Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Linear Corp
DTKP

Linear Delta-3 Wireless Keyless Entry 310 MHz

  • Activates multiple Delta-3 receivers
  • 1-8 digit PIN
  • Backlit keys for easy viewing
  • Mounting hardware supplied
  • Power: 9-volt battery
  • Codes: 256
    • .......more details
Programming instructions
620-101293

Linear Apex II Module

  • Newer model from Jan 2016
  • The APEX II is backwards compatible but you will need to add monitored external entrapment devices.
MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

  • MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
  • It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
  • Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
  • Features Include:
  • Internal antenna
  • 1-6 digit PIN for each user
    • .......more details
Installation Manual
2200-886

Linear Sprocket 50B20 1" Bore 3SS

308301

Linear 2-Channel Multi-Code Key Ring Transmitter 300 MHz

  • Open/Close remote for 2 doors
  • Compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Programming instructions
DT3+1

Linear 3+1 Channel Transmitter 310 MHz

  • Activates one GRD gate receiver and up to three separate Delta-3 receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 independent codes for gate + 64 multi-channel codes for doors (set by dip switches)
  • Frequency: 310 MHz
    • .......more details
Programming Instructions
MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No cables or coiled wires
    • .......more details
Programming Instructions
MDT-1B

Linear 1-Channel Visor Transmitter MegaCode Block Coded 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
  • Sold in lots of 10
    • .......more details
Programming instructions
302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

  • The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
  • The 300 MHz frequency is compatible with standard Multi-Code transmitters
  • The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
  • Operates on 12-24 volts AC or DC power
  • Two channels
  • Whip antenna
    • .......more details
Programming Instructions
LDCO863B

Linear DC Powered Garage Door Opener Accepts Both Belt or Chain Rail

  • Ultra-Smooth and Quiet Industry leading performance with variable speed operation soft start/stop and ultra quiet motor
  • Integrated Battery Backup Energy-Efficient LED Lighting Long life dimmable LED light panels included. Secure.
  • Responsive Remote Control Linear MegaCode remote controls operate over long range and employ high-security technology
  • Release the operator’s quick-disconnect trolley to open or close the garage door manually
  • Self-Diagnostic System: Confirms proper operation and alerts users both audibly and flashing the lights. In the event of a problem it pinpoints the trouble and alerts users by flashing the courtesy lights
  • Linear ® Smart App Advanced real-time monitoring and control of garage doors from any mobile device. * Assign custom access and permissions for up to 10 authorized users and schedule door and light operation.*Wi-Fi and internet connection required
    • .......more details
Remote compatibility chart
LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

  • The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
  • DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
  • Optional Battery Backup available for added peace of mind. Sold separately
  • Low-power standby mode dramatically reduces energy consumption
  • Supplies 800 Newtons of lifting force for heavy doors
  • Compatible with belt-drive or chain-drive T or I beam rails up to 10'
    • .......more details
Installation manualSell sheetRemote compatibility chart
10FT-BELT-LINEAR

Linear 10ft Belt Drive Rail for residential openers (HBT10C)

  • For use with Nice/Linear LDCO863B LDCO841 LDCO801 LCO75 LSO50 LDO50 and LDO33 garage door operators.
  • Fully-assembled and pre-tensioned 10-foot belt-drive T-rail
  • This “T-rail” can be converted to stronger “I-rail” with Nice/Linear’s bolt-on Carriage House Conversion Kit CHCR-10.
MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

  • Activates three 318 MHz MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
MTR3

Linear 3-Channel Visor Transmitter 318MHz ** To extent of Inventory

  • Activates three MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Visor clip mounts vertical or horizontal
  • Power: One 2032 battery
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming instructionsInstructions de programmation
ACP00942

Linear Control Board for Telephone Entry System AE-100

  • Board only for AE-100 telephone entry system
2100-765

Linear Shaft Pulley HSLG

HAE00070

Linear LDCO Control Board (841/850/852/863B)

F310

Linear GTO Digital Keypad (Wired or Wireless)

  • As a wired keypad it can operate garage door openers and gate openers that require 24 volts or less and accept normally open contacts.
  • As a wireless keypad it can be used with any gate or garage door opener that receives a 318 MHz RF signal.
  • The keypad must be used in conjunction with the GTO garage door receiver kit (part # RB709) on any other garage door.
  • You may program up to 25 different personal entry codes allowing you to give different entry codes to different users
  • After entering a valid code pressing any key while the gate is opening will stop the gate; pressing any key while the gate is stopped and the gate will reverse direction.
  • The keypad will not affect the auto-close setting of your gate opener system.
    • .......more details
HAE00057

Linear LDCO Motor with Encoder

  • For LDCO800 operators manufactured before 04/2011 compatible replacement part number HAE00053 for motor with encoder and HAE00054 for encoder board.
0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

  • Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
  • The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
  • The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
  • The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
  • By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
  • The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.
    • .......more details