Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
CB14B0500-KOR

Cable 1/4" 7x19 500' Galvanized Supreme

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
308301

Linear 2-Channel Multi-Code Key Ring Transmitter 300 MHz

  • Open/Close remote for 2 doors
  • Compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Programming instructions
GHW-353-1HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1 HP 575V 3P with ECB

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
MOD114A

Manaras Synthetic Oil Upgrade Only

  • This Upgrade Mod. is only available when purchaed with a compatible operator
  • Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances
2376.206.325.900

Whiting Torsion assembly .206 wire size 32-1/2" spring length 90" shaft

27091A

Genie Limit Worm Gear for PMX500

  • Limit worm gear sits in the Limit switch plate and works with the Limit Worm Drive to activate the limit wheel
  • Works With Genie Models PMX 500-IC/B IC250/B
106-0005

Rodent Block Pull Chain Seal 2"

  • Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
  • The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
  • Features solid cast aluminum construction easy to install and completely cover the chain opening.
  • The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.
R5213

Bearing Flangette Retainer Only Standard

  • Does not include bearing
  • For use with all C16-32F and C20-32F
  • Steel Zinc plated finish
3BXT-BLACK

Replacement Button/Switch Only - Black

  • Replacement button for 3BXT
RESET005

Manaras Resettable Overload Fuse 8A 1 Phase

XBA8

NICE Apollo Red/Green Internal Traffic Light Module

  • This module makes your barrier shine red and green signaling oncoming traffic when it is safe to pass through the barrier. Designed for M-Bar and L-Bar barrier gate operators.
41D8257

LiftMaster Cover Only for 8550W

  • One piece cover is compatible with LiftMaster Model 8550W Elite Series
41D9204

LiftMaster Wire Harness LED

  • Same as 041D9204
BT501L5-BQ

LiftMaster 1/2 HP 115/230V 1p Commercial Trolley Op. wi/ Brake and Slow Speed Mod Installed Logic 5

  • Low profile trolley operator with brake and slow speed modification installed
  • Comes with #48 roller chain
MP00215

Micanan Limit Shaft Assembly N1 H/J

URBAN-MR-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Narrow multi rib pattern - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
K44-1210-4XD

LiftMaster E-Box Enclosure N4

  • Plastic replacement box only
20449R

Genie Chain Glide Rear Housing Cover

  • Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
  • Contains gear housing cover only
CP-SH-34-12

Lynx Clutch/Drive Shaft Assembly No Pulley

  • For trolley operator
K107A0031

LiftMaster Replacement Keys (2) for KPW5 KPW250

  • Replacement keys only
XBA3/U

NICE MBAR Replacement Logic Board

CGH103L5-LH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Left Hand

  • Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
  • Security+ 2.0®
  • Includes CPS-UN4
02-406-3

LiftMaster Key Set Qty 2

  • Replacement Key ONLY for 02-406 station
  • Keys for 02-406 2015 To Present #301 x 2
41D0216-2

LiftMaster End Panel with Light Socket

  • Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
  • Circuit board not included
41D8260

LiftMaster Cover 8355W

  • A one piece LiftMaster® "Silver" Replacement Cover.
  • For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers
21001

Limit Switch Micro

26117

Doorlec Limit Cam Retainer Plate

  • Fits Most Doorlec Commercial operators except Explosion-Proof Operators
  • Will not fit on waterproof operators with small electrical enclosure built before 1999
HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
K77-19130

LiftMaster Hardware Kit LA400 LA412

Q238

LiftMaster Gate Adjustment Switch K75-50339

  • This replacement kit is compatible with the following models: CSW200 CSW200U CSW200UL ROBO SWING
10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

P-0130

Autogate Motor Belt Tensioner Upgrade Kit

  • This isneeded to change over to their current motor
050DCDDOWF

LiftMaster Receiver Logic Board WiFi Dock Door Jackshaft

  • 050DCDDOWF is a Receiver Logic Board Replacement Kit.
  • Compatible with LiftMaster® Model DDO8900W DC Light-Duty Commercial Jackshaft Operators; featuring WiFi®
CBC532-SS

Thimble 5/32" Stainless Steel Sold Individually

ME00008

Micanan Disconnect Shaft Gearhead 3/4" x 15.75"

7001-10-ANODIZED

Commercial Side & Top Weather-Strip 10' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
K76-36681

Liftmaster Replacement Antenna for STAR1000

  • This is an antenna replacement kit for the PPWR & STAR 1000
K1D8424-1CC

LiftMaster Power Board 3 Ph SL585U/SL595U

  • For use with LiftMaster® SL585U & SL595U Series; and various 3 Phase Commercial Slide Gate Operator Models.
7205

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors for #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
BPPB17524

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 289"(24')

H7NA12

Richards-Wilcox Hinge 7NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
H6NA12

Richards-Wilcox Hinge 6NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
601815

RG6 77% BR Coaxial Cable

  • Black coaxial cable
  • This price is for 1000 feet
J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
K081C0168

LiftMaster Screw Drive Rack

  • Also known as: 081C0168 81C168
  • This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240
RS2910B

Roller 2" Steel 9" stem 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 8.41" Overall Length: 9.46"
  • Head and Stem Finish: Bare
  • Shoulder: Bulged stem
  • Rating: 15000 cycles of a 12' door
  • Load: 75LB
    • .......more details
4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
12502

Doorlec Clutch Plate Aluminum 4" dia x 5/8" bore

  • Works with model LJ/LJH
H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
2100-564

Linear Clutch Disk Facing HSL HSLG

CAMPLATE001

Manaras Cam Plate GH Standard

22010

Doorlec 1-22mm Cylinder Complete with Normally Open Contact Spring Return Includes 2 keys

OSH-6813-ECB

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions
SPRING001

Manaras Cam Guide Plate Spring

.192-2-R

Cut-to-Length Torsion Spring .192 x 2" Right Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
41A7618

LiftMaster End Panel with Battery Cover and Light Socket 8550W

218-45-10

PVC Connector for 3/4" - 3/32" RAH

JA383

FAAC Sprint 383 Board 115V

SF175-W

Spring Fitting 1-3/4" Winding Side Only 1" shaft

MT22-MON-GRY-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MT22-MON-GRY-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
10.1002.3

Truck Door Rivet with Splines 1/4" x 1" Steel

  • Mild steel construction
  • Round head design 3/4" head
  • Standard hinge rivet
CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

RP-BRK-WALL

Lynx Wall Bracket RSI

CH503L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
1004-2-10'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 10 ft***Actual Length 10'1"***

  • For door thickness 2"
K72-12789

LiftMaster Hand Chain Shaft Kit GH (1/2 - 2HP)

  • Complete with: Bevel Gear 3/4" ID Hand Chain Guice Hand Chain Shaft Bearing 3/4" ID Nyliner Bearing Compression Spring Chain Wheel Washers Roll Pins and E-Rings
C9/90-KIT

Felco C9 Parts Kit Only

  • Parts kit only
  • Kit consists of main bolt nut counter nut and washer.
41D0277-1

LiftMaster Transformer WiFi Battery Backup

  • For Wi-Fi Battery backup garage door openers; manufactured after 2011
  • Same as #204D0277-1
Q025

LiftMaster Motor Pulley 2-1/2" OD 1/2" Bore (K17-50098)

  • Replacement motor pulley of motor output shaft for Liftmaster Elite models SL3000UL and CSW2000UL
Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

  • Hand crank for SL3000
PRO-GH-10021U-R

Micanan 1 HP 220V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
PRO-GH-10081U-L

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
BBSI-BCSI

Insulated Cabinet Option for BCSI Gate Op ** Price by Quote Only

1005-1-1/2-14'

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-1/2"
MO00027

Micanan Clutch Spring 0.218 x 0.812 x 1" 4 Coil Zinc

510.2996.07

Whiting Steel Roller Upgrade Option for 7 Panel DF Door

  • Upgrade option only - must accompany a door order
MGH-6535-ECH-RH

Manaras 1.5 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
PRO-APTC-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
2806.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 20" Long
  • Roadside
  • For Curbside order part # 2807.171.200
MP00128

Micanan Up-Charge Track and #41 Chain for 10' h Door PRO-APTC

  • For 1/2 HP Micanan trolley operator PRO-APTC
CP-SH-58-1038-HDC

Lynx Complete Limit Shaft Assembly for HDC

  • 5/8" x 10-3/8"
  • Same kit used for MCJH except the HCT has 1 extra nut
PL-A22-BOARD

Lynx RPM Reader Board Proline

MH00019

Micanan Precision Bearing 3/8" ID ** Replaced by MH00096

20104

Doorlec Coupling Spring 5/8" LJH

26CW945215-CUT

Truck Door Intermediate Panel (11.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

  • These panels are cut to customer's exact measurements.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
.262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
SETR2641AM2KH

Erone 2-Channel Mini Transmitter with HID Tag Black 433MHz

  • With built-in HID tag
  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart
ARMP5

LiftMaster DC Power Supply for Intercom/Maglock *** to extent of inventory

PRO-GH-10011U-L

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
.437-6-R-C

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.437-514-L-C

Cut-to-Length Torsion Spring .437 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.421-6-R-C

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-6-R-C

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-514-R-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
620-100990

Linear Heater Kit Assembly 230V Cage Style

  • Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)
.375-514-L-C

Cut-to-Length Torsion Spring .375 x 5 1/4" Left Hand Wound. Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.331-258-L-C

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.319-258-L-C

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed