Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-H-7521-U-LH

Micanan 3/4HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5023-U-LH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

821LMB-SENSOR

LiftMaster Extra Door Sensor for 821LMB Second Generation *** To Extent Of Inventory

This add-on door sensor works with the MyQ Smart Garage Hub to monitor and control a second garage door opener.
This version of the MyQ door sensor is only compatible with the new MyQ Smart Garage Hub by LiftMaster Model 821LMB.
Installation and Programming is easy: Mount to inside top panel of garage door and add to an existing MyQ account through the MyQ app
Not compatible with MyQ Garage (821LM)

MDT-1B

Linear 1-Channel Visor Transmitter MegaCode Block Coded 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Unique ”Extra” top button
High visibility operate LED
Visor clip included
Sold in lots of 10

.......more details

Programming instructions

MW-00020

Micanan Splash Proof Cover Fully Assembled T TB SD

Splash proof cover for models: PRO-T/TB
Same as MP00251

MK-00300

Micanan Time Delay on Reverse 0.5 sec. 24/110V

In closing cycle door will stop for 0.5 seconds and reverse to fully open

TN33C

Wire Nuts (Marrette) Yellow 22-10 AWG 100/Pkg

Screw-on wire connector
Wire Range: 22-10 AWG
Rating: 105C (221F)
Voltage: 600V
Approval: CSA UL 486C Listed

MK-00785

Micanan 3-btn O/C/S Nema-7/9 Pushbutton Control Station

Surface mount
Killark

MV-00003

Micanan 3-btn O/C/S Nema-1 Pushbutton Control Station

Surface mount

RBH103L5-LH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

111075.0001

Overhead Door Poly VBelt for RSX and RMX Jackshaft/Hoist Commercial Operators

Serpentine belt compatible with Overhead Door standard duty RSX and RMX operators.
6-rib poly VBelt
31"

RBH103L5-RH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

.437-334-L

Cut-to-Length Torsion Spring .437 x 3-3/4" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.406-514-L

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

PRO-J-7553-U-LH

Micanan 3/4HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-7583-U-RH

Micanan 3/4HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

ME117-C7

Miller Edge PVC Mounting Channel Sold by the Foot

PRO-J-5023-U-RH

Micanan 1/2HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-LJ-5021-U-LH

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Left Hand

On-Board receiver holds up to 20 transmitters

PRO-GT-10081-U

Micanan 1HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

ALUM-265

Aluminum 24" x 100' Spool Antique Brown / Brun Antique # 265

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 265
White #431 on reverse side

Colour chart

ALUM-507

Aluminum 24" x 100' Spool Tan / Tan # 507

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 507
Reverse side is #431 Bright White

Colour chart

PRO-APTB-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-APT-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5083-U

Micanan 1/2HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

60-7248-SC6

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) SC-6 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Excellent Surface Grip on Tire and Ground
Lightweight Aluminum
Size: 6" wide x 6-1/2" long x 6" high

WC-5810

Wheel Chock WC-5810 Pyramid Rubber with U Hook

Solid Rubber Construction
Hook for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 10" long x 5" high

IC-10

Wheel Chock IC-10 Ice Formed Steel Tooth Grip

"Tooth" Like Bottom Grips Icy/Slippery Ground Surface
Powder Coated Yellow for High Visibility
Formed Stee]l
Size: 8" wide x10-1/2" long x 9-1/4" high

SPA-6606-01

Gear Wheel Nylon Sold in Pairs

Dynaco Gear Wheel for Rapid Roll Door
Sold in Pairs

RBH503L5-LH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

M-30

Molded Rubber Bumper Black 30" L x 10" W 4" Projection 3-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
30" L x 10" W 4" Projection

.......more details

LB1010-36

Laminated Bumper Standard Black 10" x 36" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB920-11

Laminated Bumper Black 9" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB436-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TB406-24SF

Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

8010

LiftMaster DC Chain / Cable Drive Garage Door Opener ***Discontinued***

Customized DC Motor with soft start/stop action.
Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
Security+2.0 increases remote control range and reduces interference for consistent operation.
PosiLock® electronically protects against forced openings.
The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)

.......more details

LVB630-11

Laminated Bumper Black 6" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-24

Laminated Bumper Standard Black 12" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft ** price by quote only

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

PRO-GHCB-20053

Micanan 2 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manual Specification sheet

HINGE-411-PCG

Powdercoated Hinge #4 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #4 - 0.74 lbs
Powdercoated Grey
For use with 7/16" stem rollers

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels are routed and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.

.......more details

R4

Erone Radium 4-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

Wireless System Chart

K10-36183

LiftMaster Battery Tray for 33AH Batteries

For use with LA500

8500W

LiftMaster Res. Jackshaft BBU Garage Door Opener Wi-Fi ***No Longer Available

Built-in Wi-Fi for the easiest way to connect the garage.
MyQ mobile app lets users receive alerts and control the opener from anywhere.
MyQ Remote LED light can be placed anywhere to provide bright maintenance-free illumination.
Wall-mount design and quiet DC motor eliminate noise and vibrations through the ceiling and provides smooth operation.
Heavy-lifting power operates doors up to 850 lbs.
Integrated battery backup ensures access even when the power’s out and will open and close the door twice a day for 5 days

.......more details

Installation manual Manuel d'installation Sell sheet Brochure Product guide

LA500-1PKG-XLMU

LiftMaster Residential / Light Comm. DC Swing Gate Op. Extra Large Control Box UL325 (Includes LA500CONTXLMUL (K74-39309-1) LA500DC (2x) 29-NP712 LMRRUL)

LA5001PKGXLMU replaces model LA5001PKGXLMDC
Updated unit complies with new UL325 code revised Jan 2016
System now requires monitored secondary entrapment devices unit will include LMRRU safety photo eye
Includes one LA500 arm XL control box receiver unit and photo eye and 2 -7amp batteries
Residential arm style swing gate operator with Extra Large control box and battery backup system
Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.

.......more details

276554

Overhead Door Ribbed Air Tubing 1" Sold by the Foot

Rubber tubing

K74-18346

LiftMaster Limit Shaft Kit

Compatible with LiftMaster® Model GH 5HP Commercial Door Operators

ALUM-5P3

Aluminum 24" x 100' Spool Espresso # 5P3

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P3
Reverse side is #431 Bright White

Colour chart

MD00001

Micanan Bevel Gear 20 Tooth 3/4" ID

Comes with keyway and 2 set screws
Used on PRO-GHCW

MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

Used on PRO-GHC
4 required per operator

MOD060-12FT-MAX

Manaras Auxiliary Trolley #41 Chain Modification Only

Provides drawbar operation of a standard lift door with the use of a jackshaft operator
Includes tracks for doors up to 12' high. Additional fee for over 12'
Maximum door width 22'

27089A

Genie Washer

Drive shaft washer for PMX500

MM00024

Micanan Cam Plate for PRO-HHD

MK-00519

Micanan Surface Mount Fused Disconnect Modification

Mounted to control panel cover in lieu of primary fuse block inside panel

PRO-HHD-5053U-RH

Micanan 1/2HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1/2 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN) Specification Sheet

50183

Doorlec Brake Assembly 575V

Brake assembly consists of solenoid drum shoes plate spring cover and fasteners
For all V-belt driven models that have brakes

XRS-02

Rodent Shield 2 x 8" x 1" Strips Peel and Stick Sold in Pairs

Prevents damage to garage door side seals due to gnawing rodents
Made of high quality stainless steel so it will not rust
Invisible from the exterior. Installs on the inside of weather strip - no painting or covering is required.
Easy installation. No tools required just peel and stick
An inexpensive solution to a common rodent problem around households
One size fits all. No need to measure or trim

.......more details

AQ201-NB

Linear GTO Narrow Band Receiver w/Antenna and 10ft Cable

Works with all GTO DC gate operators and narrow band transmitters (gray style).
The AQ201-NB comes standard with all DC slide gate operators.
Measures: 2"H x 2-3/8"W x 15/16"D

PRO-T-5011-R

Micanan 1/2HP 115V 1P Trolley Operator - Contactor

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models

38415A

Genie Chain Drive Sprocket

For Genie & Overhead Door Models
This is a 8-tooth sprocket with a hex drive bore
Genie Brand Models: Relia-G 600 Relia-G 800 1024 2024 QuietLift-600 QuiteLift-800 1042 2042 ChainLift-800 ChainLift-600
Overhead Door Brand Models With CHAIN DRIVE: Legacy 800 2026 Standard Drive 1026

WEL-200

EMX Wireless Edge Link Transmitter / Receiver Kit (4012-2)

Provides a complete wireless solution for interfacing sensing edges with gate and door operators
The Wireless Edge Link eliminates the wiring between the safety edge and operator control box
No wiring needed reduces installation cost
Compatible with NC 10K and pulse monitored outputs
Operates two years on two AA lithium batteries
Connect up to 4 safety edge transmitters

.......more details

Manual

Q092

LiftMaster Rubber Isolator Kit 2 Required Per Operator K75-50150

Elite rubber isolator for the HCT (Hercules).

41A5658-1

LiftMaster Dual Gear & Sprocket Assembly

This complete kit is compatible with 3/4HP LiftMaster® Models 8587/8587W; and various dual AC chain drive garage door openers.
Kit includes: helical gear and top hat assembly worm gear wear bushings grease and hardware needed to replace the chain drive gears.

MT21-GRAY-RH

Miller Edge 2-Wire Pressure Sensitive Edge Gray Right Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual

CHK-991

Chain Hoist Keeper

Chain hoist keeper is not the same as the chain keeper

ANGLE-13G

Perforated Angle 1-1/4" x 1-1/4" x 10 ft 13 g Orange

10 pieces of 10ft per bundle.

PROBE-150

EMX CARSENSE-101 Direct Burial Probe with 150' Lead Wire

Wand only
Requires CS101 (Carsense-101)

7001-18-BRONZE

Commercial Side & Top Weather-Strip 18' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

SPECIAL-ORDER

Special Order Item

PRO-HBH10053U-L

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

26CW94222-CUT

Truck Door Bottom Panel with Hardware (12" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer

.......more details

SPECIAL-ORDER-SS

Special Order for Stainless Steel Door Products

MU22-2WIRE-U-GRY

Miller Edge MU22 2-Wire Universal Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

50-ALMARM-DOT

LiftMaster 15 ft Aluminum Barrier Arm Square White Aluminum with Red/White Retro-Reflective DOT Tape

Used on BG770
Arm adaptor included
15' x 2.5" square arm
Replaces 50ALUMARM

K75-19977

LiftMaster Disconnect Kit Model J SL575

10FT-CHAIN-LDO

Linear 10ft Chain T- Rail for LD050/LS050/LDCO (HCT10C)

10ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned

MX00034-208V

Micanan Brake Assembly for PRO-HHD with 208V Solenoid (MX00206-208)

Complete brake assembly including 208V solenoid - solenoid cover sold separately part #MM00011

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

MK-00660

Micanan 1 Channel Hand Held Transmitter (for APT applications) Sold Individually

Sold in packs of 10. Priced per transmitter

OES-5104

LiftMaster 2" x 2" PVC Channel 16ft

Connects the door to the edge kit. 16' total (sectional doors only).

020C98290

W-Style PolyTrak Complete Replacement Door White Stainless Steel Pkg 020C98290

Complete replacement door is fully assembled maunfactured to exact size includes tracks operator assembly and side seals
Engineered polymer roll-up door
Galvanized steel reinforcement channels
Unaffected by heat and cold: -92F and +158F (-69C to 70C)
Panels never need painting color is molded in
White is standard but available in grey yellow or red.

.......more details

25-10109

Truck Door 1" Steel Roller 5" Shaft Length for Todco Roll-Up Doors ** NLA

Zinc plated Hardened shaft and raceways
Seven roller ball design

SHAFT116

Manaras Input Shaft for OSH

50195

Doorlec Front Idler Assembly with Shaft Trolley Models

Fits all Doorlec commercial trolley operators
Same as # 50190

27-24417

Truck Door Dual Torsion Spring Assembly 96/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 96" Spring Length: 35" Wire diameter: .187 Winding cone color: White

27191A

Genie Opener Sprocket 10 Tooth

10 Tooth Sprocket.
For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

.......more details

PRO-H-5011U-LH

Micanan 1/2HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

SEF2410

Erone Ultra Flat Infrared Photocell 10M (33ft)

Fixed orientation 1 sender and 1 receiver
Range 10M (33ft) in all conditions
Adjustable Sensitivity
1 "NO" and "NC" contact
Power supply 12/24 Vac/dc
Will work with all commercial operators

.......more details

Wireless System Chart

.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

K1A6426-2

LiftMaster Control Board for RSL12V / RSW12V ** USE K001A6426-2

28-30080

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" CurbSide (RH)

Galvanized steel 14 gauge construction
For use with 1" diameter rollers
6" radius for smooth door operation
Track coupler used for proper alignment at track joints

PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters