Devanco Canada - Get The Right Garage Door Opener‎ and Parts

25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

Steel construction Plain finish
Contoured for proper lock engagement
Cross Reference: W #2804

25E10270

Truck Door Shaft Cover for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Attaches to bottom panel for roller support
Shaft cover for 1 stud
Cross Reference: W #1021

26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)

26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

Allows for easy door operation.
Seal protects cargo area from dirt and moisture
Will not bunch up as bottom panel goes around top curve.
Co-extruded using rigid PVC backing with flexible PVC seal against the door.
For use with right angle vertical track
Fits only right angle vertical track assembly.

.......more details

41A7562

LiftMaster Light Lens for 8360 8550 8355

Replacement light lens

C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF175

.207-134-R

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

108135.0004

Overhead Serpentine V- Belt for JST 31"

Overhead Door commercial garage door opener serpentine belt 108135-0004
Type "J" 31"

ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

2" Wide 1-1/4" High

7001-16-W/B

Commercial Side & Top Weather-Strip 16' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

External 8" coaxial antenna included
Security+ rolling code technology and/or Dip switch compatibility
12 VDC or 18-35 VAC/DC jumper selectable
Momentary or constant contact selectable
For replacement antenna use 41C3196
Accepts up to 31 remote control codes on Normal Security setting

.......more details

Programming Instructions Instructions de programmation

.331_6"-LH

Torsion Spring .331 x 6" x 12ft LH Red/White

Wire size: .331
Inside diameter: 6"
Length: 12 ft

.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 5-1/4"
Length: 12 ft

.312_5-1/4"-LH

Torsion Spring .312 x 5-1/4" x 12ft LH Yellow

Wire size: .312
Inside diameter: 5-1/4"
Length: 12 ft

.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 3-3/4"
Length: 12 ft

.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

.295_2-5/8"-LH

Torsion Spring .295 x 2-5/8" x 12ft LH Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft

.243_2-5/8"-LH

Torsion Spring .243 x 2-5/8" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft

.295_2"-LH

Torsion Spring .295 x 2" x 12ft LH Blue

Wire size: .295
Inside diameter: 2"
Length: 12 ft

.273_2"-LH

Torsion Spring .273 x 2" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

813LM

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0 ** To extent of inventory

Encrypted DIP style three-button remote control with Security+2.0 technology
Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
Easy to code 12-position DIP switch offers up to 4096 codes
May also be programmed for Open/Close/Stop functionality
Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
Compatible only with Security+ 2.0™ commercial receivers and operators

.......more details

Programming Instructions Instructions de programmation Sell Sheet

811LM

LiftMaster 1-btn Dip-Style Transmitter Sec+ 2.0 ***No Longer Available

Extreme range 1-btn encrypted DIP style remote control.
Easy to code 12 position dip switch offers up to 4 096 codes.
NOT compatible with the new Liftmaster 8550 and 8360 garage door openers.
Compatible with the 850LM Universal Receiver.

Programming Instructions Instructions de programmation Sell Sheet

71-B575

LiftMaster Interior Mount Brake Assembly 575V

Instruction Manual

41A5668

LiftMaster Gear & Sprocket Assembly for ATS211X

For models: ATS211X ATS2113X
For older model ATS211 use part number 41C4470

Installation Manual Manuel d'Installation

23-2015

Limit Switch DPDT 15A 125/250VAC (K23-2015) *** No Longer Available

29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

K75-18493

LiftMaster Chain Guide Kit

Compatible with SL575 SL585 SL595 SL595U SL595UL and IHSL
Kit includes chain guide retainers and bracket for guide holders

T-639

FL-Allstar 3-btn 9-Door O/C/S Transmitter 107476-311 MHz

This remote can control (open-close-stop) up to nine doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 639T (190-107476)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8".

Programming Instructions

41A3489

LiftMaster Complete Trolley Assembly for chain drive

For chain drive models 1984 +
Compatible with Sears Chamberlain

Installation Manual

144C54

LiftMaster Idler Belt Pulley

Wide idler belt drive pulley
For square rail assemblies

24-115-1

Relay 8 terminal 115VAC DPDT

For most operators with contactor
Will work on Liftmaster MH Lynx MCJH and more

144C56

LiftMaster Idler - Cable Pulley for chain drive

For square rail assemblies
Same as 144C0056

.312_6"-RH

Torsion Spring .312 x 6" x 12ft RH Yellow

Wire size: .312
Inside diameter: 6"
Length: 12 ft

.421_5-1/4"-RH

Torsion Spring .421 x 5-1/4" x 12ft RH Gold

Wire size: .421
Inside diameter: 5-1/4"
Length: 12 ft

.306_3-3/4"-RH

Torsion Spring .306 x 3-3/4" x 12ft RH Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft

.283_3-3/4"-RH

Torsion Spring .283 x 3-3/4" x 12ft RH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft

.207_2-5/8"-RH

Torsion Spring .207 x 2-5/8" x 12ft RH Brown

Wire size: .207
Inside diameter: 2-5/8"
Length: 12 ft

.262_2"-RH

Torsion Spring .262 x 2" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 2"
Length: 12 ft

.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

.283_1-3/4"-RH

Torsion Spring .283 x 1-3/4" x 12ft RH White

Wire size: .283
Inside diameter: 1-3/4"
Length: 12 ft

373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

Visor clip and 3V lithium button cell (CR2032) battery included.
Same as Chamberlain model 953D

373LMC Manual

11801

Doorlec Oilite Cam

Fits 5/8" shaft fine thread.
Grooved 5/8" - 24 x 3/8"
Requires 2 per cam shaft

CP-SW-AT

Lynx Single Limit Switch

T1B-DS

Lynx 1-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Use with receiver (RA-LYNX-RCVR) for open/close on commercial operators
Same as model 2211-L (TX)

.......more details

Compatibility chart

PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

New version board works on operators with a red cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built June 2008 or later (date code 0806 or newer)
This board does not have a transformer.

SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output Relay number 4 can be setup to latched output
Can be used for O/S/C
Power requirements: 12/24Vac/dc

.......more details

Sell Sheet Brochure Wireless System Chart

SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse latched or timed relay output
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Wireless System Chart

LIMIT025

Manaras Single Snap-Action Limit Switch with Flat Lever

Replacement for LIMIT001
For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

BRAKEPART018

Manaras Brake Shoe Assembly Kit

Kit includes SHOE001 & SHOE002 for old brake system.
Fits all Manaras operators except gear head made prior to 1999.

Drawing

BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

Replaces BRAKEPART017 SHOE008
To use on brake drums with edges (DRUM004)
New part number is BRAKEPART019KIT

Installation Manual

RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 4 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).

Programming Instructions - ECB Programming Instructions - CONT

RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.
Includes a commercial receiver antenna for increased range.
Will be replaced by RADIO-RE901A

.......more details

Installation Instructions

8331.96

Whiting Brush Top Seal assembly 96"

Fits Coldsaver and Tempguard

108210

Linear 1-Channel Multi-Code Key Ring Transmitter 310 MHz

Open/Close mini remote for 1 door
Compatible with 310 MHz Stanley and Multi-Code receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz *** No Longer Available

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

HAE00014

Linear Pulley and Bracket - Chain (HCT)

138BL

1-3/8" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1702

4005-16FT

Aluminum Retainer only for Heavy Brush 16' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

3" yellow vinyl insert 200ft spool.

1015-1-3/4-8'

Rigid Vinyl Bottom Retainer Raised Centre 8' Long

Black - for door thickness of 1-3/4"

1015-1-3/4-12'

Rigid Vinyl Bottom Retainer Raised Centre 12' Long

Black - for door thickness of 1-3/4"

1006-1-3/8-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-3/4-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1006-1-3/4-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

For 2" thick doors.

1104-18FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

TC1

Tri-Code Transmitter 1-btn Visor - DISCONTINUED

10 dipswitch format 3-position slide switch
Compatible with Multi-Code 300 & 310 MHz Delta3 & Stanley 310 MHz
Discontinued 7/1/13

375LMC Programming Instructions Instructions de programmation pour 375LMC

1104-7FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 7' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1102-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

25-42-160

Extension Spring 7' Door - 160 lbs Brown

Double - Loop
25" long 42" stretch 160 lb load
Sold individually
Rated for 10000 cycles
Same as part number 116

Spec Sheet

25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

Double - Loop
25" long 42" stretch 90 lb load
Sold individually
Same as part number 109
Rated for 10000 cycles

Spec Sheet

28-32072

Truck Door 2" Horizontal Track with 8" Radius 107" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

SPECS: Length: 120" Fits door sizes: 101" - 114" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-20400

Truck Door Bracket for Torsion Assembly Roadside (LH) for Todco Roll-Up Doors

Steel construction
Zinc plated finish
Cross Reference: T #51036-2 W #4028 360000

R5998

Shaft Collar 1-1/4" OD 2" 2 Set Screws 3/8-16

With 2 set screws

Z9004

Shaft Key Bent 3" x 1/4"

3" Bent Key
Zinc Plated Steel

R5209

Cast Iron Pulley 4" **** Indef Delivery

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Cast iron pulley mounted on two pressed sealed bearings
300lb load rating

R5211

Cast Iron Pulley 5" with stud

5" Cast Iron Pulley with double stud
cast iron pulley mounted on two pressed sealed bearings
Maximum cable diameter: 1/4"

846CABLECL

Cable Clip - 14GA

Cable Adjustment Clip
3 hole pattern
Used to attach a cable to the S-hook on an extension spring system
Same as part number 423

903021ORBG

Operator Reinforced Bracket 21" Galvanized

Comes with clevis and clip pins. 24 per carton

BK312

Jamb bracket J-12 #12 12 gauge

Sold by the piece
Height 5.0" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot accepts 5/16" track bolts

25-10103

Truck Door 2" Sealed Roller Steel for Whiting Roll-Up Doors

Zinc plated finish 10 roller ball design
Shaft Length: 2.62" Overall Length: 3.41"

2'6X6PO50

Devanco Loop 2'6 x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

WB-400-24V

Audible Warning Device Exterior Surface Mount 24V

6" bell 85 DBA

SLT2-22

Rolling Steel 2" Crowned Slat 22-ga Galvanized

.437_5-1/4"-LH

Torsion Spring .437 x 5-1/4" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 5-1/4"
Length: 12 ft

PRO-TB-7543-U

Micanan 3/4HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

1014-1-5/8-8'

Rigid Vinyl Bottom Retainer Notched 8' Long

Black - for door thickness of 1-5/8"

12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

Actual length: 179" (14' 11")

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

PPLK1-10

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 10/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details