Devanco Canada - Get The Right Garage Door Opener‎ and Parts

BCSI-PM07

Pivin Drapeau Lock Washer 3/8" *** Price by Quote Only

110968.001

Overhead Door Limit Shaft Kit RMX

OGH-6535-M-N1-LH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

SHAFT048

Manaras Trolley Output Shaft

BEA-35-1242

BEA 30' Harness 8-Conductor LZR

Power cable LZR-I100

MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

For trolley operator

OGH-6535-M-N1-RH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

10TD900HH3

BEA 3-Button Transmitter 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
Operating temperature: -10 to 55C
IP65

GAREX-PAINT-IRN-ORE

Garex Touch-Up Paint Iron Ore

MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
Output: N.O. N.C
Wire connections: Integral 18” wiring with #6 spade lugs
Antenna: Attached wire or F connector
LED Indicators: Power channel 1
Polycarbonate enclosure

.......more details

B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

LEDSTRIP004

LED Light Strip (1 Unit) Red/Green/Blue 96" 24VDC

An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option

Installation Manual

20102

Doorlec Reversing Arm Spring

E/BLOP/123

Automatic Systems 3 Kits of Two LED Lights on Arm Option

Increases visibility of the arm on BL229 gate operator

10-BR2900

BEA 2 Relay Logic Module + 900MHZ Wireless Technology

2 relay logic module ideal for applications requiring sequencing of electric locking devices and automatic door activation.
Day/Night mode allows users to designate "secure" or "unsecure" access for controlled entry points.
Push plates with wireless transmitters can be programmed to operate during specific time periods.
Programmable transmitters per receiver: 75 (unlimited for universal timer)
Input: DRY contact
Temperature rating: -22 to 158F

.......more details

SHAKER-XL-R16

Garex Ready to Install Door Special Order

Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
Panel Width: Up to 24 feet (732 m)
Texture: Woodgrain
Offered in various choices of colours

SPR50B42X114-3/8

Sprocket 50B42 1-1/4" shaft 3/8" KW 2SS 5/16-18

42 tooth sprocket for #50 chain

MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

CORNELL-RS-DOOR

Cornell Rolling Steel Door Made to Order Price by Quote Only

MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

BOARD076R

Manaras Replacement Power Board

Used on all Manaras circuit board type operators

OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake optional **
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

SPR50B54X1

Sprocket 50B54 for a 1" Shaft

GALV-393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

GALV-375-334-R

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-375-334-L

Cut-to-Length Torsion Spring .375 x 3-3/4" Left Hand Wound Galvanized Yellow/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

CLM125-H

Linear Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

LA400XL20W

LiftMaster Single Arm Solar Package for LA400 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA400DC)

Kit Includes: LA400DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA400DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016

99119671-PER-FOOT

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Amarr Residential Open Back Doors and Classica models

GALV-250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

GALV-243-334-R

Cut-to-Length Torsion Spring .243 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

CPT215-END-KIT-T2

Miller Edge End Kit for CPT215 10K Ohm Resistor (T2) Configuration

Kit contains: (2) Caps (2) cages (1) wired plug (1) 10K plug (1) non-mon. plug (2) screws
No glue is required

CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws

CPT215-PER-FOOT

Miller Edge Field Configurable Sensing Edge Cut-to-Length

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Minimum Length: 3ft

.......more details

T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
For use with specific Torque Force chain hoists ie 200R (244687)
This chain will NOT work in the hoists that use the 30.7-19-5 chain
works with Micanan / Nice Commercial operators

GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

This is a Whiting original roller

DOCK-SEAL-R100

Dock Seal R-100 Fixed Header Seal Price by Quote Only

Made to order - Price varies according to specifics
This model is ideal for door openings of 8′ wide x 8′ high
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time

.......more details

210339

Skylink Belt Gear with Holder LQ-803

GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

GALV-262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

GALV-234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

041-0400-000

LiftMaster Door Shaft Collar

Fits with LiftMaster model #98032

10SSTI

BEA Active Infrared Presence Sensor

Active infrared sensor for industrial environments.
Applications: automatic industrial doors gates and automation.
Uses triangulation to detect presence of an object eliminating false detections caused by varying ground conditions.
Can be mounted on stationary or moving objects.
Can be used individually or daisy-chained with up to 8 other modules.
Can be used on narrow and wide doors.

.......more details

BL229-EX1929-D45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Right Hand

GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

K41-0383-000

LiftMaster Toroidal Transformer 1200lb / 120VAC-240VAC

For Maxum ops

GALV-283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

K41-0410-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Hoist

For Maxum Hoist 1200 Op

K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC) for Maxum Operators

For Maxum op

K41-0380-000

LiftMaster Bridge Rectifier 700/1200

For Maxum ops

K41-0381-000

LiftMaster Toroidal Transformer 700lb / 120VAC-240VAC

For Maxum ops

K41-0374-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 700)

Maxum J-700

K41-0378-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 1200)

Maxum T-1200

GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

GT103L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 208/230/460VAC 3PH

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

CP-PU-AWNING-1

Lynx Awning Pulley 1" MCJH

GX-200

Garex Ready to Install Door Grooved Special Order

Panel height 18* 21 and 24 inches (45 53 and 60 cm)
Panel width 1 ⅜": Up to 18 feet (548 m) 1 ¾": Up to 28 feet (853 m)
Door Thickness 1 ⅜" (3493 mm) / RSI 211 (R-12) 1 ¾" (4445 mm) / RSI 281 (R-16)
Windows 1 ⅜": Standard injected frame (1520 or 1542) 1 ¾": Standard injected frame (24x12 or 40x13)
Metal Thickness 26 ga Steel : 047 mm (00185 in) 23 ga Aluminum : 061 mm (0024 in)
Insulation: High-density polyurethane meeting the highest environmental standards

.......more details

CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
Chain Spreader for Maxum for 1" door shaft