Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card (factory installed)
  • 16 transmitters maximun per receiver.
  • Use part # RADIO-KIT004 when adding or replacing on-site.
  • This is now standard equipment on all Circuit board operators
Specification Sheet
RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
  • Maximum 50 transmitters per receiver.
  • Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD
Specification Sheet
SPREADER001

Chain Tensioner for 1" shafts

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
RADIO-EM103SD

Manaras 3-btn transmitter configured as O/C/S 1 door Rolling Code 390 MHz

  • Open/Close/Stop remote for 1 door
  • Operates single door: O/C/S configuration
  • LED indicator CR2032 battery and visor clip included
  • Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
Manual
RADIO-EM103MD

Manaras 3-btn transmitter configured as 3x single-btn Multiple Doors Rolling Code 390 MHz

  • Open/Close remote for 3 doors
  • LED indicator CR2032 battery and visor clip included
  • Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
Manual
RADIO-EM101

Manaras 1-btn 1-door Rolling Code transmitter 390 MHz

  • 2 operating sequences available: open/close or single button control.
  • Single button control allows the user the possibility to open stop or close the door by using the one button.
  • Comes with LED indicator CR2032 battery and visor clip.
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 1 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
  • Replaced by RADIO-RE900A
    • .......more details
Programming Instructions - ECBProgramming Instructions - CONT
RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

  • Open/Close/Stop remote for 32 doors.
  • By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
  • Comes with LED battery life indicator and 9V battery.
  • Can be wall or post mounted.
  • Must be used with 32 MCR series receivers.
Programming Instructions
CABLE-15

Manaras 15ft coax cable extension with BNC connectors

  • Used on Radio-15 to extend antenna
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions