Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
MK00711

Micanan Varistor Harness 380V with Yellow Wires

22-00627

Truck Door Grab Handle 13" Chrome Steel

  • Steel construction Chrome finish
  • Cross ref: Eberhard 4300
MM00158

Micanan Solenoid Lever HR Left

Z9006

Shaft Key Stainless Steel Straight 3" x 1/4"

  • 3" Straight Key
  • Stainless Steel
50195

Doorlec Front Idler Assembly with Shaft 41B9 Oilite Trolley Models

  • Fits all Doorlec commercial trolley operators
  • Same as # 50190
MOD003

Manaras Time Delay Mod. 1.5 Sec 24V for Contactor Models

  • To be ordered in conjunction with a commercial operator
  • Order MODKIT003 for field upgrades
26CW942255-CUT

Truck Door Bottom Panel with Hardware (15.5" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer
    • .......more details
27-24417

Truck Door Dual Torsion Spring Assembly 96/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 35" Wire diameter: .187 Winding cone color: White
MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: nominal 30msec.
    • .......more details
9150000630

1/4" Stops ONLY 100/pkg

  • Stops only - 100 per pack
MD00420

Micanan Flex Coupling Lovejoy 3J x 3/8"

SEF2410

Erone Ultra Flat Infrared Photocell 10M (33ft)

  • Fixed orientation 1 sender and 1 receiver
  • Range 10M (33ft) in all conditions
  • Adjustable Sensitivity
  • 1 "NO" and "NC" contact
  • Power supply 12/24 Vac/dc
  • Will work with all commercial operators
    • .......more details
Wireless System Chart
MK-00398

Micanan Capacitor 370V 20 Mf

  • For limited duty 220V operators
.273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Orange/Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MU22-2WIRE-E-G

Miller Edge MU22 2-Wire End Gray - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
503267

PEEK Vehicle Loop Detector 24V with Harness Nema 1 ** Discontinued

  • Enclosed requires separate 24VAC power.
  • Wiring harness with plug for detector included.
  • OPEN only (all LiftMaster operators) or SAFETY/HOLD OPEN only (operators with type B2 T TS or T1 control wiring) when vehicle passes over loop wire
  • Requires a loop of wire embedded in the ground to connect to the detector.
  • Requires 2-wire output connection to door operator and 24VAC power
  • Also known as: G50625S24
    • .......more details
PRO-TB-5011-E

Micanan 1/2HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Non-Monitored board NO photocells
  • On-Board receiver holds up to 20 transmitters
MK-00649

Micanan UL325 Monitored N1 Thru-Beam Photocell

34201

Doorlec V-belt Pulley MA20 2" x 5/8" bore

.312-6-R

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
41C5141-1

LiftMaster Square Rail Trolley Kit Chain Drive

  • Same as: 062313 41C5141 41C5141-1
  • Compatible with all Chamberlain and Craftsman square rail chain drive models
9150000626

3/32" Stops ONLY 100/pkg

  • Stops only 100 per pack
43402

Carriage for R-99 Trolley

41A2780

LiftMaster Chain Pulley Bracket Kit

  • Also known as: 1B3214 1A2780 1C2762 41A2780 41B3214
  • Compatible with ATS 2595 3595 models
CP-LX600

Lynx Thru Beam Photocell N1 - Replaced by FR-1000 Fraba

  • Used on the UL325 operators
28-30081

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Roadside (LH)

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
  • 6" radius for smooth door operation
  • Track coupler used for proper alignment at track joints
1004-134-12'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 12 ft**Actual Length 12'2"***

  • For door thickness 1-3/4"
PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
WB-400-24V

Audible Warning Device Exterior Surface Mount 24V

  • 6" bell 85 DBA
BG790-50-53

LiftMaster Industrial-Duty Wishbone Barrier Gate Operator 1/2 HP 575V 3 Ph Arm & Weight Incl

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • Heater sold separately
  • Includes 24 ft. wishbone arm with black and white stripes and two counter weights
    • .......more details
Installation manualSell Sheet
225-120R

Electraray Rotating Warning Light Red 120V

  • Incandescent warning light
  • 90 flashes per minute
  • Operating temp. 31 to 150 degrees fahrenheit
  • Height: 7-1/4" Diameter: 5-1/2"
  • Enclosure rating: Nema4X
8L5-OCS

Devanco O/C/S for 8-Doors L5

  • Compatible with all Liftmaster Logic 5 Commercial and MAXUM operators
  • Works with the 850LM and 860LM receiver to control OCS on 8 doors
  • also will do Open/Close for 24 doors.
  • 5.5" length x 3.25" wide x 1.25" thick
  • Splash-proof
Programming InstructionsInstructions de programmationSell sheet
RESET008

Manaras Resettable Overload Fuse 11A 1 Phase

MGH-6115-ECB-RH

Manaras 1.5 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation manualSell sheet
FRONTIDLER007

Manaras Front Idler Assembly #48 (#410)

108D36

LiftMaster Light Lens (K108D0036-2)

  • Compatible with one light operators
  • Compatible with the following Liftmaster models: 1040 1045 1055 100WD 200WD 1140 1145 1155 110WD 210WD3 1240 1245 1255 215WD 15WD 1240R 1245R 1255R 985 1046 1146 1246 1246R 1056 1156 1256 and 1256R
  • Compatible with the following Chamberlain models: 2000 2100 and 2200
  • Dimensions are 7-1/4" wide X 4-3/4" high X 3" deep
.312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
39913625

Hitch Pin Forged Wire Handle 3/4" x 6-1/4" Red

  • Usable length is measured between the shoulder and the cotter pin
38079001

Agri Safety Chain GR 70 3/8" x 69"

  • Min. strength: 20200 lbs
  • Includes hook joiner link & tag
PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Sold in a 100 pack
    • .......more details
Programming InstructionsInstructions de programmationSell sheetBrochure
108D79

LiftMaster Light Lens 108D0079M

  • Replaces 108D68 and 108D68-1
OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

  • Power LED
CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

  • Shaft Mounted Junior Hoist
  • 4:1 Reduced Drive
  • Sprocket: 41B36. Bore size: 1-1/4" diameter
  • Cross Reference: OMI 4020
  • Requires minimum 3/8" center line offset.
  • Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.
    • .......more details
Sell sheet
MA007

LiftMaster Cogged Belt 4L290

  • Used on Mega Arm gate operators
7543.2

Whiting Bottom Panel with Seal & Channel TempGuard 13-5/16" x 95-1/4" FPW

  • Replacement for serial # 164352
.331-514-R

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
  • For spring filler use part no. SPRING-FILLER
CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** NLA

  • Replaces the 4 wire AO Smith electric motor
C-123-L

Aiphone Door Answering Intercom System

  • Door answering intercom system for home or business
  • Master room station: 7-1/2" X 5-1/8" X 1-3/4"
  • Door station: 4-3/4" X 3-7/16" X 1-1/8"
  • Power supply 6V DC 800 mA not included
BCH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand ***Replaced by CRBH753L5-LH

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Comes with CPS-UN4 photoeyes
  • External brake included
Installation manualManuel d'installationSell sheetBrochure
T-832-H

FL-Heddolf 2-btn Transmitter 311 MHz (T-832-S) ***Discontinued

  • Open/Close remote for 2 doors
  • Battery 12V included
  • Compatible with Keystone T-832-H and old Allstar T-832
  • 8 dip switch
  • Same as P220-2K
Programming instructions
ALUM-547

Aluminum 24" x 100' Spool Sable / Sablon # 547

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 547
  • Reverse side is #431 Bright White
Colour chart
BL-14

Barlock Kit Complete for 14ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (85-1/2")
Assembly Manual
LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

  • The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
  • DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
  • Optional Battery Backup available for added peace of mind. Sold separately
  • Low-power standby mode dramatically reduces energy consumption
  • Supplies 800 Newtons of lifting force for heavy doors
  • Compatible with belt-drive or chain-drive T or I beam rails up to 10'
    • .......more details
Installation manualSell sheetRemote compatibility chart
MIRM-T2-50

Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
    • .......more details
26-943255

Truck Door Bottom Panel with Seal (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
734

Fasteners Track Bolt 1/4-20 x 3/4" 250/Box

  • Knurled shank
  • Max torque = 6
23-20088

LiftMaster On/Off Switch 120V 15A

  • Also known as: SN5530039 MA019
K75-34828

LiftMaster Idler Shaft Kit

  • Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
  • For SL575 SL585 with GL Board
346

Cable Clamps Galvanized 3/16" Sold per piece

  • Galvanized malleable cable clip
SSZP15-6-114

Solid Shaft 1-1/4" Keyed 15'6" Zinc Plated

  • Actual length is approx. 15'-6"
CR-2154

Raynor Replacement Photocells *** Discontinued

  • The original PEC-R3 Sensors manufactured by Raynor are no longer available.
  • The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
  • Includes both the Emitter and Receiver sensors
  • Includes new sensor mounting brackets. Wires are not included.
  • These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
  • The new CR-2154 Sensors require new mounting brackets (included) to be installed
    • .......more details
MK-318-2

Skylink 2-Button Keychain Transmitter

  • Easy to program.
  • Remove key fob from the car for enhanced security.
  • Compact-size 2-button transmitter can operate two garage doors with GB-318C Garage Door Receiver (sold separately).
  • 3V Lithium battery included.
  • FCC/IC approved.
  • Works Mastercraft made by Skylink
    • .......more details
KN-318

Skylink Wireless Keyless Entry

  • The Keyless Entry System is compatible with all Skylink Garage Door Openers.
  • Back-Lit keypad makes it easy to see the numbers even in the dark.
  • Weather-proof cover protects the keypad from wet and windy weather conditions.
  • Passcode Lock Timeout - Keypad will automatically lock for 10 minutes after ten incorrect passcode attempts.
  • Operated by one AAA Alkaline battery. •FCC/IC approved..
Programming instructionsInstructions de programmation
MG1300

LiftMaster Maglock 12/24 VDC 1300 LB Strength

  • 1300 pounds holding force
  • Equipped with an attached welding bracket and junction box with knockouts on four sides for fast and easy setup
  • Steel armature and mounting plates
  • Designed for minimum 1.5' gate frame
  • Outdoor face and side plate mounting
  • 12 or 24 VDC power
    • .......more details
MS001

LiftMaster MSL & MSW Control Board (K79-60142)

  • Replacement logic board for the Mega Slide and the Mega Swing gate operators.
  • Can be used in various Autogate Operators same as AG001
CABLE-NR-316-SS

Cable No Roll 3/16" 19x7 Stainless Steel 500ft

  • 19X7 SS 3/16” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
  • A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
CR2025

3V Lithium Button Cell

5001-10-BLACK

Residential Side & Top Weather-Strip 10' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
1104-16'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

  • Exterior Through-Beam Photocell
  • Sensing Distance 45 Feet
  • UL325/2010 Recognized Component
  • Comes with Sender Receiver and Brackets
  • NEMA 4 & 4X
Installation manual
60-7252

Wheel Chock Wall Bracket 14"w x 8"h x 4-1/2"d Painted Grey

  • Wall bracket only
  • 4-1/2" projection
.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

  • Spring wire only. Cones and Filler extra
5001-WG-12-MOAK

Residential Side & Top Weather-Strip 12' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
1104-16FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
28-03090

Truck Door 1" Vert. Track and Right Angle Assbly Curbside (RH) 96.5" Todco Style**To extent of inventory

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes right angle frame 1" track and operator bracket
  • Fits doors 72" - 90" high
54-440

Limit Switch Snap Action Standard Short Hinge Roller Lever S54

  • SPDT
801-300-001-00

Equinoxe Long Range Receiver 1-Door 433 MHz Pre-2016 *** To Extent of Inventory

  • 1000 ft range
  • Old generation - prior to 2016
Programming InstructionsInstructions de programmation
L-7-50-0-M

Cable Tie Standard 50 LB Black 7" Nylon 1000/pkg

  • Ultraviolet Resistant
OTBH-6213-AE05

Manaras Trolley Operator 3/4 HP 240V 1Ph with Elect. Circuit Board Apt. Model

  • A premium low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 30 cycles per hour 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation manualSell sheet
28002

Doorlec Flange Bearing F-360-13 5/8" Hole

  • Fits model LJ
12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

  • Fits model LJ / LJH
20113R

Genie Limit Switch Screw Drive

  • For use on Genie screw-drive openers.
  • Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
  • Replaces either the UP or the DOWN limit switch
  • Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
  • Not compatible with excelerator models
T-832-M-H

FL-Heddolf 2-btn Mini Transmitter P219-2K-311 MHz (T-832-M-S)

  • Open/Close mini remote for 2 doors
  • Keychain and 12V battery included
  • Compatible with Keystone T-832-H and old Allstar T-832
  • 8 dip switch
  • Same as P219-2K
Manual
2594

Whiting Bearing Retainer

1003-3-DF-CUT

Bottom U-Rubber 3" Dual Fin Black Sold per Foot

  • Sold in cut-lengths per foot.
  • Dual fin
MB-02002

Micanan Electric Motor Only 3/4HP 110/220V 1PH TEFC

  • Base mount motor fits: TW TBW JW HW HHDW SDW
5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

  • Pierced track
MEL-T315

Miller Edge MEL Transmitter 315 MHz 2nd Generation

  • MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices
TAPS1458W

Stainless Hinge Screw 1/4" x 5/8" Self-Threader with Washer

  • Priced per each
V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

  • Bead diameter 3/16" - 7/32" +/- tolerance
ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ME123-M-YEL-RH

Miller Edge Yellow RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ME123-M-BLK-LH

Miller Edge Black LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
K74-30754

LiftMaster Battery Harness 1 unit only

  • For LA400
  • 2 harnesses required per operator- 1 for each battery
Z9207

Sensor Guards Sold as a Pair

  • Made to fit over garage door sensors
  • Will fit over most popular sensor brands
  • Protects sensors from coming out of alignment
  • Helps protect against water corrosion
  • Easily installs to the door track or the the wood door frame
  • Sold by the pair
    • .......more details
MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
41A8094

LiftMaster Residential Door Arm Kit Straight and Curved Arms

  • Kit contains: Straight arm Curved arm and hardware bag
95358

Marantec Front Idler Assembly

  • Complete Roller holder assembly for ML-Series rails
  • Used for belt and chain drive opener rails
  • Same as # 8030432
SPECIALPANEL001

Manaras Complete C-Box Special Order

  • Includes limit system limit shaft.