Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

  • For models MT BMT MJ mechanical operators
  • Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring
MD00009

Micanan Roller Chain #41 45 Pitch Drive with Link

  • Length: 4 ft
WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

  • Wireless access control keypad
  • Same features as WKP250LM3
  • 5 code capacity - 4-digit codes
  • 2-way design with confirmation beep
  • 900MHz
Programming Instructions
616001404

Rolling Steel 900 Series Guide Channel Sold per Foot

  • Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.
706111011

Rolling Steel 800 Series Guide Channel Sold per Foot

  • Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.
HTRKITRSL

LiftMaster Self-Regulating Heater and Coil for RSL12V ** DISCONTINUED

  • Protects system to -40F.
  • Installs into the operator frame
M005

Rolling Steel Groove Mouth GM6789 Fire Door

H031

Rolling Steel Slide Bolts and Holder Fire Door

4JW-RIGHT

Rolling Steel 3" Curved Cast Windlock 273004 RH

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
4J

Rolling Steel 3" Curved Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
17J

Rolling Steel 2" Flat Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
2KW

Rolling Steel 2" Curved Continuous Windlock *** No Longer Available

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
AC9

Felco C9 Cable Cutter 1/4" Capacity

  • Tool length: 13"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 9mm / 0.35in
    • .......more details
Data sheet
OEB-1

Super Sneaky Operator Extension Bracket

  • Improves installation safety
  • Extends operator rail travel length. Use a 7′ rail for 7’6" – 8′ tall doors
  • Saves extra 2" of headroom required by draw bar type operators
  • Pulls door clear of opening
  • Eliminates garage door overhang
  • Greatly increased installation ease & safety
    • .......more details
2522

Whiting Thrust Washer

  • Used on Whiting balancer assemblies
7549

Whiting Winding Cone for 2-5/8" ID Spring Wire Curbside (RH)

  • A Whiting original
SLT-17E

Rolling Steel 2" Flat Slat Clear Anodized

SLT14-18P

Rolling Steel 3" Flat Slat 18-ga Primed

SLT14-20P

Rolling Steel 3" Flat Slat 20-ga Primed

SLT17-20P

Rolling Steel 2" Flat Slat 20-ga Primed

SLT17-22P

Rolling Steel 2" Flat Slat 22-ga Primed

SLT2-20

Rolling Steel 2" Crowned Slat 20-ga Galvanized

SLT2-22P

Rolling Steel 2" Crowned Slat 22-ga Primed

YSG115-LED

Devanco Stop and Go Light Yellow Housing 115V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
  • Made in Canada
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
LD-11B

EMX Base Socket 11-Pin DIN Rail Mountable Black Block Style

  • For use with D-TEK detectors
  • Special Order Only
  • Narrow profile
12-10715

LiftMaster Flanged Bearing 1" Keyed

348-CUT

Whiting Tongue & Groove Bottom Panel Assembly with Lock 15-1/2" Cut to Custom Size **Quote Only

  • Cut to exact size required ** customer must specify
  • Primer only
342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

  • Standard size panel primer only
5X15SC50

Devanco Loop 5' x 15' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
GH505-L5

LiftMaster Gearhead with Brake 1/2HP 575V 3P L5 ***No Longer Available

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
GH501-L5

LiftMaster Gearhead with Brake 1/2HP 115/230V 1P L5 ***No Longer Available

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
PL-B12-ARM-CURV

Lynx Curved Arm for Proline Operator

  • Used on Proline residential garage door openers
SL532COP

Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST532COP
ST532COP

Copper Stop 5/32" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL532COP
M-VERSION

Manaras Monitored Entrapment Protection Option Upgrade Mont Thru-Beam + N1 Eyes

  • Upgrades added when purchasing a commercial operator
CF-101-8

Commercial Side & Top Weather-Strip 8' Long Aluminum / Vinyl

  • Same as Garaga CF101
RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
RN0034-SS

Roller 3" White Nylon 4-3/4" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles for a 12' door
  • Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
PRO-TB-7511-U

Micanan 3/4HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
MK-00699

Micanan Weatherproof Thru-Beam Photocell 0-45 ft Range

  • This item has been discontinued by the supplier
CH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
Q029

LiftMaster Limit Switch for Elite Gate Operators (K23-50099)

  • Sold individually
  • For Elite Miracle-One arm SL3000 CSW200 and robo slide and robo swing gate operators.
  • Same as part no. K23-50099
MB-02001

Micanan Electric Motor Only 3/4HP 110/220V 1PH

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
.306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
K1D6597-1CC

LiftMaster Control Board with Heat Sink CSL24V & CSL24VH

  • Control board for CSL24V and CSL24VH gate operators
  • 014D1058M
BK311

Jamb bracket J-11 #11 12 gauge

  • Sold by the piece
  • Height 4.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK308

Jamb bracket J-08 #8 12 gauge

  • Sold by the piece
  • Height 4.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK306

Jamb bracket J-06 #6 12 gauge

  • Sold by the piece
  • Height 3.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK305

Jamb bracket J-05 #5 12 gauge

  • Sold by the piece
  • Height 3.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK304

Jamb bracket J-04 #4 12 gauge

  • Sold by the piece
  • Height 3.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK302

Jamb bracket J-02 #2 12 gauge

  • Sold by the piece
  • Height 2.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK303

Jamb bracket J-03 #3 12 gauge

  • Sold by the piece
  • Height 2.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
69C

Skylink 1-Button Universal Keychain Remote *** No Longer Available

  • It's small enough to carry in your pocket or purse
  • The 69C is a great universal remote and it is compatible with almost any garage door up to 2007 (see compatibility chart for exact brand names).
  • It has just one simple button and a unique keychain attachment which makes it ideal for use with convertibles motorcycles bicycles or any other vehicle without the usual sun visor.
  • It connects to your garage door using a series of DIP switches making it simple to program it even if your garage door dates as far back as the 1980s.
  • Model 69c is not compatible with Stanley "Securecode"
  • Compatible frequency: 390/318/315/310 Mhz
    • .......more details
Compatibility Chart
MQ00012

Micanan Adjustable Cable Stopper Gold C/W Set Screw Sold per piece

  • Used on all Micanan waterproof and corrosion proof units that have brakes as well as all explosion proof units.
  • Comes with set screw 3/16” x ¼”
SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

  • Actual length is approx. 12'-1"
1110197

LiftMaster Take Up Bolt 3/8"-16

  • Measures 3-15/16" Long
  • Also known as: G115015 1110197 115015 11-10197
19-5814-NP

LiftMaster Trolley Chain Pack #48 for 14ft Door Nickel Plated

  • Chain pack only
SEL2641R433-IP5

Erone 2-Relay Stand Alone Receiver Up to 500 Users 433MHz

  • 2 transmitter keys per user
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • 12/24V AC/DC
Wireless System Chart
8002-7FT

Side Weatherstrip with Black Rubber Bulb for Pedestrian Door 7ft Long

  • Aluminum and Black Rubber
  • Comes in 7ft lengths
86-RP08-108

LiftMaster Roll Pin Long 1/4" x 1-1/8" Coiled 10/Pkg (K-SPLONG)

  • Same as K-SPLONG
86-RP08-102

LiftMaster Roll Pin Short 1/4"x 1-1/2 Coiled 10/Pkg (K-SPSHORT)

  • Same as K-SPSHORT
MGR20-Y-2U-06

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 6ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Installation ManualSell Sheet
MODKIT074

Manaras Hand Crank Field Modification Kit

  • For in-field upgrade on OGH and MGH operators
Installation Manual
37407

Doorlec Reversing Contactor BF9 24VAC

CBB332

Stop & Sleeve 3/32" 100 pair

  • Includes 100 stops and 100 oval sleeves
T753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 ***No Longer Available

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Installation ManualManuel d'InstallationSell sheetBrochure
17-10165

LiftMaster Pulley 7"

12-10331

Flanged Bearing 3/4" x 1-1/2" x 1/8"

LEVER007

Manaras Disconnect Lever for old MJH

  • Works on model MJH - old units
K1D7545CC

LiftMaster Control Board Assembly for LA500 ** To Extent of Inventory

  • 014D1065G
VBELT_5L345

Doorlec VBelt 5L 34.5" *** Replaced by VBELT_5L350

  • Same as part number #19052
K76-36398

LiftMaster Electric Motor 1/2HP 24VDC for CSL24V / CSW24V

  • Replacement motor with improved brush assembly for CSL24V and CSW24V gate operators
1005-2-10'

Aluminum Bottom Retainer U-Shaped 10' Long**Actual Length 10'1"***

  • For door thickness 2"
SLEDB-110V-AMB

Strobe Light Amber 110V Permanent Mount *** No Longer Available

  • 88 flashes per minute
1005-1-3/4-8'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
Z9220

Pocket Style Res / Com Combo Spring Gauge

  • Includes wire sizes .1875 thru .5
  • Double saw-tooth leaves for easy wire measuring
  • Stainless steel
  • Includes belt sheath
V1104-WHITE

Replacement Vinyl Only for 1104-White 200ft Roll

  • Sold in 200 ft rolls only
18004B

Genie Motor Start Capacitor 220VAC 50-60 MFD

  • Compatible with most 1/3 HP Genie & Overhead operators
1044622-REFURB

FAAC 400 Hydraulic Swing Gate Operator 115V Reburbished

  • Refurbished unit.
  • Tank body
27175B

Genie Carriage Slide Only

  • Carriage NOT included. Carriage part number 20462R
  • Compatible with Genie GPS and PMX belt drive models
Z9200

Cable Snubbers Sold as a Pair

  • Prevents slack from forming in cables
  • Sold in pairs
Installation Instructions
9150000629

3/16" Stops ONLY 100/pkg

  • Stops only 100 per pack
36254R

Genie T-Rail Carriage Assembly

  • This part is listed under several part numbers: 36254R.S 36197A 21784R 20438R
  • For all chain drive openers with steel T-rail assemblies
  • Must be installed with inner slide part # 25605R
34516R

Genie Chain Glide Inner Slide ML Series with Magnet

  • For ML Series with Magnet: 350ML 500ML 700ML 800ML
375UT

LiftMaster Universal 2-btn Transmitter Next Generation

  • Dual frequency universal transmitter
  • Will activate 2 different types of openers (1 on each button)
  • Compatible with major brands except Marantec & Hormann
  • Visor clip and battery CR2032 included
Programming InstructionsInstructions de programmationSell Sheet
TCR-1

Tri-Code Receiver Single Channel ** DISCONTINUED

  • Single channel receiver compatible with Linear Delta Multi-Code and Stanley radios
  • Three position direct connect tabs for commercial and residential garage door openers
Programming Instructions
7001-9-W/B

Commercial Side & Top Weather-Strip 9' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
803

Fasteners Sleeve Anchor 3/8" x 3" 50/Box

  • Secure anchoring into concrete brick or block
MOD021A

Manaras Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
BRACKET112

Manaras Wall Mount Stud Bracket

  • This Wall Mount Bracket can be used with all Manaras Wall Mount commercial operators except the MRGH and MGH models
  • Will not work will Trolley Operators
MX00140-110-OLD

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Inside - Old Model

K204C0211

LiftMaster Torroid Transformer

  • Transformer replacement kit for use with various LiftMaster® Commercial Slide and Swing Gate Operators
19-5114

LiftMaster Trolley Chain Pack #41 for 14ft Door

  • For 3/4 & 1 HP trolley operators
19-41047

LiftMaster Roller Chain #41 47 Pitch w/Link

  • For model T operators
  • Approx. 2-3 ft
735

Fasteners Flat Washer 3/8" USS Zinc 1000/Box

  • ID: 0.40625’’
  • OD: 0.8125’’
  • THK: 0.066’’
37301R

Genie C-Channel Chain Extension Kit

  • The extension kit for C-channel chain drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door
MOUNTSHAFT018F

Manaras Limit Shaft Kit for MTH MTBH MJH MSJ

  • Limit Shaft Kit for OLD STYLE MTBH/MJH/MSJ Operators
  • 5/8 - 24 10" limit shaft
  • For MSJ built before 2012 (green control box)
Drawing