Devanco Canada - Get The Right Garage Door Opener‎ and Parts

INTERFACE003

Manaras Y-Connect Signal Merging Module

N4 compatible with 2 x monitored entrapment protection devices
Compatible primary devices: PHOTO061/061A/065/070
Secondary devices: monitored photocells light curtains electric sensing edges and/or non-contact sensing edges

Installation manual

6200-2-4-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 3.48" Short Stem

2" diameter white nylon tire
6200 sealed precision bearing
Zinc plated 4.56" Overall length 3.48" stem
Rating: 100lb; 100000 cycles of a 12′ door

ALUM-5P2

Aluminum 24" x 100' Spool Rockwell Blue / Bleu Rockwell # 5P2

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P2
Reverse side is #431 Bright White

Colour chart

TC3-211-C

Lynx Commercial Trolley Op. 1/2HP 120V for 14' High Door Contactor

OWL

EMX Microwave Motion & Infrared Presence Sensor

The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
Supply Voltage: 12-24 VDC/AC
Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
Connections: 32 ft (10 m) 8 conductor cable directly from sensor

.......more details

Manual Sell Sheet Quickstart Guide

41C0589-2

LiftMaster Belt Cap Retainer

Also known as: 041C589-2 41A537 41C589-2
For use with various LiftMaster® and Chamberlain® DC Belt Drive Garage Door Opener Models such as 85503
Complete kit includes: Sprocket sprocket cover and replacement screws

ET1820PPAS-1

Carlo Gavazzi Through Beam Reciever 20M Plug

High power through-beam photoelectric switch.
Range up to 20 m.
Easily adjustable sensitivity with 270° potentiometer.
LED output indication.
Precise detection through narrow beam.
Short M 18 metal housing for heavy duty applications. IP 67.

.......more details

ET1820-1

Carlo Gavazzi Through Beam Emitter 20M Plug

High power through-beam photoelectric switch.
Range up to 20 m.
Easily adjustable sensitivity with 270° potentiometer.
LED output indication.
Precise detection through narrow beam.
Short M 18 metal housing for heavy duty applications. IP 67.

.......more details

RADIO-EM102

Manaras Mini 3-btn Rolling Code transmitter 390 MHz

Field Configurable
Hand Held or Keychain three button
Rolling Code Technology
1 Door (SD) Open/Close/Stop or Multiple Doors (MD) 1-3 single-button field selectable
Config. Trad. Comm. Sesquence or Alternating Sequence (SBC) Open/Close/Stop (with ECB)
Nema 1

.......more details

Manual

MEL-II-TX10

Miller Edge Monitored Edge Link-II Transmitter

Miller Edge Monitored Edge Link II TRANSMITTER ONLY
Monitors the presence and function of any 10K (T2) monitored sensing edge
Provides a monitored wireless signal transmission from the sensor to the operator controls
Improved immunity to RF interference with 916 MHz operating frequency
Eliminates visible coil cords and retracting reels
Saves installation time

.......more details

LMLED1

LiftMaster LED Bulb 60W Equivalent 1/pkg

Designed to minimize radio frequency interference
Daylight white light output (5000K) ideal for garage use
800 lumen / 60w equivalent
22-year life
Durable: shatter-resistant and cold weather tested to -30° F /-34° C

65-92131

LiftMaster Dual Aux Trolley Mod. M15 #41 Chain for 12ft High Door

Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
Includes up to 12ft of tracks
For H/J/GH

FLO2R-SA

NICE 2-btn Rolling Code Keychain Remote 433.92 MHz

Rolling code No internal dip switches programming with the reciever
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

8030279

Marantec Replacement Belt with Tab for 8ft Door

Overall Belt Length = 250"
Travel limit tab attached to belt
For Marantec opener models: M4500 M4700 Q7500 Q7700 Q7900 M4500e M4700e M4900e Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy 380 Synergy Solo
Check the Belt Connector while you are replacing the belt. If it's worn or cracked it should also be replaced

106-0006

Rodent Block Pull Chain Seal 2.5"

Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
Features solid cast aluminum construction easy to install and completely cover the chain opening.
The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.

10.1003.11

Whiting Step Bolt 1/4"-20x 1-1/2"

Used with keps nut #796 - sold separately
Ideal for installing hinges on dry freight doors

MYQ-SGC1WLM

LiftMaster Smart Garage Camera ***No Longer Available

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

LA400-JB40

LiftMaster Junction Box w/Cable 40'

108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

Indented Hex Washer Head
7/16" Head
Max RPM = 2000

41D8257

LiftMaster Cover Only for 8550W

One piece cover is compatible with LiftMaster Model 8550W Elite Series

XT-1H

Linear 1-Channel Hand-Held Mid-Range Transmitter *** No Longer Available

Up to two miles of line-of-sight range
RF transmit LED
Push button activation
Includes belt clip
Antenna included
Power: Two 9-volt batteries

.......more details

40659R

Genie Universal 4-Button Remote

Pre-programmed settings and a unique programming feature give homeowners a simplified compact multi-door and gate option
Easy to set up
Compatible with most major brands sold in the USA including: Overhead Door Genie Chamberlain Craftsman Ryobi Sommer Linear MegaCode Marantec Wayne Dalton Liftmaster FAAC Xtreme

BPE-50

EMX Industries Battery Powered Through-Beam Photocells EMX-1500-1

Thru beam configuration
90° adjustment left or right
The transmitter and receiver use 12-24 VDC/AC but the BPE-50 can also be powered by two 3.6-volt lithium batteries (Batteries Included)
50 ft. operating range
Size: 4.4" (112mm) x 2.05" (52mm) x 1.3" (33mm)

PREM-SEL-MX-R16

Garex Ready to Install Door Special Order Premium Select MX R16

R16 Insulation - Mix of short and long panels - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - 7' to 9' wide doors will have 1 short and 1 long embossment - 10' to 11' wide doors will have 2 short and 1 long embossment - 12' to 18' wide doors will have 2 short and 2 long embossments - Composite end blocks eliminates corrosion and wood deterioation

CP-PW-NM-MCJH

Lynx Pocket Wheel for MCJH 6"x1" Bore Long Hub

SP-24

EMX Surface Mounted Loop Pad e/Wire Guard

Designed to fit between the guide rails in automated carwash systems.
Made with durable polypropylene this sealed pad can stand up to carwash detergents.
Able to detect up to 30 inches high when coupled with EMX’s line of vehicle loop detectors.
Size: 23.75” x 23.75” x 1”
Material: black polypropylene
Lead-In: 50 feet shielded twisted pair

.......more details

PUSH148

Manaras Contact Block NO

Same as ZEN-L 1111

.192_2-3/16_60L

Truck Door .192 x 2.188 x 60 CTD RAW LHW

.192 x 2-3/16 x 12'

MOTOR255

Manaras Electric Motor 3/4HP 120/240V 1PH

MI00018

Micanan Motor Pulley LD 4L 1.5" x 5/8" ID

Used on the motor shaft for a 4L v-belt.

MOTOR359

Manaras Electric Motor 1 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

41D8260

LiftMaster Cover 8355W

A one piece LiftMaster® "Silver" Replacement Cover.
For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers

27-83190

Truck Door W-Style Track and Operator 90 x 90 Door

Includes: 1 dual spring operator 2 horizontal tracks 2 vertical tracks

RP-MTR-AO-RSL-12

Lynx Electric Motor AO RSL 1/2 hp 120V *** No Longer Available

For residential opener MRE

Q238

LiftMaster Gate Adjustment Switch K75-50339

This replacement kit is compatible with the following models: CSW200 CSW200U CSW200UL ROBO SWING

MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

This will only work in the Pro LH operator.

834

Fasteners Open Eye Bolt 5/16 x 3-3/4 Zinc ***Sold Individually

H5NA12

Richards-Wilcox Hinge 5NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

RBH105L5-LH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

TRACK-SET-2STD-12

2" Tracks Set 12'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

TRANSF112

Manaras Transformer 575V-24V-50VA

GBUP312EF-1

Gate Roller 3-1/2" x 2-3/8" Polymer Sold Individually

Polymer gate roller with bracket for 3-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

GBU412EF-1

Gate Roller 4-1/2" x 2-3/8" Galvanized Sold Individually

Galvanized gate roller with bracket for 4-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

19-48055MB

LiftMaster Limit Chain Assembly #48 x 55

Fits the SL575 & SL585GL gate operators
Same as K19-48055MB

E/1929/071

Automatic Systems Round Arm Ass'y 16'-5" (BL229)

Used on the BL229 gate op.

E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

MA041

LiftMaster Mega Arm Tower Lock & Keys (No Dust Cover)

Comes with two keys

2510-527

Linear Motor Drive Inverter Assy 2HP 230V 3P

For model VS-GSLG-723

LPWKP-G

Linear MegaCode Wireless Keypad 318 MHz Cool Grey **** Replaced by NMTK

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

NICE-OVIEW

NICE Oview Display Programmer

�
Type: control programming and diagnostics unit for devices equipped with BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands modification or parameters and monitoring of diagnostic data
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Operating temperature: from –20°C to +55°C • Dimensions (mm): 107 x 61 x h 20 (with wall-mounting support: 125 x 70 x h 32)

.......more details

.192-2-L

Cut-to-Length Torsion Spring .192 x 2" Left Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

P-75H

End Plug for 3/4" ID Rubber Air Hose w/ Center Hole Qty 1

Sold per plug

144B18

LiftMaster Idler Pulley 2" OD 1/2" Bore

144B0018 is a idler pulley (2"OD 1/2"B) replacement kit. Compatible with Models ATS211 & ATS211R garage door openers. Check the manual for your specific model number before ordering.
Also known as: 144B0018 144B18

GATE-SP-ORDER

Special Order Gate

Made to customers specific requirements

RELAY026

Manaras Relay DPDT 120VAC

USVD-BD

EMX Board Only for Ultra Sonic Vehicle Detector

Replacement board only for USVD-4X

HW0429-RH

SteelCraft Commercial Bottom Bracket Right Hand Only

Right Hand bracket only
Can be used for both 2" and 3" tracks
To be used on door tracks that are installed wide enough to accomodate the side cable pulley
Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
Adjustable cable can level door from the ground
Heavy gauge steel construction

.......more details

3055

End Stile Keyed L-Handle With Locking Cylinder and 7-1/2" Latch Mechanism

ST101-INT-WHITE

Lynx Intermediate Panel White 10x24

MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.

41D0277-1

LiftMaster Transformer WiFi Battery Backup

For Wi-Fi Battery backup garage door openers; manufactured after 2011
Same as #204D0277-1

PRO-SD-10011-U-LH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Left Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

CGH751L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Damp Environment Modification

28-32082

Truck Door 2" Horizontal Track with 8" Radius 120" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

PRO-APTC-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

14219

Doorlec Disconnect Arm LJH

IRB-TX

EMX Industries Transmitter Board Only for IRB-4X *** No Longer Available

K001D7121-1

LiftMaster Main Board EL1SS

Replacement board only

2520-437-BT-YELLW

Linear Token Acceptor Yellow 12" x 10" Locked Outdoor Encloser

Available in Black White or Yellow
Stand not included

PRO-GH-7523U-R

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-4X_MOD_5HP

Micanan Nema 4X Modification 5HP

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
For 5HP motors

LMHS2475WPADA

LiftMaster Horn / Strobe 12/24VDC White W/NO

SOFT_EDGE-ENDCAP

Devanco Canada Soft Edge End Caps Sold Individually

PRO-HB-7521U-LH

Micanan 3/4HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

BEA-10T300PB

BEA Wired Transmitter Push Button No Case 300 MHz

��300MHz Analog Flag Connector Transmitter
For All Activation Plates Except Jamb and Vestibule 9V Battery
10 dip switch access code programming
Operating temperature: -10 to 55C

K71-D575-1

LiftMaster Drum Brake Kit 3 Ph 575V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

PRO-J-10023-U-LH

Micanan 1HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

MDT-1A

Linear 1-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming instructions

MK-00705

Micanan Harness 3-Phase 5-Relay Board

MK-00222

Micanan Transformer 460V-24V-100VA

MV-00003

Micanan 3-btn O/C/S Nema-1 Pushbutton Control Station

Surface mount

MK-00031

Micanan Transformer 230V-24V-40VA

SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

ME110-C

Miller Edge PVC Mounting Channel Sold by the Foot

7/8" length

PRO-J-10083-U-LH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

.363-514-L

Cut-to-Length Torsion Spring .362 x 5-1/4" Left Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.375-334-R

Cut-to-Length Torsion Spring .375 x3-3/4" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

PRO-J-5023-U-RH

Micanan 1/2HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5081-U-LH

Micanan 1/2HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

NUT-14-SS

Nut Stainless Steel 1/4"-20 Flanged Serrated Hex

.406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

PRO-TB-10021-U

Micanan 1 HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7511-U

Micanan 3/4HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5025-U

Micanan 1/2HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

1004-134-16'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 16 ft***Actual Length 16'2"****

For door thickness 1-3/4"

172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

Wall mounting
4:1 reduction
Maximum pull allowed on hand chain is 35lb
Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch

Sell sheet

STEELCRAFT_PANEL_SEAL

Steelcraft Intermediate Section Seal V-Bead Sold by the Foot

DJ501L5

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
DJ operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology
Security+ 2.0®

.......more details