Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MD00422

Micanan Lovejoy Rubber 3JE Sleeve

MK-00605

Micanan Double Limit Switch

WHITING-PANEL

Whiting Special Order Replacement Panel Only Price by Quote Only

Special order to customer's specs

VBELTB30

Manaras VBelt 5L 30" Type B (5L330)

For models OTH OTBH OSL
Same as 5L330

PRO-H-5011R-LH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Solenoid brake OPTIONAL

Installation manual Specification sheet

PRO-H-5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Solenoid brake OPTIONAL

Installation manual Specification sheet

PRO-H-5011U-RH

Micanan 1/2HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL14COP

26253

Doorlec Shaft 9-3/4" x 5/8" Keyed LJ / LJH

MT22-BLACK-U

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Universal Outlet

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

This limit shaft will work on all Side-Mount Doorlec Openers
Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread

MA024RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 12 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe

Additional arm accessories

MK-00398

Micanan Capacitor 370V 20 Mf

For limited duty 220V operators

MP00056

Micanan Track and #410 (#48) Chain for 12' h Door *Actual length 174"*

MK-00430

Micanan Capacitor 240V/250V 70 Mf

For limited duty 110V operators

MD00020

Micanan Sprocket 50B40 X 1-1/4"

DT3+1

Linear 3+1 Channel Transmitter 310 MHz

Activates one GRD gate receiver and up to three separate Delta-3 receivers
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 independent codes for gate + 64 multi-channel codes for doors (set by dip switches)
Frequency: 310 MHz

.......more details

Programming Instructions

MT22-MON-Y-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

.262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Red/Yellow

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

MCB-421-CONT

Lynx Heavy-Duty Chain Drive Trolley 3/4 HP 220V 1P Contactor Model

Heavy-Duty spur gear chain drive trolley

2806.192.340

Whiting .192 x 2-3/16 x 34" Roadside with Cones

.273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Orange/Red

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

MU22-2WIRE-E-G

Miller Edge MU22 2-Wire End Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MU22-2WIRE-LH-G

Miller Edge MU22 2-Wire Left Hand Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MU22-2WIRE-RH-G

Miller Edge MU22 2-Wire Right Hand Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

ST14COP

Copper Stop 1/4" 100 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL14COP

PRO-H-5053U-LH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

PRO-H-5053U-RH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

12131

Doorlec Brake Disc 4" x 5/8" Keyway

Fits Doorlec model SGOH

SPRING-SQUARE-W

Torsion Spring Square Wire Custom Order

Custom spring made to order

41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

A one piece travel module replacement kit.
Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
Same as 041D7742-5

PRO-H-7511E-LH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

PRO-TB-7553-U

Micanan 3/4HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks
Full function Smart 10.0 logic control board featuring on-board receiver
#41 roller chain drive
Solenoid brake standard
External radio control strip
Three button O/C/S control station Nema-1 included

.......more details

PRO-LT-5011-U

Micanan 1/2HP 115V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

PRO-H-7511E-RH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

PRO-HHD-7511E-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft NM ECB No Eyes Left Hand

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation

.......more details

Installation manual Specification sheet

2376.200.30.890

Whiting Torsion assembly .200 wire size 30" spring length 89" shaft

V-101-B

Vinyl Black Sold per Foot

Vinyl for 101-ALUM

MM00155

Micanan Disconnect Arm PRO-HR

.312-6-L

Cut-to-Length Torsion Spring .312 x 6" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

9150000626

3/32" Stops ONLY 100/pkg

Stops only 100 per pack

CB53205000-KOR

Cable 5/32" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized cable 5/32" 7x19 5000ft spool.
Cable break strength: 2800 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Stainless Steel Cable Specifications

MOTOR274

Manaras Electric Motor 3/4HP 575V 3PH

��This item is compatible with BRAKE011

K1A6426-2

LiftMaster Control Board for RSL12V / RSW12V ** USE K001A6426-2

510.2996.06

Whiting Steel Roller Upgrade Option for 6 Panel DF Door

Upgrade option only - must accompany a door order

43402

Carriage for R-99 Trolley

34104

Doorlec V-belt Pulley 7" x 5/8" bore

MK00713

Micanan 10K OHM 1/4W Resistor

Replaces MK-00694

COAX-RG6-ASBLY

Coax Cable Assembly Sold per Foot

Assembly includes union

CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

K32-10540

LiftMaster Gear Reducer 20:1 SL595

Same as 32-10540 32-55011 32-5501-1 G3255011

25-01064

Truck Door Stainless Cables 97" 1/4" eye 7x7 Pair for Roll-Up Doors ** To extent of inventory

Works with both Whiting and Todco doors
Cable size: 1/8 "
Nylon eye ends are used on 1/4" & 7/16" eye cables which give superiour strength and corrosion resistance

P220-1K

Heddolf 1-btn Transmitter 9-Dip Switch 318 MHz

318MHz single button 9 trinary dipswitch remote control transmitter
Compatible with Allstar and Pulsar
Compatible with P294-K receiver

CP-SP-DISCONNEC

Lynx Hoist Spring MCJH CP-SP-DISCONNECT

34101

Doorlec V-belt Pulley 9" x 5/8" bore

Fits model ETB-3

SPRING-DUPLEX

Special Order Duplex Spring Assembly

Customer made to required size

28-30080

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Curbside (RH)

Galvanized steel 14 gauge construction
For use with 1" diameter rollers
6" radius for smooth door operation
Track coupler used for proper alignment at track joints

28-01114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Curbside (RH) 120" Todco Style

For Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
Fits door sizes 101 - 114" high
Cross ref: T #49014-2 T #41034-2 & W #4045

PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

MI00001

Micanan Motor Pulley 5L 5/8" ID x 2" OD

PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

For door thickness 2"

GT751L5

LiftMaster Heavy Industrial-Duty Trolley Op. 3/4 HP 115V

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
24VAC/VDC
10' Long

E3JM-30FT

Omron Thru-Beam Photoelectric Sensor Nema 4 0-30ft Range

Easy-to-wire terminal block
Built-in timer offers selectable ON-delay OFF-delay and one-shot
Relay or transistor output models
Light-ON/Dark-ON operation switch selectable
Model: E3JM-10M4-US

225-120R

Electraray Rotating Warning Light Red 120V

Incandescent warning light
90 flashes per minute
Operating temp. 31 to 150 degrees fahrenheit
Height: 7-1/4" Diameter: 5-1/2"
Enclosure rating: Nema4X

38066R

Genie Series II Intellicode Wall Console GBWC2-BX ** Disc. replaced by 39165R

Series II Multi-Function Wall Console (White Color)
Vacation Lock button disables remote access
Light Control Button
This item has been discontinued and replaced by #39165R

IRB-RET

EMX Industries Universal Retroreflective Photoeye Nema 4X New UL325-2016 *** To extent of Inventory

Type B1 non-contact sensor
UL 325-2016 compliant
Operating range up to 60 ft. (18.3 m)
NEMA 4X enclosure
Sensitivity adjustment: potentiomete
Mounting bracket and reflector provided

.......more details

Installation manual Sell sheet

PP12X34.5

Base Plate 12" x 34 1/2"

12"x34.5" Base Plate Stainless Steel

110925

Allstar MVP-QC 3-Btn Quick Code Transmitter 318 MHz *** Discontinued

Compatible with all MVP receivers and operators
Quik-code programming no dip switches
Operate LED
Visor clip included
Power: Two 2032 batteries
Codes: 19683

.......more details

Programming instructions

XP4040CUSH689

Heavy Duty Door Closer

Heavy Duty Door Closer with Spring Cush-N-Stop Arm

BOARD075M

Manaras Replacement Board Kit (Monitoring)

Includes BOARD70MR and BOARD66R
On-board 390MHz radio receiver accepts 50 remote controls

28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

Kit includes part # 28018A and # 28019A
Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
Includes 1 Belt Bullet and 2 Retainers

1104-9FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

VL-450-LED

Versa Light Dock Light Model 450 LED 42"

Easily Positioned
Durable Construction
Shock/Vibration Resistant
Fan Cooled
Circuit Breaker Switch
Grounded Plug

.......more details

Q013

LiftMaster Idler Pulley K75-50090

Toothless idler gear for use on SL 3000 operators
Includes bolt and sleeve.
Dimensions: 3.5" diameter 1-3/8 wide with 1/4 off set total width 1-5/8 with 1/2" x 2-7/8 bolt idlers sold individually

37302R

Genie C-Channel Belt Extension Kit for Silent Max and Quiet Lift models ** Price by Quote Only

The extension kit for C-channel belt drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door
For Genie silent max 1000 and quiet lift 1200 belt-drive garage door openers only

.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

8L5-OCS

Devanco O/C/S for 8-Doors L5

Compatible with all Liftmaster Logic 5 Commercial and MAXUM operators
Works with the 850LM and 860LM receiver to control OCS on 8 doors
also will do Open/Close for 24 doors.
5.5" length x 3.25" wide x 1.25" thick
Splash-proof

Programming Instructions Instructions de programmation Sell sheet

2376.206.35.930

Whiting Torsion assembly .206 wire size 35" spring length 93" shaft

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

K1D6761-1CC

LiftMaster Logic Board AC

MGH-6115-ECB-RH

Manaras 1.5 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation manual Sell sheet

FRONTIDLER010

Manaras Front Idler Assembly #41

FRONTIDLER007

Manaras Front Idler Assembly #48 (#410)

60-7241

Standard Caution Sign French 12" x 24"

108D36

LiftMaster Light Lens (K108D0036-2)

Compatible with one light operators
Compatible with the following Liftmaster models: 1040 1045 1055 100WD 200WD 1140 1145 1155 110WD 210WD3 1240 1245 1255 215WD 15WD 1240R 1245R 1255R 985 1046 1146 1246 1246R 1056 1156 1256 and 1256R
Compatible with the following Chamberlain models: 2000 2100 and 2200
Dimensions are 7-1/4" wide X 4-3/4" high X 3" deep

PW-110

Devanco Power Wipes Heavy Duty Dual Sided Cleaning Towels 110/Bucket **NLA

These towels have an abrasive side for tough scrubbing and a smooth side for delicate surfaces.
They are loaded with commercial grade cleaning power and won't dry out like the competition
110 double-sided 12" x 8" towels Citrus scent
Safer than harsh thinners or gasoline
Use on nonporous/nonabsorbent surfaces to include: all metal surfaces sealed wood equipment vinyl and ceramic tile.
We recommend testing on plastics rubber and latex paint in inconspicuous areas before use.

.......more details

Safety data sheet Fiche de données de sécurité

CHW401-T/FORCE

Chain Hoist Wall Mount 4:1 2000R Torque Force (126654)

4:1 Reduced drive
Sprocket: 41B36 Bore: 1"
Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
Cross Reference: 2000R OMI 4006

Drawing Sell sheet

.312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"