Devanco Canada - Get The Right Garage Door Opener‎ and Parts

GTO-R5211

Nortek Retrofit Replacement Control Board Green

Replaces the R4211 replacement control board
Retrofit board with upgraded firmware that is compliant with UL 325 Version 6
Color is green
Compatible with the Mighty Mule FM500 & FM502
Compatible with GTO PRO 2000XL GTO PRO 3000XL GTO PRO 4000XL
Compatible with the old GTO PRO 2000 GTO PRO 2500 GTO PRO 3000 GTO PRO 4000 Swing Gate Operators

.......more details

XBA6

NICE LED Arm Light Kit 6M

510.2543.00

Whiting Narrow Mounting Angle for Posts Under 2-1/2" IN

This is an upcharge when ordering certain doors

BRAKEPART020

Manaras Brake Shoe Assembly Kit (SHOE021/022)

BT501L5-BQ

LiftMaster 1/2 HP 115/230V 1p Commercial Trolley Op. wi/ Brake and Slow Speed Mod Installed Logic 5

Low profile trolley operator with brake and slow speed modification installed
Comes with #48 roller chain

MP00215

Micanan Limit Shaft Assembly N1 H/J

MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.

VERMONT-R12

Garex Ready to Install Door Special Order

R12 Insulation - Short Panel with vertical lines carriage style - Panels are spaced to not allow for decorative handles - Decorative hinges can be used - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

URBAN-MR-R16

Garex Ready to Install Door Special Order

R16 Insulation - Narrow multi rib pattern - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

PREM-SEL-XL-R16

Garex Ready to Install Door Special Order Premium Select XL R16

R16 Insulation - Long Panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

20449R

Genie Chain Glide Rear Housing Cover

Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
Contains gear housing cover only

K77-16011

LiftMaster Hardware Kit for CPS N4

This is a replacement Sensor Hardware Kit only.

K107A0031

LiftMaster Replacement Keys (2) for KPW5 KPW250

Replacement keys only

2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

Torsion spring wire only
.135 wire size

K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

Compatible with LiftMaster® Model APT trolley Operator

21001

Limit Switch Micro

MA034RDOT

LiftMaster Articulating Square PVC Arm Kit Red/White with Retro-Reflective DOT Tape 9 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe
9 ft. x 2.5 in. square includes hardware kit (MA033)

Additional arm accessories

60-6550-C-BLK

Speed Bump Black 36" Econo Light Weight for Concrete ***NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

109290

Amarr/Alpine Snap Latch Supply Bag for 1 3/8" Thick Doors *** Price by quote only

Is needed when 105381: T-Handle Lock Kit for 1 3/8" thick doors are ordered or the lock won't work.

105381

Amarr T-Handle Lock Kit for 1 3/8" Thick Doors Black *** Price by quote only

includes exterior & interior locking device with keys
this item is requires for use with lock bar or cable snap latch components
Need to order 109290 which is the hardware needed for installation or the lock won't work.

7001-9-ANODIZED

Commercial Side & Top Weather-Strip 9' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-8-ANODIZED

Commercial Side & Top Weather-Strip 8' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

41A6689

LiftMaster Trolley Threaded Shaft D-Shape

For use with various LiftMaster® Belt Drive Garage Door Openers that utilize a T-rail.

LJH-353-3/4

Doorlec 3/4HP 575V 3PH Jackshaft Operator

Technical information

2524

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2524 for #2376 balancer

41A3473

LiftMaster Chain and Cable Kit 7'

Also known as: 65410 41A3473
One piece 7 ft. chain and cable replacement kit installed on 7ft garage door

SHAFT120

Manaras Input Shaft for OSHW

SPR41B14A410B32

Sprocket 41B14-410A32 x 3/4 K0 0S w/Ollite Bushing

H6NA12

Richards-Wilcox Hinge 6NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

CPT-223-50

Miller Edge Bulk Extrusion 50' roll

For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
Sensivity: 15lbs max activation
Lead wire 18"-22 gauge unversal
Wire configuration: N.O.
Electrical interface: sealed module- provides seamless connection to logic or relay type operators
ANSI/UL325 recognized component

.......more details

K20-1150C-2P

LiftMaster Electric Motor 1-1/2 HP 115/230V 1Ph TEFC

Replacement electric motor for SL595-15021 and SL595-15011 models

0/7530/249

Automatic Systems 5/8 Left Hand Rod End with Zerk

Used on the BL229 gate op.

MD00019

Micanan Sprocket 50B40 X 1" 1/4" KW 2SS 5/16

H14G02-BLACK

Hinge #2 x 14 gauge Black Powder Coated

Black powder coated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
Individually wrapped

BK149/PR-BLACK

Residential Bottom Corner Bracket RBB-75 Black Powder Coated sold as a pair

For use with 2" straight track
Individually wrapped

CAMPLATE001

Manaras Cam Plate GH Standard

REDUCER030

Manaras Reducer CC63-40D Frame 56

GAL.262-258-144R

delete

MOD130

Manaras Cogged V-Belt Upgrade

The standard v-belt is replaced by a cogged v-belt for added durability
Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
This is available only as an upgrade with the purchase of a commercial op.

2110-823

Linear Idler Assy Wheel with Bolt for 1/2hp SL Gate Op.

26CW14522-CUT

Truck Door Intermediate Panel (12" x Cut-To-Size) Painted White for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

30005

Doorlec Brake Solenoid 208V with wire leads

MT22-MON-GRY-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

CH503L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

1004-2-10'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 10 ft***Actual Length 10'1"***

For door thickness 2"

CP-CLH-58

Lynx Clutch Hub 5/8"

BCSI-HV-100-53

Industrial Slide Gate Operator Variable Speed 1 HP 600V 3 Ph with Heater ** Price by Quote Only

Heavy-duty alminum cabinet Nema 3R
Programmable logic controller
Adjustable friction clutch
Thermostat controlled heater
Opening / Closing speed of 24" / sec
Nema 4 control panel

.......more details

Installation manual Sell sheet Brochure Installation overview Dessin de installation Diagnostics and troubleshooting Diagnostics et dépannage

H-0168

Autogate VBelt Banded B-66

New Style Double Reduction

H-0166

Autogate VBelt Banded B-59

New Style Double Reduction

510.3920.05

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 5 Panels

Upgrade option

K72-13912

LiftMaster Clutch Shaft Kit T GH

PRO-GH-10081U-R

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

CM30E

Push-to-Exit Button Green

ME00054

Micanan Clutch (Input) Shaft Only for Pro-H/HHD N4 3/4" x 17-5/8" (3/4 HP-1 HP)

3/4" x 17-5/8"

2376.162_18.780

Whiting Torsion assembly .162 wire size 18" spring length 78" shaft

MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

Input / clutch shaft kit for MTH MTBH
For old MTH MTBH with 1" diameter input shaft no pulley included

2X6PO50

Devanco Loop 2 x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

R5207

Pulley 4" Zinc Plated Steel

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race

MD-00348

Sprocket 50B26 x 1" 1/4" KW 2SS

PRO-GH-10011U-L

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

PRO-GH-7543U-R

Micanan 3/4HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-X_MOD-5HP

Micanan Explosion-Proof Modification N-7/N-9 for 5HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

MAG-1

Magnetic Tool Box 3.5" x 3.5" x 5.25"

100lb. magnet which allows it to be easily stuck and removed from a metal surface.
Ideal for use on forklift

PRO-GH-5043U-R

Micanan 1/2HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5021U-L

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand (PRO GHE)

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

SPRING043

Manaras Compression Spring

Used on OSH OPH waterproof with brake

PRO-HB-5038U-LH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5025U-LH

Micanan 1/2HP 220V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

MOTOR281

Manaras Electric Motor TEFC 1 HP 208/480V 3PH for N4/12 Applications

Electric motor only- not wired
Continuous duty base mount 56Z

CAM012

Manaras Roller Cam Opera

PRO-H-5081-U-LH

Micanan 1/2HP 208V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters