Devanco Canada - Get The Right Garage Door Opener‎ and Parts

1104-7FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 7' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-24401

Truck Door Dual Torsion Spring Assembly 93/33 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 93" Spring Length: 33" Wire diameter: .182 - Winding cone color: Green

27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-2 T #59129-2 W #4014 330000

R5201

Cast Iron Pulley 3"

Bored for 3/8" diameter bolt
Cable diameter: 1/8"
Cast iron pulley mounted on two pressed sealed bearings.
Radial Load: 400lb

25-01439

Truck Door 1/8" Stainless 5/16" Eye 115" for Roll-Up Doors Sold per Pair

Works with both Whiting and Todco doors
Aluminum eye ends are used on 5/16" eye cables
Cable size: 1/8"

25-60502

Truck Door T-Style Ramp Handles Roadside (Left)

Black plastic construction
Cross ref.: 39504-1

3BXLT

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic

Double pole contacts
Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
Comes with 2 keys
H=7" W=2-3/4" D=2-3/4"

3BXT

828LM

LiftMaster Internet Gateway Sec+ 2.0

Monitor and control your garage door opener from anywhere in the world right from your smartphone or computer
Easy and fast installation through your in home router.
Only works with new MyQ compatible Garage door openers
Controls up to 16 garage doors gate operators or MyQ-Enabled devices.

Programming Instructions Instructions de programmation Sell Sheet Brochure

28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
For use with 1" diameter rollers

PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
3-button keychain remote with proximity sensor
2x the range of standard remote controls
Narrow-band transmission

HAE00087

Linear Safety Beam Sender & Receiver with Wire

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.
Replaced HAE00002

10LZR-FLATSCAN-SWB

BEA LZRFLATSCAN Kit Black 2 Sensors + Cables & Accessories

Time-of-flight presence sensor for use as a stand alone safety sensor on automatic pedestrian swing doors.
Can be used as a reactivation sensor on the approach side of low energy doors.
Generates 170 detection points across a single curtain allowing for coverage over the entire face of a single door leaf including the hinge area.
Finger Detection Technology™ utilizes 100 detection points within the hinge area of the door protecting hands and fingers while the door is in motion.
Max. detection range: 13' with a reflectivity of 2%
IP54

.......more details

041D8993

LiftMaster Cover Silver 8365W 83650-267

Replacement LiftMaster® Cover.
Compatible with various LiftMaster® 8365W Series WiFi® AC Chain Drive Garage Door Openers; powered by myQ

LZR-H100

BEA LZR Gold-Black BLK-02 H100

Laser scanner for gate and barrier applications.
Provides four laser-based curtains offering a three dimensional detection zone.
Detection curtains are highly configurable and can be set up for activation and presence detection in vehicle sensing applications.
Effective alternative to induction loops.
Max detection range: 32'x32'
Cable length: 33'

.......more details

LZR-H100 User Guide (EN)LZR-H100 Cut Sheet (EN)LZR-H100 User Guide (FR)LZR-H100 Cut Sheet (FR)

10SSTI

BEA Active Infrared Presence Sensor

Active infrared sensor for industrial environments.
Applications: automatic industrial doors gates and automation.
Uses triangulation to detect presence of an object eliminating false detections caused by varying ground conditions.
Can be mounted on stationary or moving objects.
Can be used individually or daisy-chained with up to 8 other modules.
Can be used on narrow and wide doors.

.......more details

S50E-PAIR

LiftMaster Small Profile end kit for one edge only 8.2KOhm resistance

Fast easy to install and cost effective system no glue is required
One end for output wire other end with resistor for monitoring
Compatible with S50 Small Profile Edge
Includes: (1) set enough for one edge
p/n 1804-1463

LDJ-CAP-48MFD

Doorlec Run Capacitor for LDJ RCR50-370

370VAC/B 50 uf 50/60 Hz
CSC run capacitor

DCWALLCTL

LiftMaster Floor Level Wall Controller with LCD Display

Compatible with LiftMaster MAXUM Commercial Door Operators.
4-line LCD display gives you access to more information at all times
Bringing programming troubleshooting and Diagnostics down to the floor level will save you time and money
Menu based user interface allows you to scroll through edit and save options and settings easily.
Dimensions: 3.586” W x 8.166” H x 1.732” D

GALV-234-258-144-L

Galvanized Torsion Spring .234 x 2-5/8" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2-5/8"
Length: 12 ft

PHOTO-065

Manaras Monitored Photoelectric Cells N4X Retro-Reflective 5-50' Range

Monitored NEMA 4X enclosure retro-reflective type photocell
2-Wire
Suited for harsh environments
Range: 5-50 ft

Manual

15-50B22LGH

Sprocket 22 Teeth 1" Bore 1/4" Keyway w/SS

RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
Soft-Starts and Soft-Stops
Electrically activated drum-band type solenoid brake
Ceiling-mounted with 8.69" headroom clearance required below the tracks
Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
Tracks sold separately

.......more details

14-1008

PVC Roll 12" x .120" Standard Smooth 200' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

HSLG-111

Linear Commercial Slide Gate Operator 1 HP 115V 1 Ph - Heater not Included

Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
Integrated warning beeper during gate movement
15 diagnostic LEDs on board for ease of setup and troubleshooting
Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
On-board APeX Controller three-button control station

.......more details

CRBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

4041-LCN

LCN Door Closer *** repl by 4040-XP

1104-10FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 10' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

HA-434TL

SkyLink Wireless Motion Sensor

Supervised Sensor: monitors the sensors and their battery condition automatically
Motion detecting range: 40 feet.
Operating range: Up to 800 feet.
Easy to set up (Battery not included).
FCC/IC approved.
Sensors are weatherproof but not waterproof. Sheltering it from the elements is recommended

.......more details

DECO-FASTNR-HNGE

Decorative Hinge (Carriage-Style) Fastener Black Sold per Screw

Self Taping screw #8 x 1/2" 18-8 Stainless Steel Black Head
Black crinkle head
Ideal for decorative (carriage style) hinges

INTERLOCK005

Interlock Switch for Sectional Doors Rail Mount 1 NC Contact

Mounts on the door track to prevent the use of the operator when the door is locked

150BL

1-1/2" Light Brush Insert 6ft Long

Polypropylene bristles
Box quantity 50 pcs

CP-LX900

Lynx Control Board with Cover for MDJ models

works only on MDJ (medium -Duty Jackshaft) models
UL325 compliant with B2 C2 modes
includes on-board Timer-To-Close
On-Board 372MHz radio receiver accepts 20 remotes

MDJ Installation manual

LRS-LC

EMX Logic Controller

For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
Connects two stand-alone sensors to expand the detection area
Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
Provides six (6) selectable logic functions and two (2) separate relay outputs
A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors

.......more details

19-60ML-SS

Master Link #60 Stainless Steel

For #60 chain

7500-FS-GALV

Fire Shutter Hot-Dipped Galv Interlocking Slats Made-to-Order

Shutters can be up to 13'- 6 inches wide and 12 feet tall with UL labels Class A B or C while still being able to function as normal counter rolling shutters.
Oversized fire shutters can be manufactured up to 20 feet wide
Model 7500 fire shutters can be installed with either a manual lift external motors a hand crank with or without automatic testing tubular models with the option of automatic testing
Along with UL labels that will automatically close the fire shutters for either 3 1½ or ¾ hours the fire shutters can also be manufactured with smoke protection
Available finishes: Hot-dipped galvanized steel with an optional baked-on gray polyester enamel coating or 304 stainless steel with a number 4 finish flat profile
The viscous speed governor can be set to automatically close the fire shutters at speeds of 6 inches per second up to 24 inches per second complying with NFPA 80 specifications.

.......more details

INTERFACE003

Manaras Y-Connect Signal Merging Module

N4 compatible with 2 x monitored entrapment protection devices
Compatible primary devices: PHOTO061/061A/065/070
Secondary devices: monitored photocells light curtains electric sensing edges and/or non-contact sensing edges

Installation manual

GUK-BK

Genie Universal Wireless Keypad 41249R

Works with most major brand garage door openers. Compatible with Genie Intellicode (rolling code) Genie 12 and 9 switch systems going back to 1988.
Also compatible with Overhead Door Chamberlain Craftsman LiftMaster Wayne Dalton Linear Megacode Xtreme Garage Ryobi Sommer and Marantec. •With the Genie Universal Keypad you can control a combination of up to 3 different garage door openers. Each of the 3 openers can be programmed individually of the others so having multiple brands of openers controlled by a single keypad is not a problem.
Powered by two triple-A batteries (AAA)

HYBRID-BLK-16

Residential Side & Top PVC/Aluminum W/S with cap 16' Long (193") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

050DCTBF

LiftMaster Receiver Logic Board Kit DC WiFi Bluetooth Enabled

050DCTB is a Bluetooth Enabled Receiver Logic Board Replacement Kit.
For use with various LiftMaster® and Chamberlain® WiFi® DC Chain Drive and Belt Drive Garage Door Openers; powered by myQ®.
The unit will feature a yellow learn button.
Replaces 050DCTWF
Backwards compatible with 050DCTWF
Board: Tri-band Security+ 2.0l

.......more details

CP-BR-ASSY-115V

Lynx Brake Kit with 115V Solenoid CDJH

Complete brake kit with solenoid

ON4E/A

NICE Apollo Era One 4-Channel Transmitter w/Visor Clip 433 Mhz

Unlock your gate with the new Era One!
A 433.92 MHz rolling code transmitter with management of identity codes and certificates it is self-learning with a built-in proximity receiver.
With 72 bit O-Code encoding it is also compatible with Nice Flor encoding receivers.
If you've ever been frustrated programming remote controls have no fear! By using a transmitter already programmed to the receiver it memorizes the data via an enabling code between the two making programming a simple process
The Era One uses data processing and recognition systems that increase its degree of security delivering a threefold reduction in automation response time. Attach the Era One transmitter to your keys or fix it to your car visor with the included visor clip.
Estimated Range: Outdoors: 656 ft Inside Building: 115 ft

.......more details

Q104

LiftMaster Standard Arm Assembly CSW24U/RSW12U (75-50293)

Also known as: Q038 75-50293 K09-50104 Q040

ACP00922

Nortek LCD Display Assembly AE5/AE1K ***NLA***

Replacement screen only

RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

Installation manual Spec sheet

14-1056

PVC Roll 12" x .120" x 200ft Roll Low Temp Smooth for Replacement Strip Curtain

Clear and smooth. Suitable for most average applications.
Temperature Range: -34° C to 65° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

PREM-SEL-MX-R16

Garex Ready to Install Door Special Order Premium Select MX R16

R16 Insulation - Mix of short and long panels - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - 7' to 9' wide doors will have 1 short and 1 long embossment - 10' to 11' wide doors will have 2 short and 1 long embossment - 12' to 18' wide doors will have 2 short and 2 long embossments - Composite end blocks eliminates corrosion and wood deterioation

A123300SGLPK

LiftMaster Battery w/ Harness Single 33AH 12V

RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)

ALUM-536

Aluminum 24" x 100' Spool Dover Gray / Gris Granite # 536

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 536
Reverse side is #431 Bright White

Colour chart

50060

Doorlec Explosion-Proof Pneumatic Edge Kit

Kit includes explosion-proof air switch air hose plugs coil cord & fittings
Door size needs to be specified when ordering

ATSW

LiftMaster Light-Duty Dual-Rated Trolley Operator

Wi-Fi enabled – completes the LiftMaster Light-Duty product family with Wi-Fi on board
Built-in Wi-Fi enables access to myQ® or myQ Business™
Security+ 2.0®
Dual-sided lighting with light lenses provides superior illumination
Electronic limit setting for easy installation/setup
Compatible with myQ Accessories (827LM Remote LED Light 825LM Remote Light Control 823LM Remote Light Switch 829LM Door Monitor

.......more details

3EBX

Explosion Proof 3-Btn Pushbutton Control Station

Not rated for division or class
Three button O/C/S Nema-7/9
Surface mount
Dimensions: H=6-1/8" x W=3" x D=4-3/8"

CAP378

Capacitor 110/125VAC 378-454MFD

378-454 mF 125 VAC 50/60 Hz
Used on 1/2 HP LiftMaster operators

144B18

LiftMaster Idler Pulley 2" OD 1/2" Bore

144B0018 is a idler pulley (2"OD 1/2"B) replacement kit. Compatible with Models ATS211 & ATS211R garage door openers. Check the manual for your specific model number before ordering.
Also known as: 144B0018 144B18

DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

Fraba DW3S-300 air switch 10008797-2
Normally Open Contact (NOC)
Screw Type Connector
Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
Housing: ABS Switch: PA6V0 Nema4
Normally Closed Contact achieved by adjusting the sensitivity screw

.......more details

Operating Instructions

1004-134-14'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 14 ft**Actual Length 14'2"***

For door thickness 1-3/4"

K002B0799-3

LiftMaster Cam and Lock Kit for EL1SS

Also known as: SNRLOCK 002B0799-3 SN6900110

821LMB-SENSOR

LiftMaster Extra Door Sensor for 821LMB Second Generation *** To Extent Of Inventory

This add-on door sensor works with the MyQ Smart Garage Hub to monitor and control a second garage door opener.
This version of the MyQ door sensor is only compatible with the new MyQ Smart Garage Hub by LiftMaster Model 821LMB.
Installation and Programming is easy: Mount to inside top panel of garage door and add to an existing MyQ account through the MyQ app
Not compatible with MyQ Garage (821LM)

K71-D1PH

LiftMaster Drum Brake Kit 1 Ph 115/230V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable (120V Single Phase) Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

MP-00081

Micanan Double V-Belt Mod. for PRO-J H HHD

Provides added strength to the belt drive system

050DCRJWF

LiftMaster Receiver Logic Board DC. WiFi RJO

Fits: 8500W
Also known as 050DCRJWFMC 50DCRJWFMC

2200-926

Linear Gear Reducer 60:1 Models SWR SWD

TB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

210106

SkyLink Trolley for T-Rails

MX-00016

Micanan TEFC Motor Upgrade Modification

TEFC motor upgrade for 1-phase belt drive operators

TRACK-GUARD-60

Track Guard 60" Tall Safety Yellow With Base Sold as a Pair

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
1/4” foot plate drilled with slotted holes for three 1/2” anchors.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: (right) and (left) sides

.......more details

MOD082

Manaras Hazardous Location Modification

For electromechanical control only
For indoor use in hazardous locations

RADIO-RE102

Manaras Access Radio Receiver Rolling Code 390 MHz

Designed for multiple access communities and commercial buildings.
Compatible with up to 1000 remote controls per receiver.
Compatible with RADIO-EM101 and RADIO-EM103 SD/MD and KEYLESS042.
Each transmitter can be individually added deleted or temporarily disabled.
12-24VDC or 12-24VAC.

Programming instructions Instructions de programmation

CF-101-16

Commercial Side & Top Weather-Strip 16' Long Aluminum / Vinyl

Same as Garaga CF101

CUSTOM-8X40SC100

Devanco Loop 8 x 40 Saw-Cut 100' Lead-In

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation manual Manuel d'installation Loop placement guide Guide de positionnement des boucles

LIMIT-KIT-BCSI

Limit Shaft Kit for BCSI Gate Operator ** Price by Quote Only

ANT-2

Linear 3ft Mid-Range Antenna (SNE00002)

Antenna for Linear’s 27 MHz mid-range transmitters and receivers
Three-foot whip style
18 feet of coax cable included
”U” bolt included for post mounting
Dimensions: 2.25” W x 39” H x 2” D
Same as: SNE00002

.......more details

FD165C

Electric Motor Only 1.5 HP 110V 1Ph 56C Flange

50-HERK2

Hercules Microwave Motion Detector for Industrial Doors

Opens after sensing an object.
Can be set up to detect vehicles separately from people and bring the two signals to two different outputs
Or use the two outputs to differentiate between forward and backward movements
Detection fields are adjustable - manually or with a remote control (sold separately)
Can be mounted between 8.2' up to 23' with max range of 80'
Reference height of 23' and angle of 45 degrees

.......more details

.375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

CHAIN036

Manaras Jackshaft Drive Chain #60 - 1R10'

Includes 1 chain link

02-103L

LiftMaster Push Button Station 3-btn Surface Mount O/C/S Nema 1 with Maintenance Alert LED

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Works with Liftmaster MH commercial operator
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

.......more details

K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

Hall effect assembly for SL540/570/580/575/585 operators with GL Board
Includes: screws flat washers lock washers and replacement instructions
Same as: G74G0487
This part has a short lead-in wire and will not work with SL590 or SL595

M-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details

CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

Shaft Mounted Junior Hoist
4:1 Reduced Drive
Sprocket: 41B36. Bore size: 1-1/4" diameter
Cross Reference: OMI 4020
Requires minimum 3/8" center line offset.
Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

.......more details

Sell sheet

ER294-K

Heddolf Long Range Receiver 433 MHz

Up to 1500ft range
Compatible with EX220-1K

7144.96

Whiting Bottom Aluminum U-Channel For Coldsaver 96" long

Bottom seal sold separately

720118

FAAC Latching Plastic Enclosure

Dimensions: 4.65" x 8.38" x 0.6"

38476R

Genie Master Belt Drive Rail Extension Kit for 8ft Doors

The Genie Master Belt Drive Extension Kit is an extension for C-channel and T-type rails to be used in addition to the 7 ft. (3-piece) rail to accommodate an 8 ft. high door.
The extension kit is designed specifically for Genie belt drive openers.
Belt and instructions included
Compatible Genie SilentMax 1200 SilentMax 1000 QuietLift 800 and BeltLift

ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

Features a slim design that is compatible with most gate operators that require a dry contact relay input.
No harness required; comes with terminal screw adaptor
ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
Frequency count/reset switch
10 sensitivity settings
Loop diagnostics

.......more details

RBH101L5-LH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation manual Manuel d'installation Sell sheet

110550

Allstar MVP 3 Channel 24V 3 Terminal 4 Wire Receiver 318 MHz *** NLA

3 channels 4-wire 3-terminal operator connection
Wire antenna included
Compatible with Allstar Classic Allistar and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683
RF frequency: 318 MHz

.......more details

Programming instructions

DM518-125

Cable Drum Standard Lift 18' D525-216-125 Pair Torque Force

18' standard Lift aluminum die cast alloy.
Pair includes: (1) LH and (1) RH.
Color coded: Red=LH and Black=RH
Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
Max. Cable Diameter: 3/16".
Mounting: 1-1/4" solid shaft with 1/4" keyway

.......more details

TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

Priced per each

CHD200

Chain Hoist Direct Drive Assembly 200 D

Sectional door Direct drive - 1" shaft
Requires keyed shaft
Includes: 2 shaft collars
Fits 3-3/8" min. offset
Includes 26' of chain

29202

Doorlec Transformer 550Vpr 120V sec. 35VA

MK00643

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Field Install

Auxiliary device logic board
Controls red/green lights
Provides Normally Open dry contacts for fully open or close positions
Normally Open dry conatcs for door opening or door closing cycle
Works on circuit boards: MK00641 MK00642 MK00701
Includes installation hardware

.......more details

Instructions Manual

DXT-21

Linear 2-Btn 1-Channel Handheld Transmitter 315 MHz *** Discontinued

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

Installation Manual