Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
HAE00058

Linear LDCO Encoder Board

DHJ751L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Right Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
BEARING007

Manaras Flange Bearing ID 1"

  • Flange bearing for 1" shaft
10-8055

LiftMaster Counterweight Clamp for BG790

  • Also known as: G108055
041-0180-000

LiftMaster Wiring Harness Camera/LED Pod Dual Lens

  • This replacement kit is compatible with the follwoing models: 84501 84602 85702 85702 87504 87802 B4603T B4603TC B6713T B6713TCH B6753T B6753TCH
2376.162_20.780

Whiting Torsion assembly .162 wire size 20" spring length 78" shaft

2807.171.250

Whiting Spring Assby .171 x 2-3/16 x 25" L Curbside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 25" Long
  • For Roadside order part # 2806.171.250
SPRAY-523

Aluminum Touch Up Spray Paint 350g Slate / Charbon #523

  • 350g
OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
  • Includes PHOTO-070
    • .......more details
GH303L5-RH

LiftMaster Gearhead with Brake 3 HP 208/230/460V 3-Phase Logic 5

  • Includes CPS-U photoeyes
OSH-6532-M-N1-RH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
80352.4200

Todco Nut Hex 1/4"-20 PLTD

050DCTBFLK

LiftMaster Receiver Logic Board DC. WiFi Bluetooth Enabled Lock Capable

  • This is 315MHz Security+ 2.0® Lock Capable Receiver Logic Board featuring Wi-Fi® and powered by myQ®.
  • For use with various LiftMaster® DC Chain or Belt Drive Garage Door Opener models; manufactured after 2017 only.
  • The unit will feature a yellow learn button and two lock terminals
  • Replaces 050DCTWFLK backwards compatible
  • Integrated Bluetooth technology will make it faster and even easier to connect to myQ®
  • Improved opener battery life with increased door usage when operating during a power outage on battery backup mode.
    • .......more details
111854.0005

Overhead Logic Board 575V 3Ph RSX/RHX

  • For RSX/RHX commercial ops. 575V
333-042

Serco Spring (Latch Bar) ** Price by Quote Only

  • For Serco loading docks
2376.162.18.870

Whiting Torsion assembly .162 wire size 18" spring length 87" shaft

1-0316

Richard-Wilcox 22 x 31 Track Bracket Double Zinc Plated

  • 1/2" clearance needed between doors. Maximum door thickness of 2"
  • Weight: 3.5 lbs
  • Capacity: 400 lbs 500 lbs
  • Material: Formed Steel 3/16" thick
2376.182.275.930

Whiting Torsion assembly .182 wire size 27-1/2" spring length 93" shaft ** price by quote only

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
2BXL

Control Station Exterior Surface Mount O/C N4 with Key Lockout

  • OPEN-CLOSE Push Button with Lockout
  • Metal Enclosure
  • Buttons aligned vertically H=4-3/8"" W=4-1/8"" D=2-5/8""
Installation Manual 2BXL
GHX-353-3/4HP-LH

Doorlec Explosion Proof Gear Head 3/4 HP 575V 3PH ECB Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
MOD117

Manaras Special Application Chip Modification

02-411

LiftMaster Pull Switch Assembly Nema 4

  • May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
  • In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
69987.3072

Todco Original Bottom Seal Reefer Cut to Size ** Special Order Item Price by Quote Only

  • Fits Serial #30662431-1
61390.3072

Todco Original Side Seal Reefer Cut to Size ** Special Order Item Price by Quote Only

  • Fits Serial #30662431-1
K1D6686CC

LiftMaster Expansion Board CSL24V

  • This is a replacement CSL24V Expansion Board
  • For use with various LiftMaster® Slide and Swing Gate Operators
O22R1104

AirLift Fitting Straight 3/8 x 1/8 NPT

O02R9205

AirLift Top Cap Complete w/Seals

GAREX-PAINT-BLK

Garex Touch-Up Paint Black

  • 0.5 OZ
10.1002.36

Truck Door Rivet 1/4 x 1-1/8 - 3/4 HD for #7515 Keeper Sold per Unit

  • Standard rivet used for installing #7515 Keeper
  • 3 rivets are required per keeper
2705.187_30

Whiting Curbside Torsion Spring.187 wire 2-3/16" ID 30" Long

  • Torsion spring wire only
  • .187 wire size
2704.187_30

Whiting Roadside Torsion Spring.187 wire 2-3/16" ID 30" Long

  • Torsion spring wire only
  • .187 wire size
LRS-LC

EMX Logic Controller

  • For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
  • Connects two stand-alone sensors to expand the detection area
  • Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
  • Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
  • Provides six (6) selectable logic functions and two (2) separate relay outputs
  • A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors
    • .......more details
RGH-6114-MON-LH

Manaras 1 HP 120V 1Ph Rapido Gear Head Op. Monitored ECB Left Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
50170

Doorlec Adjustable Torque Limiter GT/GH Models 3/4HP up to 2HP Ops

  • Also known as Friction Clutch
GH-RSF

Gear Head Rolling Steel Hood Mounting Plate

  • 1/4’’ steel plate painted with a black oxide finish
2376.192.34.930

Whiting Torsion assembly .192 wire size 34" spring length 93" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
3228.6

Whiting 2" Nylon Roller 3" Shaft Sealed Both Sides Upgrade Option w/Door Package

  • This is a Whiting original roller upgrade package on a complete door
EHJ-353-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 575V-3Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
EHJ-321-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 230V-1Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
GH-383-1

Doorlec Industrial Gearhead Door Operator 1 HP 208V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
GH-321-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 230V 1-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
19-5816

LiftMaster Trolley Chain Pack #48 for 16ft Door

  • Chain pack only
K20-1075C-2LP-H27

LiftMaster Electric Motor 3/4 HP 115V 1Ph Logic 5

  • Also known as: K20-1075C-2LP-H24
  • Replacement electric motor (3/4 HP 115/230V 1PH L5). For use with various LiftMaster® Logic 5.0 Gear-Reduced Commercial Door Operators
BRKIT001

Manaras Brake Resistor for 120V Rapido

  • Added option to RSH or RVH operators
Wiring instructions
HCT14

LiftMaster HCT Rail Only 14'

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
  • Will open a standard sectional door 13'6" high
O02R9210

AirLift Bottom Cap Check Ball

SHAFT072

Manaras Input Shaft for MLH 5/8"-18

G3353

GDI Chain Per 2 ft Length

  • If over 10' loop length is required
K77-38105

LiftMaster C-Clamp Kit SL595U Qty 2

  • Complete kit includes: (2) C clamps with mounting hardware
2807.200.340

Whiting .200 x 2-3/16 x 34" Curbside with Cones

LEVER091

Manaras Open Limit Actuator

Q055

LiftMaster Limit Switch Kit K75-50189

  • Also known as: Q166 Q165
610.5600.3

Whiting Panel Option for Stainless Steel 5600.3 HD Bottom Roller Brackets

  • This is an upgrade option when purchasing a door or bottom panel
MM00004

Micanan Frame Gearhead MSI0030

K75-30737

LiftMaster Disconnect Kit for GH

  • Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
  • Compatible with LiftMaster® Model GH Commercial Door Operators.
610.9723

Whiting Panel Option for Long Pull Strap 32" L

  • This is an upgrade option when purchasing a door or bottom panel
K10-3515

LiftMaster Retainer Guide

  • Also known as: 10-3515 G103515 103515
  • For use with LiftMaster® Models SL580 & SL590 Commercial Slide Gate Operators and Perimeter Access Solutions
510.4302.05

Whiting Stainless Steel Interior Hdwr Pkg 4 Rows Hinges 5 Panel

  • This is an Add-On option when buying a truck door
HARNESS099

Manaras Opera ECB070 12 Pin Conn Wiring Harness

HYBRID-BLK-16

Residential Side & Top PVC/Aluminum W/S with cap 16' Long (193") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
HYBRID-BLK-8

Residential Side & Top PVC/Aluminum W/S with cap 8' Long (97") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
HYBRID-BLK-9

Residential Side & Top PVC/Aluminum W/S with cap 9' Long (109") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
HYBRID-BLK-10

Residential Side & Top PVC/Aluminum W/S with cap 10' Long (121") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
K77-10897

LiftMaster Mounting Bracket Disconnect (Chainkeeper) H MH GH SD

  • Also known as: 10-10893 107011 10-40463 1010893 109027 K77-10704
21-35057

LiftMaster Transformer 460V 24VAC 40VA

  • 575V PRIMARY 24V SECONDARY
  • Same as K21-35057
41A6288

LiftMaster Work Light Hardware Kit

SR-9004-BLACK

Elton Reverse Angle Clip-On Vinyl Black 200ft Roll

  • Side Use – Clips onto Steel Jamb
  • Also for Residential Use
510.9723.00

Whiting Add-On Option 32" Pull Strap for Doors Under 98"

  • Upgrade option only - must accompany a door order
K86-RP10-208

LiftMaster Roll Pin 5/16" x 2-1/2"

  • Also known as: G86RP10208 86RP10208 86-RP10-208
71-6532448

LiftMaster Heater Kit Mod. 230V Field Install

  • Compatible with LiftMaster® Models SL585GL and SL595GL Slide Gate Operators
N4GH751L5-RH

LiftMaster Gearhead N4 w/Watertight/Oiltight Mod. and Brake 3/4HP 115/230V 1P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
MO00034

Micanan Brake Compression Spring (5/16" ID)

CDJH-34-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
19-40HL-NP

Half (Offset) Link #40 Nickel Plated

  • For #40 chain
ALUM-322

Aluminum 24" x 100' Spool Red # 322

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 322
  • Reverse side is #431 Bright White
Colour chart
GH-321-1-CONT

Doorlec Industrial Jackshaft Door Operator 1 HP 230V 1P Contactor Model (Hard Wired)

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
GH-321-1

Doorlec Industrial Jackshaft Door Operator 1 HP 230V 1P with ECB

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
MA006

LiftMaster Mega Arm Chassis

  • Sturdy aluminum construction
  • For LiftMaster MADCBBC MATDCBB MASTDCBB commercial parking gate operators
K94-37694-3

LiftMaster Electric Motor SL585U 1.5 HP

  • Replacement motor for SL585151U
K20-1150C-2LP-H28

LiftMaster Electric Motor 1-1/2 HP 115/230V 1Ph L5

  • For use with various LiftMaster® Logic 5.0 Gear-Reduced Door Operators
  • Also known as: 20-1150C-2LP K20-1150C-2LP K20-1150C-2LP-H24
DS50

Light Commercial Non-Insulated Rollup Sheet Counter Door

  • Max Width: 12’
  • Max Height: 6’
  • 26-gauge galvanized steel
  • Manual lift operation
  • Slide bolt or curtain lock
2376.206.325.900

Whiting Torsion assembly .206 wire size 32-1/2" spring length 90" shaft

K79-13493-2-600

LiftMaster Logic Board Replacement Kit FDCL Firmware Version 600

  • Replacement board for fire door model FDCL
26CW945255

Truck Door Intermediate Panel (15.5" x 98") Painted White for Whiting Dryfreight

  • These panels are 15.50" height x 98" width.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
0220-1K-390

Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz

  • Overhead compatible full-size transmitter
PRO-R4918

Linear Magnetic Rev Counter PCB Assbly 3KXLS 4KXLS R4918

  • Linear Professional series
7515

Whiting Handle Keeper for #77 Lock

77

Whiting Steel Outside Cam Lock Black Standard

G220-1

Heddolf 1-btn Genie Compatible Remote 9 or 12-Dip Switch 390 MHz

  • Genie compatible transmitter
14-1002

PVC Roll 8" x .120" Standard Smooth 200' for Replacement Strip Curtain

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
3BXT-YELLOW

Replacement Button/Switch Only - Yellow

  • Replacement button for 3BXT
GTO-R5211

Nortek Retrofit Replacement Control Board Green

  • Replaces the R4211 replacement control board
  • Retrofit board with upgraded firmware that is compliant with UL 325 Version 6
  • Color is green
  • Compatible with the Mighty Mule FM500 & FM502
  • Compatible with GTO PRO 2000XL GTO PRO 3000XL GTO PRO 4000XL
  • Compatible with the old GTO PRO 2000 GTO PRO 2500 GTO PRO 3000 GTO PRO 4000 Swing Gate Operators
    • .......more details
41D8257

LiftMaster Cover Only for 8550W

  • One piece cover is compatible with LiftMaster Model 8550W Elite Series
2806.177*230

Whiting Spring Assby .177 x 2-3/16 x 23" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 23" Long
  • Roadside
  • For Curbside order part # 2807.177*230
K77-16011

LiftMaster Hardware Kit for CPS N4

  • This is a replacement Sensor Hardware Kit only.
2376.206.30.870

Whiting Torsion assembly .206 wire size 30" spring length 87" shaft

C-24X12-134-LEXBLK

Thermal Window 24" x 12" for 1-3/4" Door Lexan Black *** Special Order by Quote Only

  • For 1-3/4" thick door
  • Glass type: Polycarbonate (Lexan)
10TD900INDHH3

BEA 3-Button Digital Transmitter Nema 4 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • IP65
  • Operating temperature: -10 to 55C
  • Controls one 10RD900 receiver
Product guide
11-10014

LiftMaster Clutch Shaft

  • Commercial door opener clutch shaft
  • 11 7/8" Long; 1/2" Wide
ERN

Erone 4-Channel Transmitter 433MHz

  • Innovantive and extreme crashworthiness
  • Casing: aluminum and black polycarbonate
  • Range (line of sight): up to 250 m (820 ft).
  • Dimensions: 70 mm x 40 mm x 10 mm (2.75 in. x 1.57 in. x 0.4 in.)
  • Comes with: One lithium battery (2032)
  • Optional 26-bit Wiegand proximity tag built-in: ERN (old #S7TR2641E4T (HID) old # S7TR2641E4M (Mifare)
    • .......more details
Wireless System Chart