Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SOLID_SHAFT_24'

Solid Shaft 1" Keyed 24 ft Galvanized

  • Maximum length for a solid shaft is 24ft
  • Actual length is approx. 24'-1"
39934S

Genie Res. Wall Mount GDO w/ BBU Smart Pkg 6170H-B

  • Heavy-duty jackshaft lifting forces is employed with this new design but modified for residential setting and smoother operartion.
  • The Aladdin Connect smart-garage app comes standard on the 6170H-B logic module
  • Fast set-up and compatibility with Alexa and Google Assistant devices.
  • App available on iOS and PlayStore.
  • Open close get notifications for and set time alerts for your garage from any capable mobile device!
  • Shows usage reports on up to 20 users. Set pre-determined open close times. No monthly subscription fee!
    • .......more details
Manual (EN/FR)Sellsheet
28-30080

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Curbside (RH)

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
  • 6" radius for smooth door operation
  • Track coupler used for proper alignment at track joints
PRO-LT-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
32-48-100

Extension Spring 8' Door - 100 lbs Tan ** Replaced by 27-48-100

  • Double - Loop
  • 32" long 48" stretch 100 lb load
  • Springs sold individually
Spec Sheet
PRO-GT-5083-U

Micanan 1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
CABLE012

Manaras Brake Cable 7x7 1/16 x 16" w/Stop

  • Comes with cable stop on one end
K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

  • For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
  • Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.
K72-12507

LiftMaster Clutch Shaft Kit (3/4 & 1HP)

  • Clutch Shaft Kit 3/4 & 1 HP Trolley operators
  • Complete with: Clutch Plate Clutch Shaft Bearing 3/4' I.D. Sprocket 41B10x3/4' 5L Belt Motor Pulley Spring Clutch Disk Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener
Installation manual
NEW-HAMP-R16

Garex Ready to Install Special Order

  • R16 Insulation - Short Panel with vertical lines carriage style - Panel spacing to accomodate decorative hinges and handles - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
R125USB

Erone Card Enrolment Unit

  • Simply present the badge in front of the unit and the code is transmitted into the PC in the cardholder file.
  • The R125USB is used to quickly add cards to the system.
  • USB communication port connection
Wireless System Chart
CPT-223-50

Miller Edge Bulk Extrusion 50' roll

  • For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
  • Sensivity: 15lbs max activation
  • Lead wire 18"-22 gauge unversal
  • Wire configuration: N.O.
  • Electrical interface: sealed module- provides seamless connection to logic or relay type operators
  • ANSI/UL325 recognized component
    • .......more details
MK-00172

Micanan Non-Resetable Analogue Counter 24V

  • Monitors door cycles
.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

  • Deluxe Wall Console for Genie Intellicode Series II only
  • 3 function console: operates door opener controls lights and security lock out switch
  • Compatible with Code Dodger
  • Same as previous part number: GPWC-2WLB
H12G04-SS

Hinge #4 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
.283-514-L

Cut-to-Length Torsion Spring .283 x 5-1/4" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
MX00037-120V

Micanan Brake Assembly for PRO-J/H 120V Solenoid included

.437_3-3/4"-RH

Torsion Spring .437 x 3-3/4" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 3-3/4"
  • Length: 12 ft
358.000-PANEL

Whiting Bottom Panel White Aluminum Clad

  • Comes complete with #77W Lock
  • Actual replacement for Intercontinental-Winnipeg s/n 51617
SLT17-20

Rolling Steel 2" Flat Slat 20-ga Galvanized

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
    • .......more details
.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
OTBH-6233-1-CON

Manaras Trolley Operator 3/4 HP 208V 3 Ph Contactor Model

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation manualSell sheet
25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

  • Double - Loop end for strength
  • 25" long 42" stretch 260 lb load
  • Sold individually
  • Rated for 10000 cycles
9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

OSH-6534-ECB-LH

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
60-7248-689E

Wheel Chock Safety Pkg incl'd: pryamid chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 68-9E Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Handles for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 9" long x 6" high
PRO-J-10023-U-LH

Micanan 1HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
OTBH-6233-1-ECB

Manaras Trolley Operator 3/4 HP 208V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
EHJ-311-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 115V-1Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
.406_5-1/4"-RH

Torsion Spring .406 x 5-1/4" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 5-1/4"
  • Length: 12 ft
2200-027

Linear Chain #41 Master Link

050DCRJB3MC

LiftMaster Receiver Logic Board DC. WiFi HD RJO

  • Security+ 2.0 Receiver Logic Board Replacement Kit
  • For use with the LiftMaster® 98032 Heavy Duty Residential Jackshaft DC Wi-Fi® Garage Door Operator; powered by myQ® and manufactured 2024 to present
  • The unit will feature a yellow circle learn button
6X26PO50

Devanco Loop 6' x 26' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
2807.200.280

Whiting .200 x 2-3/16 x 28" Curbside with Cones

24040

Doorlec Roller Chain #40 Sold per Ft

SW-500-ADAPTER

Devanco Industrial Spring Winder 500 for 3.75" - 6" Adapter for Richard Wilcox Torsion Spring Plugs

  • Adapter for SW-500 to be used with Richard Wilcox spring plugs
  • This adapter is 5 mm higher than the universal model
1224-1-3/8"-BLK

Elton Commercial Window for Flush Doors 1-3/8" thick 1224 Black Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
JHDC7S1BE

LiftMaster MAXUM Jackshaft 1/2HP 120/240V 1PH DC Operator 30 Cycles/Hour 700LB long output shaft

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
TDC22X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 2200LB

  • Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
  • Faster Speed - Average of 12” per second opening on sectional doors.
  • Battery Backup Option - (battery backup kit sold separately).
  • Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
  • Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
  • Drive Type 65:1 Gearbox with #50 Chain Output
    • .......more details
D4-12

Extruded Bumper Black 12" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
D4-18

Extruded Bumper Black 18" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
LJH-353-1-RH

Doorlec 1 HP 575V 3PH Jackshaft Operator

  • Model LJH lasts an average of 10 million cycles
  • Available with ⅓ HP to 1 HP single-phase or three-phase motor and is equipped with self-adjusting solenoid brake
  • LJH installation is universal regardless of side (left or right)
  • Speed is approximately 1.4 feet per second or about 0.3 meters per second
  • Comes equipped with a manual chain hoist
1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

K10-10371

LiftMaster Straight Door Arm

  • Also known as: 105368 10-10371
  • For use with various LiftMaster® Commercial Door Operators; manufactured prior to 2005 only
2500-1495

Linear Pushbutton Stop/Reset

2806.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 34" Long
  • Roadside
  • For Curbside order part # 2807.177*340
63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

  • Compatible with the 746 and 844 motors
  • Replaces discontinued FAAC Part; 7580375
2110-274

Linear Clutch Shaft Assembly HSLG UPS

WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

  • Upgrade option
SW-500

Devanco Industrial Spring Winder 500 for 3.75" - 6" Torsion Springs

  • W-500 is an Overhead Garage Door Torsion Spring Tensioning Tool for commercial and industrial sectional doors with springs ranging from 3.75" to 6". It can accommodate both 1.0 and 1.25 diameter shafts. This device prevents work-related accidents and significantly reduces physical strain during the torsion spring cranking process The SW-500 is designed for use with a cordless drill (Non-impact) with a 13mm socket to make the job faster and safer than using winding bars. ***Richard Wilcox springs require the SW-500-ADAPTER. Technical Specifications:
  • Weight: 8.6 kg / 18.9 lbs
  • Length: 77.2 cm / 30.39 inches
  • Max. Torque: 369lb/ft
  • RPM: 500-2000
  • Material: Aluminium steel plastic
    • .......more details
Sell Sheet
MC271-2MON-RH-GY

Miller Edge MC271 2-Wire Monitored Right Hand Gray Includes End Flaps - Sold per Foot

  • Ideal for Cornell double angle bottom bar
  • Flexible and will conform to floor irregularities
  • Optimum size for 2+ inch thick surfaces
  • Custom manufactured to user specifications for color length and outlet location
  • 5-inch end flaps create a complete seal and can be trimmed for custom fit
  • Sealed assembly impervious to dust and debris
    • .......more details
OPH-6232-M-N1-LH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes Left Hand

  • Monitored version with Nema 1 photoeyes
MOTOR318

Manaras Electric Motor 1 HP 120/240V 1Ph

  • Continuous duty C-flange TEFC 60Hz
2376.200.35.930

Whiting Torsion assembly .200 wire size 35" spring length 93" shaft

K17-36530

LiftMaster Gear Reducer and Motor Pulley

  • Includes gear and reducer pulley motor pulley
  • Includes dual-set screw fastener
  • Groove-lock channel on each pulley
  • For LiftMaster CSL Series commercial slide gate operators
112357.0002

Overhead Logic Board for RSX 1/2HP 1PH

  • Fits OPRSXH75015BR
112357.0004

Overhead Logic Board for RSX 575V 3PH

  • Fits OPRSXH75015BR
MGH-6215-M-N1-RH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
3257

Whiting General Purpose Bottom Seal #80841

  • Quote required prior to sale to ensure correct fit
7131

Whiting Brush Side Seal Assembly; 7/8"

  • Quote required prior to sale to ensure correct fit
CP-LEV-BRAKE

Lynx Brake Lever

WB-660

Skylink Wireless Wall Console w/ Auto Close for ATR Garage Openers

  • For use with the Skylink garage door openers.
  • Oversized Push Button for activating the garage door opener.
  • Activate opener light on/off and the light will remain on until the button is pressed again.
  • Feature with Lock function to ignore all radio signals for added security.
  • Illuminated LED indication.
  • Easy to Install.
    • .......more details
15-41B18LGH

Sprocket 41B18T 1" Bore

  • Also known as: 155016 41B18
  • 18 Tooth Sprocket #41 Chain (41B18)
  • Includes 2 Set Screws
801-300-002-01-REFURB

Refurbished 801-300-002-01 Unit

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

  • Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H
DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

  • Sold in increments of 5ft to a max of 25ft
DC300-75-1-WP

Dyna-Hoist 300 Series Direct Drive BBU 3/4 HP 110/240V 1" Shaft Weather-Resistant ** Quote Only

  • Special-Order. Price by Quote Only
  • Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
  • The 300 series also works with and powers 12V automatic lock systems
  • Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
  • Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
  • 30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering
    • .......more details
SUPPORT014

Manaras Board Snap Locking Support 7/16" ** Special Order Only

51-013611

Blue Giant Sensor Wand Flat 21 inch **Special Order

  • Price by Quote Only
028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

  • Price by Quote Only
CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

MOD151

Manaras 1-1/4" Output Reducer OGH 1/2 to 1HP

  • Add-on to a OGH operator
P-8833T

Pulsar 3-btn 3-Door Transmitter 108817 318 MHz

  • Allstar compatible
  • Three channel transmitter
  • 8 dipswitches 318 MHz
27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

  • Frame size is 56C
PRO-HBH-7521U-L

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
10-10354

LiftMaster Brake Release Arm

  • his is a replacement Brake Release Arm. For use with various LiftMaster® Commercial Door Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
  • Also known as: 106106
OSHW-6112-M-N4-R

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
15-80B60YMP

Sprocket 80B60T 2.0B 2X 1/2-13"

  • Also known as: 158060
GAREX-WINDOW

Garex Thermos Made-to-Order Size Special Order

  • Special order to suit customer's needs
12-10883

LiftMaster Nylon Bearing Kit Low Friction 1/2"ID x 1"OD

  • 1/2" ID x 1" x 1" OD
  • Same as K12-10883 1210883
D800-120-1

Cable Drum High Lift 800-120 1" HL Pair

  • Adjustable cable attachment with screw
  • Made of aluminum
  • High Lift capacity: 120" max
  • Flat capacity: 266" max
  • Rating: 2200 lb per door max
  • Keyway: 1 KW of 1/4" width
    • .......more details
TS-1-183-GALV-KEY

Tube Shaft 1" x 183 (15'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
TS-1-135-GALV-KEY

Tube Shaft 1" x 135 (11'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
425-0090

RW Hanger 70 Flush Pull Steel Sold Individually

  • Formed Steel construction
  • Face: 7" H x 4-1/2" W
  • Pocket: 4-1/2"H x 1-3/8"W x 1-1/4"D
1-0242

RW Stay Roller 68 Nylon 2-1/2" Dia

  • Special Order item
  • Reverible and adjustable for doors 1-1/2" to 3" thick
  • Steel frame Zinc plated finish
461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

  • Used with #7-6095 rollers
  • Replacement for #75x14g
E/BLOP/116

Automatic Systems Anti-Corrosion Base

31226

Doorlec Sprocket 41B48-1" shaft

SPR50B42X138

Sprocket 50B42 1-3/8" KW 2SS 5/16-18

  • 42 tooth sprocket for #50 chain
BEA-35-1566

BEA Power Cable RS-20US IS40

  • Replacement power cable only 35.1566
  • Replaces 35-1195
  • RS-20 US-Colored. Cable gland M16
ME210-C3

Miller Edge Black Rigid PVC Mounting Channel "L" Shape Sold by the Foot

  • Used on CPT-210 extrusion
CAPAC

LiftMaster Smart Access Hub

  • LiftMaster’s Smart Access Hub provides communities an affordable cloud-based option to monitor and control access points without needing to upgrade the entire system
  • Multiple-Entrance Control with myQ Community.
  • Flexible Connectivity Options - Ethernet Wi-Fi Cellular.
  • Universal Compatibility – Flexible connection options to control up to 4 access points (vehicle pedestrian amenity gates door strike or maglock).
  • Full Cloud-Based Management– For up to 50000 user and event history per unit.
  • Remote Programming and activity monitoring using myQ Community.
    • .......more details
K76-34697-3

LiftMaster APS Encoder with Harness 12V

  • For use with various LiftMaster® Commercial Gate Operator Models such as RSL12UL
RDRG63.3.1-1:1/2

Maximum Output Torque Generated Chain Hoist Rolling Door w/4B60HD-1:1/2K3/8-2S5/16SQ ** Spec Order