.25" high
  • Use 03-8024K as possible replacement
1920

Whiting Top Closure Mounting Plate for Insulated Doors

MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

  • Activates two 318MHz MegaCode receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
    • .......more details
Programming Instructions
232168

Capacitor 3/4 HP 220V 65 MFD

  • For LCO75 only
4007-8FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
1003-3"-200FT

Bottom U-Rubber 3" Black 200' Long

  • 200ft spool of vinyl insert.
1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

  • For 1-3/8" doors.
  • Color: Black
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
RP-3002

Rubber Plug 1/2"

  • To plug end of 3002 gum hose
1001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black dual-fin vinyl
32-48-160

Extension Spring 8' Door - 160 lbs Brown ** Replaced by 27-48-160

  • Double - Loop
  • 32" long 48" stretch 160 lb load
  • Springs sold individually
Spec Sheet
25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

  • Double - Loop
  • 25" long 42" stretch 90 lb load
  • Sold individually
  • Same as part number 109
  • Rated for 10000 cycles
Spec Sheet
28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-1
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

  • Extruded PVC construction with zinc plated thrust washer.
  • Cross Reference: 2471
26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

  • Seal molded from long lasting rubber
  • Cross Reference: T #69718 630300
26-40018

Truck Door Bottom L-Retainer 84" Long for Todco Roll-Up Doors

  • Galvanized steel construction for extra strength and corrosion resistance.
  • Fits both standard and heavy-duty bottom seals.
  • Pre-punched holes for added convenience
  • Cross Reference: T #61191 W #4034 260000
26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
25E10002

Truck Door End Hinge & Roller Cover Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Removable cover allows roller change without hinge removal
  • Cross Reference: W #1209 T #70162
  • Box quantity: 50
CB332A0500

Cable 3/32" 7x7 500' Galvanized

  • Galvanized cable 3/32" 7x7 500ft spool.
  • Cable break strength: 920 lbs.
Comparison charts