Devanco Canada - Get The Right Garage Door Opener‎ and Parts

02-103

Push Button Station 3-btn Surface Mount Metal Housing

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

PTM-24V

EMX 7 Day Programmable Timer 24V

The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
With up to 16 ON/OFF events per day and 15 different daily options.
Its DIN rail mount design and wide power supply options (12 or 24 Volt) make installation easy.
The battery backup saves stored programs in the case of power loss.
Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.

.......more details

Instruction manual Spec sheet Comparison guide

E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-NR-1

Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
Easy to wire terminal strip
Plug-in replaceable outputs
Range: 40ft
Power: 24-240V AC/DC
The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.

.......more details

Wiring Diagrams Sell sheet

LOOPDETLM

LiftMaster plug-in loop detector

Plug-in Loop detector for CSW24V CSL24V AND LA500
Includes diagnostic and test feature
12VDC/3mA power draw
For exit interrupt or shadow loop applications
Activates only when a vehicle passes over a loop
8 sensitivity levels plus boost to ensure that vehicles are easily identified

.......more details

Installation Manual

YSG12-24LED

Devanco Stop and Go Light Yellow Housing 12-24V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied

.......more details

Installation Instructions Instructions d'installation Sell Sheet

BEA-10-FALCN-XL

BEA Falcon-XL Motion Detector Mount under 11'5"

Same features as the Falcon detector but made specifically for extra low mounting
Mounting height between 6.5' and 11.5'
Detection zone: 13'x6.5' at 8 1/5'
Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor.
Sensor also has the ability to differentiate between pedstrians and vehicles.
Available remote makes it easy to make adjustments to all key parameters of the sensor while at ground level.

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

ER4

Carlo Gavazzi Reflector 3-1/4" (84mm) Round

Can be used with the PMP12RI retro-reflective detector
Can be used with the reflector hood
Dimensions: 84 mm wide 7.4 mm thick

IS40

BEA Industrial Sensor Dual Technology Presence Detection BEA-10IS40

Dual technology sensor combining presence and motion detection in industrial applications.
Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
Up to 7 minimum object targets
Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
Mounting height: 8'-16'
NEMA 4

.......more details

Installation manual Sell sheet Cut sheet

LMRRUL

LiftMaster Monitored Retro Reflective Photo Eye w/Heater 2018 UL325

Features integrated diagnostics with our 2018 UL® 325 Gate Operators.
Versatile Solution for entrapment protection.
Long-Range Sensing Distance of up to 50 ft. (LMRRUL)
Built-In Heater for dependable performance in most environments.
Increased Beam Angle for simple reliable alignment.
Versatile Gimble Bracket for fine alignment and adjustability.

.......more details

Installation manual Manuel d'installation Sell sheet

OPE-S-1002

Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

Exterior Through-Beam Photocell
Sensing Distance 45 Feet
UL325/2010 Recognized Component
Comes with Sender Receiver and Brackets
NEMA 4 & 4X

Sellsheet Installation Manual

50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

Nema 4
3-wire air switch; 1-NO and 1-NC contact
Mosley
NO contact on Yellow and Green

RP-3002

Rubber Plug 1/2"

To plug end of 3002 gum hose

LA412XL20W

LiftMaster Single Arm Solar Package for LA412DC XL Gate Operator UL325 ***Includes (1x) K94-37236 Solar Harness (1x) SP20W12V Solar Panel (1x) LMRRUL Photo Eye (1x) A12330SGLPK Battery (12V) (1x) LA412DC Actuator Arm (1x) XLSOLARCONTUL Control Box

Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio.
Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications.
Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
Gate Size rated for gates up to 16 ft. in length or weighing up to 850 lbs.
Includes: Single arm control box solar harness kit solar panel kit 12V 20W LMRRU photoeye and battery 12V 33 Ah.
Item codes: XLSOLARCONTUL SP20W12V LMRRUL LA412DC K94-37236 A12330SGLPK

.......more details

IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
Thru beam configuration
UL325 compliant
Four (4) monitoring interfaces
115 ft. operating range
Easy installation and set-up

.......more details

Manual Sell Sheet

IRB-RET2-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X W/Reflector Hood New UL325

Universal UL325 Retroreflective Photoeye Kit
Compact design
Easy LED alignment
Easy-to-Adjust Ball & Socket Bracket
Rugged NEMA 4X enclosure
Integrated sensor hood improved reflector hood and ball & socket bracket

.......more details

Manual IRBRET2 Spec Sheet IRBRET2

NIR-KIT

Emx Industries Retro Reflective Photoeye Sensor with Reflector and Hood (5200-K)

Watertight packaging
Detection range: 30 feet
6 foot cord
Reflector Hood Bracket and mounting hardware Included
2 LED indicators
Sensitivity adjustment

.......more details

LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
Backwards compatible with CS303 sensors

BPE-50

EMX Industries Battery Powered Through-Beam Photocells EMX-1500-1

Thru beam configuration
90° adjustment left or right
The transmitter and receiver use 12-24 VDC/AC but the BPE-50 can also be powered by two 3.6-volt lithium batteries (Batteries Included)
50 ft. operating range
Size: 4.4" (112mm) x 2.05" (52mm) x 1.3" (33mm)

ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

Features a slim design that is compatible with most gate operators that require a dry contact relay input.
No harness required; comes with terminal screw adaptor
ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
Frequency count/reset switch
10 sensitivity settings
Loop diagnostics

.......more details