Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
OCDFX4

Overhead Door 4-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX4.S GIDFX4.S
KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
    • .......more details
Installation instructionsManuel d'installationSell sheetBrochureWiring instructionsInstructions de cablage
CHK-991

Chain Hoist Keeper

  • Chain hoist keeper is not the same as the chain keeper
CAP-450-540-110V

Capacitor 450-540 MFD 110/125V with Resistor *** To Extent of Inventory

  • Same as CP-CAP-COM-450-540
  • Motor start capacitor
PRO-GH-5011U-R

Micanan 1/2HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
27028

Doorlec Electric Motor 3/4HP 115/230V DC403C

  • Bolts to gearhead (c-flange) openers
Wiring diagram for 120VWiring diagram for 230V
PRO-H-5011E-LH

Micanan 1/2HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
PW-110

Devanco Power Wipes Heavy Duty Dual Sided Cleaning Towels 110/Bucket **NLA

  • These towels have an abrasive side for tough scrubbing and a smooth side for delicate surfaces.
  • They are loaded with commercial grade cleaning power and won't dry out like the competition
  • 110 double-sided 12" x 8" towels Citrus scent
  • Safer than harsh thinners or gasoline
  • Use on nonporous/nonabsorbent surfaces to include: all metal surfaces sealed wood equipment vinyl and ceramic tile.
  • We recommend testing on plastics rubber and latex paint in inconspicuous areas before use.
    • .......more details
Safety data sheetFiche de données de sécurité
CR-2

Battery CR2 3V Photo Lithium Battery

  • Camelion brand
CP-MO-34-575/3

Lynx Electric Motor 3/4 HP 575V

  • Electric motor only
ODCC-SPEC.ORDER

Wayne Dalton Special Order *** Price by Quote Only

  • Misc. code for all special order items
WOR

Linear Wiegand Output Receiver 318 MHz

  • Designed for use as an access control interface for Linear’s block coded digital transmitters.
  • The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
  • Ideal way to facilitate handicapped access
  • Multi-button transmitters can double as personal emergency devices for triggering security alarms
  • RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
  • Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding
    • .......more details
19863R

Genie Clip and Collar Rail Connectors

  • For Genie screw drive units having split rails use a collar and spring clip to join the 3-piece screw.
  • Complete collar and clip set for one 3-piece rail.
  • Compatible with all screw drive Genie garage door openers
  • Set of 2 clips and 2 collars
  • Same as 19806A04 and 19807A04
KPW5

LiftMaster New Wireless Commercial Keypad 5-Code Sec.+2.0

  • Designed to work exclusively with Security+ 2.0
  • 5 permanent PINs and 10 unique temporary PINs ideal for residential and small commercial applications; unique temporary PINs can be set for 1 to 9 uses
  • Allows for removal of a single PIN while maintaining full access for other users
  • High-impact polycarbonate front cover; perfect for rugged outdoor environment
  • Blue backlit metal keypad makes it easy to use under low-light conditions
  • Electronics are fully sealed and meet NEMA 4X water protection requirements
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochureCompatibility chart
41D0843

LiftMaster Replacement Motor and Sensor 12VDC

  • For Craftsman garage door opener
PMR10RIT

Carlo Gavazzi Retro-Reflective Sensor with Imperial Connector

  • PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
  • Immune to ambient light Selectable output function.
  • The plastic housing is IP 67 rated and allows cable or screw terminal connections.
  • Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
  • 24-240 VAC or 12~240 VDC
  • Relay Output
    • .......more details
KPW250

LiftMaster New Wireless Commercial Keypad 250-Code Sec.+2.0

  • Comes with a durable blue LED backlight metal keypad and a 5- year lithium battery.
  • KPW250 is perfect for larger commercial applications such as a maintenance door entrance or gated entrance for a small business.
  • Compatible with Security+ 2.0 Security+ as well as Linear Multi-Code 300 MHz
  • 250 permanent PINs and 10 unique temporary PINs mean flexibility to set up multiple users for commercial settings; unique temporary PINs can be set for 1 to 9 uses
  • Allows for removal of a single PIN while maintaining full access for other users
  • Zinc-alloy metal front cover for tough environments
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochureCompatibility chart
HTR

LiftMaster Heater Kit for DC Pad mount Gate Operators

  • Heater kit for pad mount DC gate operators.
  • Includes battery bracket.
  • Protects system to -40° F and installs on operator frame
  • works on 120 or 240 VAC.
Installation Manual Manuel d-Installation
27-24301

Truck Door Single Torsion Spring Assembly 89.5/48 for Todco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 89.50" Spring Length: 48" Wire Size: .243
  • Right hand wound
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
    • .......more details
PS243F

Adjustable DC Power Supply 6V/12/24V 3 AMP

  • 3 preset output voltages : 6/12 and 24VDC (an adjustable mode is also available with a jumper setting)
  • Full adjustment from 2 to 24VDC if required
  • Maximum 3 amp (Output at 70 deg. F and free air)
  • Regulation:97.5%
  • Maximum input voltage 36 volts
  • Fuse protected
    • .......more details
Wiring Diagram / Diagramme de raccordementSpecifications / Spécifications
MD-00034

Micanan Connecting Link #410

J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
Installation manualManuel d'installationSell sheetBrochure
OTH-6112-ECB

Manaras Trolley Operator 1/2HP 120V 1Ph with Electronic Circuit Board

  • The OTH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
Installation ManualSell Sheet
32-34792

LiftMaster Gear Reducer Nema 56C 30:1

  • Compatible with LiftMaster® Model SL585 Slide Gate Operators
  • Same as K32-34792
D525-54-HL

Cable Drum High Lift 54" D525-54HL Torque Force Pair

  • Maximum hi-lift: 54"
  • Capacity: 500 lbs per drum
  • Max. cable size: 3/16"
  • Cable length: Floor to shaft center 66" minus amount of Hi-Lift
  • Cross reference: DNS 54 OMI 54HL M134-1375
BG790-50-11

LiftMaster Industrial-Duty Wishbone Barrier Gate Operator 1/2 HP 115V Arm & Weight Included ***Must include Arm G651208R***

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
  • The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
  • Standard Features: Control inputs and Adjustable limit settings
  • Includes a 24' arm
Installation ManualSell Sheet
MK00108

Micanan Telemecanique Contactor 24V for Logic Board with Contactor Interface

  • LC2K1210B7 mini contactor
41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

  • With end-panel
  • Also known as 41A5507 41A5507B
8030234

Marantec Chain Connector Kit

  • Works for all Marantec Chain Drive Openers
  • For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
  • Includes two connector pieces and four screws
  • Not for use on the heavy duty rails used by Q7900 & M4900e
41DS002-2

LiftMaster Electronic Circuit Board Screw Drive Models 3840 *Discontinued*

  • Logic Control Board 315 MHz
  • Compatible with 3840 Screw Drive Purple Learn Button
UN201

LiftMaster Thermostat Controlled 500-Watt Heater & fan for MAT Gate Operators and more

  • For temperatures below 32 F
  • Designed for use with Mega Arm Tower gate operator
  • Can be used for other applications as required
  • Heater operates when termperatures are below freezing
  • Plugs into a standard 120V outlet
  • 500 Watts with a circulating fan
    • .......more details
Installation Manual
D400-144-1

Cable Drum Standard Lift 12' Torque Force Pair

  • 12 ft Standard lift cable drum. Aluminum die cast alloy.
  • Max. door height: 12'-1".
  • Rated lift per drum: 375 lbs.
  • Max. cable diameter: 5/32".
  • Mounting: 1" tube or solid shaft with 1/4" keyway.
  • Cross references: DM413 DNS 4-13 OMI 2100.
    • .......more details
MB-02001

Micanan Electric Motor Only 3/4HP 110/220V 1PH

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair *** To Extent of Inventory

  • Brackets are predrilled
  • Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
  • Made of metal
  • Sold as a pair
  • 9" x 3" L-Shaped
SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

  • Actual length is approx. 16'-1"
OPJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
767

Fasteners Lag Screw Hex Washer Regular Profile 1/4" x 1" 1000/Box ***NLA

  • 7/16" head
RBH753L5-RH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
71B120G

LiftMaster Brake Kit 115V with Solenoid Field Install SL585 and SL595

Instruction Manual
MP-00001

Micanan Timer to Close 24V Modification

  • 3-button o/c/s function timer will start counting from fully open reverse and reset from any device
  • 24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)
BEA-REMOTE

BEA Falcon/LZR Programming Remote

  • Makes it easy to set up and make adjustments to all key parameters of the Falcon motion detector while at ground level
Programming instructions
SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

  • Red and Green LED traffic light
  • Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
  • 24 volt DC input voltage only
  • Long lasting low power consumption
  • A simple reliable and cost-effective way to reduce accidents around the loading dock.
  • Available in two colors: safety yellow or black.
    • .......more details
Installation InstructionsInstructions d'installationWiring DiagramSchéma de connexion
CR-2149

Universal Photocells

  • Will work with all major brands of residential openers including: Chamberlain Liftmaster Craftsman Overhead Stanley Wayne Dalton Linear Raynor and Moore-O-Matic
  • The self programming feature allows you to simply hook up to the existing wiring
  • Suggested replacement for Stanley 49522 - must cut black wire
Installation Manual
PRO-GH-VFD

Micanan Variable Speed 1 HP 208/230V 3 Phase Operator

  • Variable Frequency Drive Operator
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
MDR-2

Linear 2-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates two devices
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No cables or coiled wires
    • .......more details
Programming Instructions
PRO-W_MOD

Micanan Nema 4/12 Modification

  • This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.
F539.90000

Bircher Infrared Programming Remote RC Duo 2 Red

  • Conveniently program all parameters from ground level
  • Backlighting of specific buttons provide instant confirmation of programmed parameter & value
  • Configure any Hercules 2 Hercules 2s Reflex 2 or UniScan sensor with the same remote
  • Multiple address feature allows programming of a single sensor even in close proximity to other sensors
  • Large highly visible buttons
  • Automatic off feature conserves battery life
    • .......more details
Programming InstructionsF539.90000 Sell Sheet
BEARING005

Manaras Flange Bearing ID 5/8"

  • Flange bearing for 5/8" shaft
108135.0004

Overhead Serpentine V- Belt for JST 31"

  • Overhead Door commercial garage door opener serpentine belt 108135-0004
  • Type "J" 31"
387LMC

LiftMaster Universal Wireless Keyless Entry

  • Universal Keyless Entry works with garage doors made by LiftMaster Genie Stanley Overhead Door Wayne-Dalton Craftsman Chamberlain and Linear/Moor-o-Matic.
  • Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
  • Wireless – powered by one 9V battery (included)
  • Weatherproof slide-up protective cover
  • Open or close the garage door without using a remote
  • Backlit keypad
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
8010-3FT

Bottom Sweep for Entrance Door White ** No Longer Available

  • Height adjustable
  • Vinyl: White
  • Length: 3 ft
7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

  • I-Beam Chain Drive Rail for model 3595
K001A5566

LiftMaster GL Replacement Board ***Discontinued. No Replacement.

  • Replacement Logic Board for LiftMaster Gate Operators
  • Fits Slide operator SL570 SL575 SL580 SL585 SL590 SL595
  • Fits Swing operators SW420 SW470 SW490
881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

  • Push button for garage door operation
  • Motion-detector automatically turns on the light when movement is detected
  • 150 degree sensing angle for motion sensor
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
  • Light run-time is 4 1/2 minutes with adjustable light timer option
    • .......more details
880LM

LiftMaster Smart Control Panel Sec+ 2.0 ***Discontinued replaced by 880LMW***

  • Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
  • Equipped with the Maintenance Alert System
  • On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
  • Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
  • Displays Fahrenheit or Celsuis
  • Motion detector automatically turns on garage door lights when movement is sensed
    • .......more details
Installation ManualManuel d'Installation
829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

  • This innovative monitor lets you check and close the garage door or gate from any room in the house.
  • Green and Red LED lights indicate whether the garage door or gate is open or closed.
  • Volume controlled audible alert lets you know when the garage door or gate is being opened.
  • Able to monitor and close up to four garage doors or gates.
  • Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.
Programming InstructionsInstructions de programmation
T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

  • This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833TC (190-109023)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
877LM

LiftMaster Sec+ 2.0 Keyless Entry

  • Features Security+2.0™ rolling code technology
  • One-button-to-close feature
  • Temporary password option
  • Program code directly from keypad
  • Backlit keypad
  • Includes 9V battery
    • .......more details
877LM Manual
OSH-6113-ECB

Manaras Opera-SH 3/4HP 120V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
MDTK

Linear MegaCode Wireless Keypad 318 MHz *** To extent of Inventory Repl. by LPWKP-G

  • Activates multiple MegaCode receivers
  • User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
  • Programming is easy via the keypad; MegaCode receiver auto-learns PIN
  • Backlit keys for easy viewing
  • Wall mounting hardware (2 screws and anchors) supplied
  • Power: 9-volt battery included
    • .......more details
Programming Instructions
7953

Whiting Truck Door Hinge Gasket White

4002-6FT

45 Degree Aluminum Retainer for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
25-42-110

Extension Spring 7' Door - 110 lbs White

  • Double - Loop
  • 25" long 42" stretch 110 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

  • Double - Loop
  • 25" long 42" stretch 90 lb load
  • Sold individually
  • Same as part number 109
  • Rated for 10000 cycles
Spec Sheet
412HMC

LiftMaster Single Channel Co-axial Radio Receiver 4 Wire 390MHz

  • 390MHz universal coaxial receiver for Open/Close
  • Will accept 15 remotes on "High Security" or 31 remotes on "Normal security"
  • 8" wire antenna included (part #41C3196)
  • Input voltage 12-24V AC/DC
Programming InstructionsInstructions de programmation
28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
H11G03

Hinge #3 x 11 gauge

  • 11 gauge # 3 hinge - 0.72 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
RN0024

Roller 2" Nylon 4" stem Black

  • Black Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.75"
  • Box qty: 250 Box weight: 58.2 lbs (2-4 Black Nylon)
  • No bearings in head
25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

  • Zinc plated shaft 10 roller ball design
  • Shaft Length: 3" Overall Length: 3.75"
  • Cross Reference: W #2996 T #70224
25-10001

Truck Door End Hinge for Todco Roll-Up Doors

  • Zinc plated steel construction
  • Four-knuckled to ensure smooth door operation
  • Cross Reference: T #69035 W #4007 220000
IRB-4X

EMX Industries Nema 4 Through-Beam Photocells with Hoods *** No longer available

  • Outdoor and carwash through beam Commercial Photocells.
  • Up to 115' sensing distance
  • Electronic sunlight filter
  • Automatic compensation for temperature changes
  • 12 to 24VAC/DC input voltage
  • one form C relay (NO and NC output)
    • .......more details
Installation ManualSell Sheet
MF00003

Micanan R.H. Phillips Machine Screw 4-40 UNCx1-1/2

  • crew to hold double limits
DM120-125-T/FORCE

Cable Drum High Lift 120" D575-120-1-1/4" Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
T-931

FL-Allstar 1-btn Transmitter 108787-311 MHz

  • This one channel transmitter controls one residential door(open-close with the same button).
  • It has a nine switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 9931T (190-108787)
  • Dimensions: 4 5/8'' x 2 3/8'' x 1 1/4''
Programming Instructions
41AC050-1M

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: circuit board end panel and light socket
  • For chain drive units with one light
  • Fits 3245 & 3255
  • Also known as 41AC050-1 041AC050-1M
MM00021

Micanan Disconnect Lever MSI0012

DCWALLCTL

LiftMaster Floor Level Wall Controller with LCD Display

  • Compatible with LiftMaster MAXUM Commercial Door Operators.
  • 4-line LCD display gives you access to more information at all times
  • Bringing programming troubleshooting and Diagnostics down to the floor level will save you time and money
  • Menu based user interface allows you to scroll through edit and save options and settings easily.
  • Dimensions: 3.586” W x 8.166” H x 1.732” D
41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

  • Gear and sprocket assembly for belt drive models between 1995-2002
Installation ManualManuel d'Installation
MF-341-011

Serco Manual Brake Band

  • For use with Serco brand dock levelers
ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 559
  • Reverse side is #431 Bright White
Colour chart
1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
SW-200

Devanco Torsion Spring Winder 200 for 1-3/4" to 2-5/8" Torsion Springs

  • pring Winder 200 is a torsion spring tensioning tool designed for use with a cordless drill (Non-impact). Developed for professionals in the installation and maintenance of residential garage doors. The device prevents work-related accidents and significantly reduces physical strain of door installation work. The Spring Winder 200 is suitable for all residential garage door torsion springsranging from 1-3/4 inches to 2-5/8 inches. Technical Specifications:
  • Weight: 5 kg / 11 lbs
  • Length: 56 cm / 22 inches
  • Max. Torque: 147.51 lb/ft
  • RPM: 500-2000
  • Material: Aluminium steel plastic
    • .......more details
Sell Sheet
2241GRB

LiftMaster Adjustable Guide Roller Bracket Sold Each

  • LiftMaster Guide Roller Adjustable Guide Roll Bracket (req. for dual system) (Corrosion Protected-Zinc)
  • Adjustable bracket provides ability to mount 2 Guide Rollers
IP-SDS

CDVI Point of Entry Exterior Single Door Surface Mount Video Intercom System

  • Intercom system designed for single resident or commercial properties providing video entry via IP with a free to download smartphone app.
  • Ideal for outdoor use on single home or small business.
  • Up to 32 monitors can be connected to this device.
  • Pushing the button will call all monitors inside the building.
  • 170 degree fisheye camera single-button and audible anninciation.
  • IP54 (recommended to be put under a canopy or covering)
    • .......more details
IP-MDS

CDVI Point of Entry Exterior Multi-Tenant Surface Mount Video Intercom System

  • Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
  • Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
  • Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
  • IP54 (recommended to be put under a canopy or covering)
  • Operating temperature: -10C to 50C
  • Stainless steel panel
    • .......more details
K41-0383-000

LiftMaster Toroidal Transformer 1200lb / 120VAC-240VAC

  • For Maxum ops
6200-2-7-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

  • 2" diameter white nylon tire
  • 6200 sealed precision bearing
  • Zinc plated 7.04" Overall Length 5.96" stem
  • Rating: 100lb; 100000 cycles of a 12′ door
12-1009

PVC Strip 6" x .060 Standard Clear Smooth for Replacement Strip Curtain Sold per Foot

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

  • The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
  • Soft-Starts and Soft-Stops
  • Electrically activated drum-band type solenoid brake
  • Ceiling-mounted with 8.69" headroom clearance required below the tracks
  • Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
  • Tracks sold separately
    • .......more details
200R

Chain Hoist Wall Mount 3:1 200R-41B36-1" Torque Force (244687)

  • Ratio 3:1
  • Sprocket: 41B36 Bore: 1"
  • Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
  • Pull load hand chain: 35 lb max
E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

  • Used on the BL229 gate op.
2022691

FAAC Control Board for Model 741

7-6088

RW Hanger 321 For use with #31 Track

LAP

Linear External Antenna Kit LA-P AAE00366

  • Compatible with DVS-1200 DVS-2400 and DUAL-824 systems
  • Omni-directional external antenna
  • Antenna connector mounts inside case wire whip extends outside case
  • Compatible with EXA-1000 external antenna
  • Designed to enhance the radio range of Linear's DVS-1200 DVS-2400 and DUAL-824 systems.
  • The LA-P antenna Type F connector can also be used for coax connection with a remote mounted EXA-1000 antenna.
    • .......more details
P-535T

Pulsar 3-btn 27-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 27 doors
  • 8 dipswitches 318 MHz
Programming instructions
050ACTBMC

LiftMaster Receiver Logic Board AC WiFi

  • 050ACTBMC is a replacement Bluetooth® Enabled Receiver Logic Board Kit
  • For use with various LiftMaster® and Chamberlain® Wi-Fi® AC Belt Drive and Chain Drive Garage Door Openers manufactured 2011 to 2022 only.
  • The unit will feature a yellow learn button
  • Also known as: 1D8088-1 050ACTWFMC 050ACTWF 1D8808-3 041D80881D8088-1 50ACTWF 050ACTBMC 50ACBL1 50ACBL2 50ACBL3 50ACBL4 50ACBL5 50ACCL1 50ACCL2 50ACCL3 50ACCL4 50ACCL5 50ACBR1 50ACBR2 50ACBR3 50ACBR4 50ACBR5 50ACCR1 50ACCR2 50ACCR3 50ACCR4 50ACCR5
DECO-FASTNR-HNGE

Decorative Hinge (Carriage-Style) Fastener Black Sold per Screw

  • Self Taping screw #8 x 1/2" 18-8 Stainless Steel Black Head
  • Black crinkle head
  • Ideal for decorative (carriage style) hinges
INTERLOCK005

Interlock Switch for Sectional Doors Rail Mount 1 NC Contact

  • Mounts on the door track to prevent the use of the operator when the door is locked