Devanco Canada - Get The Right Garage Door Opener‎ and Parts

218189-01

Linear Trolley Assembly

4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1003-2-14'

Aluminum Bottom Retainer L-Shaped 14' Long

For 2" thick doors.

1003-2-10'

Aluminum Bottom Retainer L-Shaped 10' Long

For 2" thick doors.

1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

For the temporary repair of a broken spring.
Wire size: .3175 - .3625

7001-7-WHITE

Commercial Side & Top Weather-Strip 7' Long - White 7001-WW (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

32-48-140

Extension Spring 8' Door - 140 lbs Blue ** Replaced by 27-48-140

Double - Loop
32" long 48" stretch 140 lb load
Springs sold individually

Spec Sheet

25-42-180

Extension Spring 7' Door - 180 lbs Gold

Double - Loop
25" long 42" stretch 180 lb load
Sold individually
Rated for 10000 cycles
Same as part number 118

Spec Sheet

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 98" Spring Length: 60" Wire Size: .243
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire
Heavy-duty cast aluminum cable drums hold up to 130" of cable

.......more details

27-20126

Truck Door Spring Spacer 33" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

26-94325

Truck Door Bottom Panel with Seal (15" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

Z9403

Coupler 1" Bore Adjustable

Malleable Iron for strength
Set screws and jamb nuts installed
1" bore with 1/4" keyway

SF258

Spring Fitting 2-5/8" Pair

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .3310".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
Winding bar hole 1/2"

.......more details

CB3160500

Cable 3/16" 7x19 500' Galvanized

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs

Comparison charts

RN0024

Roller 2" Nylon 4" stem Black

Black Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.75"
Box qty: 250 Box weight: 58.2 lbs (2-4 Black Nylon)
No bearings in head

BK021/PR

Commercial 3" Safety Bottom Bracket ** Indef Delivery

Maximum cable diameter: 1/4"
Maximum door weight: 1650 lbs Zinc
Plated Steel
Sold as a pair

BK258/PR

End Plate 2-5/8" flanged with bearing 13GA Sold as a Pair (L & R) (EBF 258)

Sold as a pair
Box quantity: 30

25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

Unplated shaft 10 roller ball design
Shaft Length: 6.5" Overall Length: 7.5"
Long stem roller has a staked collar design versus machined collar on others.

1104-9FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 9' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

LM4AH-12

LiftMaster Battery 4.5AH 12VDC

Designed to fit Fire Fly III Plus Model of Release Device
12 Volts 4.5 AHR (amp hour rating)
Dimensions: 4" Depth 2-3/4" Length 3-1/2" Wide

MR00008

Micanan Disconnect SASH Chain Sold per Pack of 10'

420001

Linear Wireless Keypad Multi-Code 300 MHz

Compatible with 300 MHz Multi-Code receivers
4-digit access code
Backlit keys
Weather-resistant keyless entry station transmitter
Easy access to battery
Power: 9-volt battery

.......more details

029-98090

T-Style UDI Replacement Door White Stainless Steel Pkg 029-98090

For openings within 98" w x 90" h
Hardware attached balancer assembly not included
Manufactured to exact size

MS-00006

Micanan Trolley Track Set 12 Ga. 16'6" (for 14' h. door) Includes 2 Angles Only

Set includes 2 tracks only
Chain NOT included

MOFT20-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Transmitter

Maximum sensing distance is 20 meters
11-pin
Waterproof for harsh environment i.e. water dust steam etc.
To be used with amplifier series S142.
Supplied with 15 m of shielded cable.
For receiver unit order part no. MOFR-M14-8.

.......more details

Installation Manual

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

27-24301

Truck Door Single Torsion Spring Assembly 89.5/48 for Todco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 89.50" Spring Length: 48" Wire Size: .243
Right hand wound
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire

.......more details

65-92131

LiftMaster Dual Aux Trolley Mod. M15 #41 Chain for 12ft High Door

Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
Includes up to 12ft of tracks
For H/J/GH

PRO-TB-5053-U

Micanan 1/2HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

SSZP19-1

Solid Shaft 1" Keyed Zinc Plated 19'-1"

B025

Rolling Steel Assembled Angles 2" x 2"x 3/16" Sold per Foot

Includes angles astragal and 1/2 slat

SSZP8-6

Solid Shaft 1" Keyed Zinc Plated 8'-6"

DM54-COATED

Special ends 2023-07-31

Cable Drum High Lift 54" 5250-54 Specialty Coated Pair

54" High Lift aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH.
Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
Rated lift per drum: 500 lbs
Maximum cable diameter: 3/16"

.......more details

766

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/2" 1000/Box

Full length thread
Max torque = 6

WA7102

MBAR Security Key for Manual Over-Ride (1 Key)

OSH-6434-M-N1-LH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

OGH-6536-M-N1-RH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

XF600VAC12

LiftMaster 600V Transformer Kit 1200

For use with various LiftMaster® MAXUM Series DC 1200 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators

REEL-30

Take-Up Reel 3-Wire Metal 30ft Extended Black

3- wire 18-gauge
Also called Reel Cord

OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

OPH-6214-M-N1-LH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

DW-HOSE-CONN

Copper Air Hose Connector 3 x 22mm with Collar *** To Extent of Inventory

For use in DW-3S and DW-TR air switches

2704.177_13.5

Whiting Roadside Torsion Spring 2-3/16" ID 13-1/2" Long

Torsion spring wire only
.177 wire size

TDC1222-18

Liftmaster Commercial 18FT Trolley Angle set (10-5818-P) and #41 chain pack (TDC41-18) ***Actual length 251"***

Double Angle Rails for doors up to 16'6" high
Includes #41 chain pack

TDC7-16

Liftmaster Commercial 16FT Trolley Angle set (10-5816-P) and #48 chain pack (TDC48-16) ***Actual length 227"***

Double Angle Rails for doors up to 16'6" high
Includes #48 chain pack

K177A0112

LiftMaster Trolley Spring

Also known as: 177A112 62274 177A0112 062274 132C2180 177A78

GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

11.7135

Whiting Horizontal Track 2" x 135" L 6" Radius Roadside 1 Piece

1 roadside horizontal track

IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
The IRB-4X2 will work with any control board that accepts dry contact on the input.
The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
*Not for use in applications requiring UL325 compliance
Thru beam design is not affected by shiny surfaces
Wide 24˚ transmission angle allows easier alignment and increases reliability

.......more details

Spec sheet

59206

Todco Operator Bearing Shallow Header Roll Up Door

41151R

Genie Light Kit Wall Mount

Bluetooth Light Assembly for the Genie #6070 & 6170 Wall Mount garage door opener.
Replacement light kit for 39945R

BEA-35-1555

BEA 50' of Cable Only for LZR Widescan

Optional 50 ft cable for use with the LZR-WIDESCAN

2100-529

Linear Woodruff Key #15 1/4 x 1"

15055

Doorlec Electronic Thermostat 330V B1 Metal

MPB-3

Doorlec Open Mushroom Stop Lockable Close Push Button Station

Green (Open) Red (Mushroom Stop) Black (Close) push-button station

MT21-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Yellow Left Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

TSTL

EMX Test Loop

Electrical diagnostic tool for loop and vehicle detectors
Two-wire: red and black
Dimensions: 1.25 inches (H) x 1.25inches (W) x .75inches (D)
Compatible with most brands of loop detectors

K20-3100M-5-H25

LiftMaster Electric Motor 1 HP 575V 3P L5

For use with various LiftMaster® Logic 5.0 Commercial Door Operators and Slide Gate Operators.
Also known as: 20-3100M-5 K20-3100M-5

PHOTO-073

Manaras Non-Monitored Intrinsically Safe Retro-Reflective Photocell 30' Range incl. 3" Reflector

Retro-Reflective photo cell

CHAIN061

Manaras #410 - 1R26P (Incl. 1 C/L) 13" Long

FRONTIDLER006

Manaras Front Idler Assembly #41 Very Heavy Duty

MOD073

K19-40720D-NP

LiftMaster Chain #40 Nickel Plated 30ft

Inclueds (3) Master Links.

GALV-363-334-R

Cut-to-Length Torsion Spring .362 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

TRACK003

Manaras 1 Piece Galv Track 2x2x12'6 ** 1 pc Only

2 pices are required to make 1 set of tracks
Does NOT include the chain

O02R2401

AirLift Op. Retaining Rod Complete 8ft Std Op. ** Price by Quote Only

SETR2641AM1AN-C

Erone 2-Channel Mini Transmitter Grey 433MHz Proprietary Encoding

Heavy-duty construction
Elegant & easy to carry
Light grey and blue base with grey buttons
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

Used on the BL229 gate op.

DC1000-125

Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only

The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
Comes with integral absolute encoder to control the door travel
24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Nema 4 photocell

.......more details

K76-34644

LiftMaster APS Encoder 24V

Compatible with various LiftMaster® Commercial Swing Gate Operators

GALV-234-2-144-R

Galvanized Torsion Spring .234 x 2" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

185002

Marantec Maveo Bluefi Stick

The maveo bluefi stick brings Wi-Fi connectivity to your residential garage door openers via phone app or the Internet
Compatible only with: Synergy 200 and 300 series IP20 Bluetooth 4.2 also known as 187141 with manufacture date after March 2022.
NOTE: Operators manufactured before March 1 2022 require a control board upgrade in order to be compatible with Maveo products and UL 325 unattended operation. (available soon)

LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

OSH-6533-M-N1-LH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

CRBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

CRBH755L5-LH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MQ00011

Micanan 3/32" Aluminum Oval Sleeve Sold per Unit

DC750-100

Dyna-Hoist DC Series Direct Drive Opener 3/4 HP 110/240V 1ph ** Price by Quote Only

Direct drive operator with a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 0.75 HP 90 V DC 1750 rpm motor 110 to 240 V 1 PH and 60 Hz power supply.
Integral absolute encoder to control the door travel
24 V 7 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Pulse with modulation programming to provide soft-start soft-stop dynamic brake and speed control

.......more details

D-2-5

Keyed Disconnect Device 5ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

GDI-HB311

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft UL-325 Photo Eyes Extra

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

GDI-HB330

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

GH303L5-RH

LiftMaster Gearhead with Brake 3 HP 208/230/460V 3-Phase Logic 5

Includes CPS-U photoeyes

DISCONNECT008

Manaras HDW Brake Release MTBH

K94-37695

LiftMaster Electric Motor 1/2HP

Replacement motor for SL585503U

K41-0245-000

LiftMaster BLDC Power/Motor Drive Board IHSL24UL

Replacement Brushless DC Power/Motor Drive Board Service Kit
Compatible with the following models: INSL24UL INSL24ULMC

SF375-S

Spring Fitting 3-3/4" Stationary Side Only Long Ear 1" Bore

Universal thread for use in either LH or RH wound springs.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

050ACTBMC

LiftMaster Receiver Logic Board AC WiFi

050ACTBMC is a replacement Bluetooth® Enabled Receiver Logic Board Kit
For use with various LiftMaster® and Chamberlain® Wi-Fi® AC Belt Drive and Chain Drive Garage Door Openers manufactured 2011 to 2022 only.
The unit will feature a yellow learn button
Also known as: 1D8088-1 050ACTWFMC 050ACTWF 1D8808-3 041D80881D8088-1 50ACTWF 050ACTBMC 50ACBL1 50ACBL2 50ACBL3 50ACBL4 50ACBL5 50ACCL1 50ACCL2 50ACCL3 50ACCL4 50ACCL5 50ACBR1 50ACBR2 50ACBR3 50ACBR4 50ACBR5 50ACCR1 50ACCR2 50ACCR3 50ACCR4 50ACCR5

P-639T

Pulsar 3-btn 9-Door O/C/S Transmitter 318 MHz

Allstar compatible
Wall mount
OPEN-CLOSE-STOP 9 doors
8 dipswitches 318 MHz

Programming instructions

P-8833TC-OCS

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

Allstar compatible
OPEN-CLOSE-STOP 3 doors
8 dipswitches 318 MHz

Programming instructions

Q003

LiftMaster Chain Tensioner Bolt w/2 nuts K07-50637

This replacement kit is most commonly used to tighten the attached chain on the sliding gate

MP00224

Micanan Track and #41 Waterproof Chain for 7' h Door

For 3/4 & 1 HP Micanan trolley operators

ZAP-8830

Zap Battery Backup 8030/8830

8830 Battery Back up systems allows operation of the operator during power outages.

ZAP-8825-3-HPB

Zap 8825-3-HPB Series-3 Super-Drive Industrial Duty DC Op

Motor and controller: Continuous duty rated DC Motor with controller producing a powerful soft start/soft stop output of 2000 Newtons of force to drive commercial sectional doors while reducing mechanical impacts that cause premature wear of door components
NEMA 4X rated controller case: ZAP Controllers and push buttons are NEMA 4X compliant as a standard
Wiring type: C2 (factory default) B2 failsafe is standard with the addition of approved photo eye.
Radio control and external receiver terminals: Terminal strip provided inside the controller to provide quick convenient connections for adding external radio control receivers from any desired manufacturer

MB-01303

Micanan Electric Motor Only 3/4HP 110V 1PH 3-Wire Base Mount FR56

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

ZAP-800-3-PB

Zap Control Box Assembly for ZAP800

C-20X14-134-W-OLD

Thermal Window 20" x 14" for 1-3/4" Cedo Original White Old Style

For 1-3/4" thick door
Old style with round screw heads
Glass Dimensions: 17-3/4" x 12-11/32"
Hole Size: 18-3/4" x 13-3/8"
Exterior Frame: 19-3/4" x 14-3/8"

1-0316

Richard-Wilcox 22 x 31 Track Bracket Double Zinc Plated

1/2" clearance needed between doors. Maximum door thickness of 2"
Weight: 3.5 lbs
Capacity: 400 lbs 500 lbs
Material: Formed Steel 3/16" thick

MRIN

LiftMaster Base Riser Mount for industrial operators

Works with LiftMaster IHSL24UL and INSL24UL slide gate operators
Provides a base-mount option instead of post-mounting the operators

Installation manual Manuel d'installation Retrofit guide Guide d'installation

LVB820-11/P1

Laminated Bumper Black 8" Projection Vertical Installation 20" x 11" Sold Individually Style P1

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login