Devanco Canada - Get The Right Garage Door Opener‎ and Parts

041-0155-000

LiftMaster Safety Sensor Brackets 2021-Present

IMPORTANT NOTE: The new safety reversing sensor brackets are only compatible with the new safety reversing sensors (041-0136) and are NOT compatible with older style safety reversing sensors.
For safety reversing sensor brackets compatible with models pre-2021 refer to 041A5266-3.

TRACK-SET-2-138-7

2" Tracks Set 7'-0" Torsion 1-3/8" Door Clips for Wood Frame 12" Radius *** By quote only

91567

Marantec Sprocket Holder Assbly Standard Belt Rail

Compatible with Belt Standard Rail
For Marantec belt opener models: Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy 380 Synergy Solo M50 M55
Not for use on the heavy duty 1.2mm - 18 gauge rails
Measures 5"x2-3/4"x1-1/4"

EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
The cable connects to the antenna base on one end and the receivers F connector on the other.
If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
Compatible with all Linear receivers with Type F antenna connector
Receives signals in 288 to 320 MHz range

.......more details

Installation manual

SL595205UL

LiftMaster Industrial Slide Gate Operator 2 HP 575V 3PH with Heater - UL325 ***NLA

3 Phase: 575V is a discrete model without field-selectable voltage.
Includes factory installed heater kit.
P3 MOTOR® high starting torque continuous-duty motor.
Operator Duty Rating: 25 cycles per hour.
Metal frame 7-gauge pre-galvanized steel.
Worm gear reduction 20:1 worm gear reducer.

.......more details

MODKIT027B1

Manaras Universal Aux. Output Module B070 Field Install

MODKIT027B1 for field install simply plugs into the control board
Controls traffic lights
Works with BOARD070
Order MOD027B1 when ordered in conjunction with a commercial operator

Wiring instructions

SGO-311-1/2HP

Doorlec Slide Gate Op. 1/2HP 120V w/500w Heater

Engineered to accommodate heavy duty hight frequency commercial and industrial sliding gates with cantilever overhead or roller V track application
It is enclosed in a heavy steel base with 500 Watt thermostatically controlled heater and lockable cover
Three button control O/C/S
Adjustable clutch
Solenoid brake
Universal mount. Left or Right side

.......more details

24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

For Stanley Chain/Cable Openers Only
Not for Stanley Full Chain Openers
Replaces Part #920-0147

BK438/PR-USA

End Bearing Plate Flanged 11-GA 4-3/8" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing
EBF438- USA Style

SETR2641AM2B-C

Erone 2-Channel Mini Transmitter Blue 433MHz Proprietary Encoding

Heavy-duty construction
Elegant & easy to carry
Light grey and blue base with blue buttons
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

31110

Doorlec Sprocket 50B23 1" Bore KW/SS

GODEFROY-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Godefroy design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

Z9003-QUIET

Pusher Spring - 27" w/Sleeve 3" Tip Sold as a Pair

Quiet pusher spring 27" long with a large 3" tip and PVC sleeve over tube
11lbs of initial pushing strength per spring+ 3lbs per inch per spring
Sold as a pair. Pair includes 1 LH 226841 and 1 RH 226842

17350

Doorlec Cable 5ft with Antenna

IS40-XL

BEA Industrial Sensor Low Mount Dual Technology Presence Detection BEA-10IS40XL

Dual technology sensor combining presence and motion detection in industrial applications.
Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
Up to 7 minimum object targets
Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
Mounting height: 6.5ft - 11.5ft
NEMA 4

.......more details

Installation manual Sell sheet Cut sheet

RP-MTR-AO-RSL-12

Lynx Electric Motor AO RSL 1/2 hp 120V ** NLA

For residential opener MRE

100144

Linear Brake Shoe w/Lining

For commercial door operator

950-188

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Left Hand

Original Richards-Wilcox part

STATION082

Manaras Push Button Control Station 2-Button Nema 4/12

2-button 2 N/O contact
Plastic

BK009

Commercial Top Bracket Adjustable 1-Bolt Tall Sold per Piece *** Indef Delivery

Zinc plated
12 gauge roller carrier and base plate

RELAY026

Manaras Relay DPDT 120VAC

E/BLOP/276

Automatic Systems Audible Alarm for BL229

PHOTO-070

Manaras Monitored Photoelectric Cells N1 Thru-Beam 45' Range

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 45 ft

Manual

ME-00009

Micanan Trolley Track Spreader Bar Assembly 1 Unit Only

3/4" x 5.79" long
2 are included when bought in the kit #MX-00119

SL585101UL

LiftMaster Industrial Slide Gate Op. 1 HP 115/230/208V 1 Ph Heater NOT Incl. ***NLA

SL585UL features a heavy- duty industrial lockable metal cover.
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
Manual Disconnect when unlocked allows gate to be operated manually.
Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
Automatic Solenoid Brake prevents the gate from being back driven.

.......more details

Installation Manual Manuel installation Brochure Sell sheet

CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

Same as #2-30-1

SPRAY-431

Aluminum Touch Up Spray Paint 350g Bright White / Blanc Pur #431

350g
Replaces Gentek #801

.363-514-L-C

Cut-to-Length Torsion Spring .362 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

MW-00232

Micanan In-Line Torque Clutch Assembly Modification

Clutch is mounted in between motor and reducer flange
Overall length of operator increases by 3.85"
For models PRO-GH / GHC 1/2hp 3/4hp 1 hp 1.5hp & 2 hp

LM2W-B

LiftMaster Photoelectric Smoke Detector 12/24VDC Standard 2-Wire (LMPD24-2W)

Plug-in detector line mounting base included
Large wire entry port
In-line terminals with SEMS screws
Mounts to octagonal and single-gang back boxes 4-square back boxes or direct to wall or ceiling
Stop-Drop N Lock attachment to base
Removable detector cover and chamber

.......more details

02-410

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

DW-RS-200

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit NOC/NCC

The small radio transmitter unit and the pneumatic switch are packaged within the DW3S-200 case while the receiver is built into a Nema 4 case
It is equipped with a NC or a NO relay
Kit includes radio transmitter DWTR-200 433 Mhz and receiver RSW-R 433 Mhz
Battery is included # CR2032

Operating Instructions

111075.0001

Overhead Door Poly VBelt for RSX and RMX Jackshaft/Hoist Commercial Operators

Serpentine belt compatible with Overhead Door standard duty RSX and RMX operators.
6-rib poly VBelt
31"

MP00226

Micanan Track and #41 Waterproof Chain for 10' h Door

For 3/4 & 1 HP Micanan trolley operators

ALUM-5P6

Aluminum 24" x 100' Spool Iron Ore / Minerai de Fer # 5P6

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P6
Reverse side is #431 Bright White

Colour chart

PRO-TB-10081-U

Micanan 1 HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

MS-00002

Micanan Trolley Track Set 12 Ga. 9'6" (for 7' h. door) Includes 2 Angles Only

Set includes 2 tracks only
Chain NOT included

CAP2D

LiftMaster Connected Access Portal 2-Door Controller

Cloud-based credentialed access control.
Capacities include: 2 controlled gates / doors
25000 local resident capacity
6000 local event history (FIFO) offline from host
Multiple Holiday and Hold-Open Scheduling including one-time and repeating exceptions
Power: 2V DC Min. 1.5 Amps (transformer not included)

.......more details

TB-20

Molded Rubber Bumper Black 3 1/2" L x 6" W 3 1/2" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Molded Truck Bumper molded in one piece and will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
3 1/2" L x 6" W 3 1/2" Projection

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels are routed and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.

.......more details

PO17

Overhead Door Bottom Astrigal Rubber for Rolling Steel Doors Sold by the Foot

LA500XL20W

LiftMaster Single Arm Solar Package for LA500 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA500DC)

Kit Includes: LA500DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA500DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016
Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.

Manuel d'installation Installation manual Sell Sheet Brochure

154448

Wayne Dalton Residential Rubber Bottom Seal Sold per Foot

Fits 8000 and 9000 series steel doors
Designed for Thermaguard Foamcore and Thermawayne style doors
Works with most of the following Wayne Dalton door models: FCII 8000 8100 8200 9100 9400 9600 9700 9800 2411 2415 TS125 TG TW and many others.
3-1/4" bead width

36051R

Genie Replacement Carrage Assembly

For Genie belt drive garage door opener model 2040L

27191A

Genie Opener Sprocket 10 Tooth

10 Tooth Sprocket.
For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.

02-103L

LiftMaster Push Button Station 3-btn Surface Mount O/C/S Nema 1 with Maintenance Alert LED

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Works with Liftmaster MH commercial operator
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

.......more details

38066R

Genie Series II Intellicode Wall Console GBWC2-BX ** Disc. replaced by 39165R

Series II Multi-Function Wall Console (White Color)
Vacation Lock button disables remote access
Light Control Button
This item has been discontinued and replaced by #39165R

AIRSWITCH017

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit

The small radio transmitter unit and the pneumatic switch are packaged within the DW3S case while the receiver is built into a Nema 4 case
It is equipped with a NCC or a NOC relay
Battery is included # CR2032

Programming instructions

DM11VL-T/FORCE

Cable Drum Vertical Lift 11' D850-132 Pair Torque Force

11' Vertical Lift aluminum die cast alloy.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
Rated Lift per Drum: 425 lbs.
Max. Cable Diameter: 3/16".
Mounting: 1" solid shaft with 1/4" keyway.

.......more details

MCJH-12-115-ECB

Lynx MCJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325 ** Replaced by CDJH

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

CR-2

Battery CR2 3V Photo Lithium Battery

Camelion brand

MJ5011U

LiftMaster Medium-Duty Jackshaft Op 1/2HP 115V

The MJ door operator is designed for use on vertical lift sectional doors or small rolling doors and grilles.
Maximum recommended duty cycle: 12 cycles per hour
Floor level disconnect
Adjustable friction clutch
Heavy-duty solenoid actuated brake
Easily field converted for right or left mounting

.......more details

Installation manual Sell sheet

54-440

Limit Switch Snap Action Standard Short Hinge Roller Lever S54

SPDT

801-300-001-00

Equinoxe Long Range Receiver 1-Door 433 MHz Pre-2016 *** To Extent of Inventory

1000 ft range
Old generation - prior to 2016

Programming Instructions Instructions de programmation

27-24301

Truck Door Single Torsion Spring Assembly 89.5/48 for Todco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 89.50" Spring Length: 48" Wire Size: .243
Right hand wound
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire

.......more details

38874R3.S

Genie Electronic Circuit Board Assembly

Replaces board 38001R3.S and 37470R3.S
Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030

RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

Wireless for easy installation anywhere
Controls door open-close light on-off
Programmable pet opening (Opens to a pre-selected height of 6"-30")
Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
10-second closing safety delay
Transmitter program button

.......more details

Programming Instructions Compatibility chart

25-60502

Truck Door T-Style Ramp Handles Roadside (Left)

Black plastic construction
Cross ref.: 39504-1

7FT-BELT-SKYLNK

SkyLink 7 ft Rail Belt

111420.001.S

Overhead Cut-Off Switch for RSX Operator

Interlock switch for Overhead model RSX

Replacement Instructions

T114

Manaras Trolley Track 14ft for 3/4HP & All APT models up-charge *Actual length 198"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

SGP-353-2-575/3

Doorlec Gate Master 2 HP 575V/3P with TEFC Motor

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater included

MK00108

Micanan Telemecanique Contactor 24V for Logic Board with Contactor Interface

LC2K1210B7 mini contactor

M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 1" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

FGS-634

Devanco Food Grade Silicone 262g

For use in food and industrial plants
Stops squeaks
Prevents sticking and corrosion
Protects rubber mouldings and weather stripping

Safety Data Sheet Fiche de données de sécurité

8030234

Marantec Chain Connector Kit

Works for all Marantec Chain Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

GH753-L5

LiftMaster Gearhead with Brake 3/4HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

SHAFT017

Manaras Spacer for Trolley Tracks

SETMCIC9V

Erone 1-Channel Wireless Module 433 MHz

You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V) and black (0V) wire into power supply
Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
Works with any 433 MHz Erone receiver

Wireless System Chart

37301R

Genie C-Channel Chain Extension Kit

The extension kit for C-channel chain drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door

CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

� The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.

Programming Instructions

029-98200

W-Style Replacement Door White Stainless Steel Package 029-98200

Replacement door size between 96-1/4" - 98" wide x 90-100" high
Painted white
Stainless steel package
Includes Hinges Rollers and Cable

CPT4

LiftMaster Passport 4-Btn Remote Control ** Discontinued

The CPT-4 remote operates up to four different Security+ devices.
Three of the four buttons can operate with a telephone entry or access control system .
Great for gated drives or commercial uses.
Passport Technology use with CPWR Wiegard Receiver.
Also compatible with Homelink systems

Programming Instructions

MOTOR254-WIRED

Manaras Electric Motor 1/2HP 120/240V 1PH Wired

Continuous-duty base mount 60Hz
This item is compatible with BRAKE011

78LMC

LiftMaster Wall Control Panel

Wired multi-function control panel
Push-button is illuminated for convenience
Includes an adjustable light timer
For use with opener built January 1995+
Has a lock feature to cancel all radio control signals
Also known as: 945CB 41A6318 041A5273‑2 012381463183 41A5273‑14 041A6318

.......more details

Installation Manual Manuel d'Installation

41D1739-1

LiftMaster Motor & Travel Module (041-0236-000)

For model: 8550
Also known as: 41D8006-1 41D1739-1 41D1624-1 041D1624-1 41-0236-000

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
For Intellicode operators pre-1997 use GITR3 for best results
Operates with 315 & 390 MHz Intellicode 2 technology
Able to control up to 3 garage doors
Visor clip and battery CR2032 included
Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4

.......more details

Programming Instructions Instructions de programmation

PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

Monitored NEMA 4X enclosure through-beam type photocell
4-Wire
Suited for industrial environments
Range: 45 ft
Supplied with 3ft of wire

Installation Manual

ER4

Carlo Gavazzi Reflector 3-1/4" (84mm) Round

Can be used with the PMP12RI retro-reflective detector
Can be used with the reflector hood
Dimensions: 84 mm wide 7.4 mm thick

7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

I-Beam Chain Drive Rail for model 3595

1702LMC

LiftMaster Quick Release Lock

For all vault-type garages
For exterior manual operation
6ft industrial-strength connecting cable
Non-corrosive stainless steel faceplate and spur washer
Extension sleeve for doors up to 2" thick
Positive connection between cable and trolley release

.......more details

1702LMC Manual

7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

Price reflects cost if purchased with an opener

AW-14

Miller Edge Air Wave Switch in ABS Box

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Molded enclosure
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm

.......more details

Instructions Manual Sell Sheet

ME123-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

41DB002-2

LiftMaster Circuit Board Assembly *** To Extent of Inventory

Assembly includes: Circuit board end panel and light socket
For belt drive units with two lights such as 3850C
Same as 41A5685

T-931

FL-Allstar 1-btn Transmitter 108787-311 MHz

This one channel transmitter controls one residential door(open-close with the same button).
It has a nine switches encoder with three positions: + 0 and - .
Manufacturer's model number: 9931T (190-108787)
Dimensions: 4 5/8'' x 2 3/8'' x 1 1/4''

Programming Instructions

.295_3-3/4"-RH

Torsion Spring .295 x 3-3/4" x 12ft RH Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft

41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

For LiftMaster Chamberlain & Sears openers built from 1993-1998
Kit includes: Saftey sensors 24" wire and gel connectors
Replacement: 041-0136 with the 041-0155-000 brackets

LYNX-RCVR-OCS

Lynx O/C/S Receiver

For use with Lynx o/c/s transmitter # T3B-OCS

Compatibility chart

T1B-DS

Lynx 1-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Use with receiver (RA-LYNX-RCVR) for open/close on commercial operators
Same as model 2211-L (TX)

.......more details

Compatibility chart

H14G04

Hinge #4 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#4 position
Use between sections 4 and 5
Same as part number 244

.......more details

SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse latched or timed relay output
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Wireless System Chart

TRANSF143

Manaras Transformer 120/240-24V 40VA

Transformer 120-240V Primary 24V Secondary 40VA

DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

Replaces DRUM004
Brake drum with edges for current braking systems (2000 - current)
Used on all Manaras operators except Gear Head models.
Use with BRAKEPART019 (old part BRAKEPART017)

AP5

Linear MegaCode Wireless Access Controller 318 MHz

Ideal for gated communities parking facilities and industrial sites
Easy to set-up and use up to 480 remotes can be programmed with a few keystrokes
Easy to add suspend and delete transmitters through programming mode no transmitter dipswitches to set
Supports 480 block coded transmitters or 238 individual transmitters/wireless keypad entry codes
Supports up to six fully supervised safety edge transmitters
AP-5 replaces Linear's AP-4; AP-5 available for replacement of existing AP-4 units only

.......more details

Programming Instructions