Devanco Canada - Get The Right Garage Door Opener‎ and Parts

1003-2-10'

Aluminum Bottom Retainer L-Shaped 10' Long

For 2" thick doors.

MOD034

Manaras Monitored Photocell Upgrade N1 to N4

Ideal for industrial environments submersible and impact resistant.
Flexible design withstands and realigns after mechanical impact.
Max. range 45ft.
Incl. photoeyes 3ft of conductor wire and mounting hardware.
Applies to all operator models with electronic control "M" types.

2807.192.340

Whiting .192 x 2-3/16 x 34" Curbside with Cones

DL-4000-8

Dock Leveler Retainer Galv. Steel Weldable 8' Long

Weldable to sides of dock leveler
Use with 4007 aluminum retainer & light brush (not included).
Vinyl insert slides into this outer retainer.

IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

Two sets of screws are required for each bracket installed

OSH-6234-ECB

Manaras Opera-SH 1 HP 208V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

.218-2-R-C

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

95LMC

LiftMaster Keyless Entry Transformer

2-wire hook up
110VAC Input 22 VDC 2-Wire Connection

Z9006

Shaft Key Stainless Steel Straight 3" x 1/4"

3" Straight Key
Stainless Steel

PRO-J-10081-U-LH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

19054

Doorlec VBelt 5L380

works on model SWGO

K76-35664

LiftMaster RPM Module

7001-9-BLACK

Commercial Side & Top Weather-Strip 9' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.

71-B575

LiftMaster Interior Mount Brake Assembly 575V

Instruction Manual

CP-NCAM

Lynx Limit Cam 5/8-24 Travelling

Limit cam / limit nut

LB412-14SF

Steel Faced Laminated Bumper Black 12" x 14" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

OHJ-6114-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 120V 1 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

2234.396

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with seal and retainer *** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

8010-3FT

Bottom Sweep for Entrance Door White ** No Longer Available

Height adjustable
Vinyl: White
Length: 3 ft

50680

Doorlec Clutch Assembly for LJH

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

Chain pack only

SF258

Spring Fitting 2-5/8" Pair

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .3310".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
Winding bar hole 1/2"

.......more details

UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

Grey cast iron painted.
Comes with 2x set-screws
Football style 2 bolt

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

6" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

26CW94525-CUT

Truck Door Intermediate Panel (15" x Cut-to-Size) Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

Installation manual Sell sheet

27-20308

Truck Door Balancer Bracket End - Curbside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2523 for #2376 balancer

276554

Overhead Door Ribbed Air Tubing 1" Sold by the Foot

Rubber tubing

MD-00252

Micanan Connecting Link #50

SOLID_SHAFT_14'

Solid Shaft 1" Keyed 14 ft Galvanized

Actual length is approx. 14'-1"

H12G06-SS

Hinge #6 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

GAREX-PVC-W-20

Residential Side & Top PVC Weather-Strip with cap 20' Long (241") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
For use with 1" diameter rollers

RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation manual Manuel d'installation Sell sheet

342.115

Whiting Intermediate Panel Tongue & Groove 11-1/2" x 96" Price on Request

Standard size panel primer only

.273-2-5/8-RH-C

Torsion Spring .273 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .273 ID: 2-5/8" Length: 12 ft

.319-3-3/4-RH-C

Torsion Spring .319 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .319 ID: 3-3/4" Length: 12 ft

Z9955

Spring Gauge

Ruler style spring gauge
Stainless steel
Confirms spring ID & wire size
Place formed end between 2 coils count 20 coils to obtain wire size

21-35077

LiftMaster Transformer 575V 24V 40VA

575V PRIMARY 24V SECONDARY 40VA
Same as K21-35077

PRO-J-10023-U-LH

Micanan 1HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-GH-10083U-R

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

R5114

Shaft Bearing 1-1/4" Machined 900LBS

Standard press-in bearing no retainer
Rated for 900 lbs

GALV-319-6-L

Cut-to-Length Torsion Spring .319 x 6" Left Hand Galvanized Blue/Green

Spring wire only. Cones and Filler extra

GALV-319-6-144-L

Torsion Spring .319 x 6" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

24040

Doorlec Roller Chain #40 Sold per Ft

AIRSWITCH018

Exterior Air Switch SPDT ABS Housing

SPR40B48X1

Sprocket 40B48 1" Bore 1/4" KW 2SS

48 tooth sprocket for #40 chain

LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

MSJ-6534-M-N1-RH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

.......more details

LB610-102

Laminated Bumper Standard Black 102" x 10" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H

E/1929/236

Automatic Systems Rod Assbly w/2 Rod Ends (BL229)

Used on the BL229 gate op.

P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

Allstar compatible
Three channel transmitter
8 dipswitches 318 MHz

TS-1-207-GALV-KEY

Tube Shaft 1" x 207 (17'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-168-GALV-KEY

Tube Shaft 1" x 168 (14'.0) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-159-GALV-KEY

Tube Shaft 1" x 159 (13'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

TS-1-129-GALV-KEY

Tube Shaft 1" x 129 (10'.75) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

15-50B72LGH

Sprocket 72 Teeth 1" Bore 1/4" Keyway w/SS

Same as 71-1550b72LGH

15-50B50LGH

Sprocket 50 Teeth 1" Bore 1/4" Keyway w/SS

Same as 71-1550B50LGH

RDRG63.3.1-1:1/2

Maximum Output Torque Generated Chain Hoist Rolling Door w/4B60HD-1:1/2K3/8-2S5/16SQ ** Spec Order

TRACK-SET-2LHR-F

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion Front

Complete set - torsion front

KW011

Keystock 3/16 x 1"

Sold per piece

HTUS-DOUBLE

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Double Slot

Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
Universal Design
Adjustable from 2"-3-1/2"
Double Slot
Fits Most Overhead Sectional Doors
Priced Per Each

.......more details

GAREX-24X12-GLASS

Garex Thermo Window Clear 24" x 12" Glass Only

An original Garex glass No frame

GAREX-24X12-CBRN

Garex Thermo Window Clear 24" x 12" Commercial Brown Frame

An original Garex window
Fits 1-3/4" thick door R16

GAREX-24X12-WHTE

Garex Thermo Window Clear 24" x 12" White Frame

An original Garex window
Fits 1-3/4" thick door R16

H11G06-SS

Hinge #6 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H11G02-SS

Hinge #2 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

K41-0243-000

LiftMaster Output Sprocket IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators

WHITING-COLDSVR

Whiting Cold Saver Panel Special Order- Made to Measure Quote Only

Special Order Sold by Quote Only

IP-MDSF

CDVI Point of Entry Exterior Multi-Tenant Flush Mount Video Intercom System

Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
IP54 (recommended to be put under a canopy or covering)
Operating temperature: -10C to 50C
Stainless steel panel

.......more details

TDC41-10

LiftMaster Trolley Chain Pack #41 1200/2200LBS 10ft Door

Chain pack only
TDC41-10 is a #41 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 10' commercial doors

MD00027

Micanan Disconnect Coupling 3/4" ID PRO-J/LJ

Sold individually

OGH-6232-M-N1-RH

Manaras 1/2 HP 208V 3Ph Gear Head Operator w/Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

8071-080

DoorKing MicroPlus 3-btn Rolling Code Transmitter

Keychain style remote
Black
Not compatible with HomeLink
Dimensions: 2.5 x 1.5 x .5 inches

OGH-6535-M-N1-LH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

BEA-35-1242

BEA 30' Harness 8-Conductor LZR

Power cable LZR-I100

OGH-6214-M-N1-RH

Manaras 1 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

20102

Doorlec Reversing Spring

D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

Power Supply: 12-24 Volts AC/DC
Current Consumption: < 9 mA
Operating Temp: -40°F to 180°F
Surge Protection: Zener Diode /MOV
Output Relays (2): 1Amp 30 VDC
Loop Input: Transformer isolation lightning and transient protection (1)

.......more details

Manual - LP-D-TEK Spec Sheet - LP-D-TEK

MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
For use with specific Torque Force chain hoists ie 200R (244687)
This chain will NOT work in the hoists that use the 30.7-19-5 chain
works with Micanan / Nice Commercial operators

K41-0409-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Trolley

For Maxum Trolley 1200 Op

K41-0377-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 700)

Maxum T-700

BEARING048

Manaras Flange 2-Bolt Flange Bearing ID 3/4" Black

Replaces BEARING044

K41-0253-000

LiftMaster Electric Motor INSL24UL

Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators

RGH-6214-MON-RH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

Rapido version of model OGH
Includes PHOTO-061 Monitored N4X Thru-Beam eyes

PRO-SD-10081-U-RH

Micanan 1 HP 208V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

OTBH-6533-M-N1

Manaras Trolley Operator 3/4 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain