Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

  • Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
  • Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
  • Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
  • Dimensions: 6.15” x 4.13” x 4.74”
LB710-14

Laminated Bumper Standard Black 10" x 14" 7" Projection Horizontal Installation ** Special Order

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
2200-968-UPS

Linear Sprocket 40B22 1" Oxided UPS

GALV-375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
50450

Doorlec Mushroom Push-Button Red for 3-Doors

  • Capable of opening three doors
  • NEMA 4 Enclosure
GALV-218-2-144-L

Torsion Spring .218 x 2" x 12ft LH Galvanized Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-2-144-L

Torsion Spring .243 x 2" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-334-L

Cut-to-Length Torsion Spring .363 x 3-3/4" Left Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
GEAR014

Manaras Disconnect Bevel Gear 5/8" 20 Tooth OGH

B680H

FAAC Barrier Gate System ** Price by Quote Only

FAAC-SPEC-ORDER

FAAC Special Order Gate Product Price by Quote Only

  • Ordered to customer's specs
227967

Linear Door Arm Bent LCO75

OPJ-6114-M-N1

Manaras Heavy-Duty Jackshaft Op 1 HP 120V 1PH Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
SETR2641AM1AN-C

Erone 2-Channel Mini Transmitter Grey 433MHz Proprietary Encoding

  • Heavy-duty construction
  • Elegant & easy to carry
  • Light grey and blue base with grey buttons
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart
GHW-311-1HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1 HP 115V 1P with ECB

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
BEA-10-WBA

BEA Universal Mounting Bracket

  • Extendable from 15.35" - 23.62"
  • -90 to 90 degree tilt range
  • Self Drilling screws provided
  • Carbon Steel Black Powder Coated
Installation Guide
E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

  • Used on the BL229 gate op.
DC1000-125

Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only

  • The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
  • Comes with integral absolute encoder to control the door travel
  • 24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Nema 4 photocell
    • .......more details
Pulse Series Installation ManualsDC Series Brochure
NO_REFLECTOR

Garlo Gavazzi No Reflector Required

HAE00058

Linear LDCO Encoder Board

1031-100

Whiting 2" Vertical Track 100" L

MGH-6236-M-N1-RH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
REDUCER008

Manaras Reducer CC80-40D FR 182TC (40:1)

  • For 3 HP motor
LVB620-11/P1

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB620-11/P1
185002

Marantec Maveo Bluefi Stick

  • The maveo bluefi stick brings Wi-Fi connectivity to your residential garage door openers via phone app or the Internet
  • Compatible only with: Synergy 200 and 300 series IP20 Bluetooth 4.2 also known as 187141 with manufacture date after March 2022.
  • NOTE: Operators manufactured before March 1 2022 require a control board upgrade in order to be compatible with Maveo products and UL 325 unattended operation. (available soon)
CHAIN050

Manaras #410 - 1R42P (Incl. 1 C/L) 21" Long

LA400CONTUL

LiftMaster Standard 24VDC Control Box for Single and Dual Gate Applications Batteries Incl. UL325

  • Complete control box for new LA400U 2018 UL325 compliant
  • Includes box control board and batteries.
OSH-6533-M-N1-LH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
DM54-COATED

Cable Drum High Lift 54" 5250-54 Specialty Coated Pair

  • 54" High Lift aluminum die cast alloy.
  • 3/8"-16x2" hardened cup point set screws installed with red heads.
  • Color coded: Red-LH and Black=RH.
  • Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
  • Rated lift per drum: 500 lbs
  • Maximum cable diameter: 3/16"
    • .......more details
CP-SH-34-16-1212

Lynx Complete Clutch Shaft Assembly for CDJH

  • 3/4" -16 x 12.50"
CB14B0250-KOR

Cable 1/4" 7x19 250' Galvanized Supreme

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
MQ00011

Micanan 3/32" Aluminum Oval Sleeve Sold per Unit

DC750-100

Dyna-Hoist DC Series Direct Drive Opener 3/4 HP 110/240V 1ph ** Price by Quote Only

  • Direct drive operator with a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 0.75 HP 90 V DC 1750 rpm motor 110 to 240 V 1 PH and 60 Hz power supply.
  • Integral absolute encoder to control the door travel
  • 24 V 7 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Pulse with modulation programming to provide soft-start soft-stop dynamic brake and speed control
    • .......more details
Pulse Series Installation ManualsDC Series Brochure
D-2-5

Keyed Disconnect Device 5ft Cable

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
GDI-HB311

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft UL-325 Photo Eyes Extra

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
GDI-LG910

GDI Jackshaft & Trolley JDMG-LG-2030 Nerma 1 UL325 Photo Eyes Extra

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
MSJ-6113-M-N1-RH

Manaras MSJ 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 35 cycles per day > 150 cycles per day
    • .......more details
PD1614B000

NICE Aluminum Flange Bar 300MM Insert For MBAR up to 7M

OSH-6532-M-RH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored No Photoeyes

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
MILLER-LEAD-WIRE

Miller Edge Up-Charge for Custom Length Lead Wire Sold by the Foot

  • Up charge for extra lead wire
P-831T

Pulsar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming instructions
3-4742

Serco Lip Assist Bar ** Price by Quote Only

  • For Serco loading docks
3-4734

Serco Bell Crank ** Price by Quote Only

  • For Serco loading docks
41D0598-1

LiftMaster U Bracket Adaptor

  • Also known as: 062314 12D598-1 12D598 41D598-1
  • For use with various Chamberlain® Belt Drive and Chain Drive Garage Door Openers and square rail assemblies
15-50B12QGH-1

Sprocket 50B12QGH

  • Also known as: 1550B12QGH 15-50B12QGH 15-50B12QGH-1
DS200-MINI-STORE

Wayne Dalton Mini Storage Door ** Price by Quote Only

  • Mini Storage Door Made to Order
K41-0258-000

LiftMaster Idler Bracket Repl. Kit IHSL/ INSL24UL

  • Idler Bracket Replacement Kit. Compatible with LiftMaster® IHSL24UL & INSL24UL Series Industrial-Duty and Lite-Duty Commercial Slide Gate Operators
4580-304-KYNAR/GY

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Kynar Grey 458-97 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
R1P

Erone Radium + Paradox 1-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
Wireless System Chart
210-0053

TNR Doors CurtainLok Ass'y Kit UHMW-PE 5/pr per Kit (10pcs) ** Price by Quote Only

  • 5 complete curtainlok's with fasteners
  • Curtain Lok™ for 1/4” thick Rubber Doors
4580-304-PEBL/KAKI

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Pebble/Kaki 458-17 *** To Extent of Inventory

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
1016-ADHSVE-CAULK

Adhesive for Storm Shield Caulk Tubes 10.3oz

  • For use with 1016
OPH-6433-ECB-LH

Manaras Opera-H 3/4HP 480V 3Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
CBC316-SMALL

Thimble 3/16" - 100 per pkg (Size Small)

BCSI-HV-100-23

Industrial Slide Gate Operator Variable Speed 1 HP 208V 3 Ph with Heater ** Price by Quote Only

  • Heavy-duty alminum cabinet Nema 3R
  • Programmable logic controller
  • Adjustable friction clutch
  • Thermostat controlled heater
  • Opening / Closing speed of 24" / sec
  • Nema 4 control panel
    • .......more details
Installation manualSell sheetBrochureInstallation overviewDessin de installationDiagnostics and troubleshootingDiagnostics et dépannage
WASHER035

Manaras Belleville Washer 31.5 x 16.3 x.08mm Zinc Plated

  • Used on serveral models
041-0191-000

LiftMaster Cover Light Silver

  • LiftMaster® "Light Silver" Replacement Cover
  • For use with various LiftMaster® Belt Drive Garage Door Openers featuring myQ® technology and Bluetooth® capability; manufactured after 2021 only
  • This replacement part is compatible with the following models: 84501 84501-267 84602
CAPACITOR024

Manaras Capacitor 250V 70 uf 50/60Hz

  • For limited duty 110V operators
MOD027B1

Manaras Universal Aux. Output Module B070 Red/Green 24V Modification

  • MOD027B1 modification only when bought with operator
  • Order MOD027B1 when ordered in conjunction with a commercial operator
  • Works with BOARD070
OSH-6534-ECB-LH

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
02-411

LiftMaster Pull Switch Assembly Nema 4

  • May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
  • In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
MD-00142

Sprocket 410B17 3/8" Bore NO KW 2SS

21-7575-1

LiftMaster Transformer 575V 3 PH

  • For use with various LiftMaster® Logic 5.0 NEMA 4 and 4X Commercial Door Operators
O02R9211

AirLift Metering Screw

D029

ODCC Fire Door Adjusting Wheel

PRO-GHC-15011U-L

Micanan 1.5 HP 115V 1P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
HCT12

LiftMaster HCT Rail Only 12'

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
  • Will open a standard sectional door 11'6" high
210-0057

TNR Doors CurtainLok Kit HDXL9 5/Kit (10 pcs) ** Price by Quote Only

  • Natural UHMW-PE 5 Lok's
  • Sold as a kit of (5) complete loks that require 2 curtain loks and 2 screw (10) of each piece for 5 loks
CAPXM

LiftMaster Smart Video Intercom

  • LiftMaster’s cloud-based video intercom for multi-tenant residential properties.
  • The intercom allows residents to see their visitors through live video and grants access to the building via the MyQ app
  • Display and interface – 7” color display with touchscreen
  • Connectivity – WiFi cellular wired high-speed DSL
  • Audio capabilities – Voice over IP – digital call quality with no long-distance charges
  • Video capabilities – One-way video calling with a 135-degree view
    • .......more details
461-0004-12

Richard-Wilcox #31 Square Track 12ft Length Sold per Piece

  • Used with #7-6095 rollers
  • Replacement for #75x14g
19-40100-SS

Roller Chain #40 Stainless Steel 100ft Pack

  • 100ft length Stainless Steel
CDJH-423-ECB-RH

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 208/220V 3 PH with ECB Right Hand UL325

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
LRS-FP-50

EMX Sensor Flat Pack 50ft Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes sensor and 50 ft of lead wire
    • .......more details
LRS-FP-100

EMX Sensor Flat Pack 100ft Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes sensor and 100 ft of lead wire
    • .......more details
LRS-DB-100

EMX Direct Burial Sensor with 100 ft Lead Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes direct burial sensor and 100 ft of lead wire
    • .......more details
MP00389

Micanan Brake Connection Kit (wires and connectors)

  • Includes: wires outer lumunum flexible conduit and connectors
  • used when adding a brake kit to an operator
MH00002

Micanan Mild Steel Bushing 9/32" ID x 13/32" OD x 1-1/16" (Brake Option) *** No Longer Available

C-34X16-134-W-G/T

Thermal Window 34" x 16" for 1-3/4" Door White Frame Grey Tint Glass

  • For 1-3/4" thick door
SPR50B18X1

Sprocket 50B18 1" shaft 1/4" KW

  • 18 tooth sprocket for #50 chain
EHJ-353-1

Doorlec Industrial Jackshaft Op. 1 HP 575V-3Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
GH-353-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
GH-353-1

Doorlec Industrial Gearhead Door Operator 1 HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
GH-343-1

Doorlec Industrial Jackshaft Door Operator 1 HP 460V 3-Phase

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
OVERLOAD003

Overload Reset 3-Phase 1.8 - 2.6 Amps

15450

Doorlec Tubular heater 120V for Gate Operators

B/CDJH-12-115-ECB

Lynx CDJH HD Jackshaft with Solenoid Brake 1/2 HP 115V with ECB UL325

  • New LX100 circuit board.
  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Solenoid brake optional **
  • Fully driven adjustable limit switches.
    • .......more details
MGH-6534-ECB-RH

Manaras 1 HP 600V 3P Jackshaft ECB Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
O02R9502

AirLift Rebuild Kit Orig. Op. w/Brass Nut

STRUT-2-1/4-14'

Door Strut 2-1/4" Hemmed 14 ft Long

  • Reinforcement bar 2-1/4"
  • Galvanized
BCH501L5-RH

LiftMaster Hoist Op. with Carwash Mod.and Brake 1/2 HP 115/230 VAC Logic 5 Right Hand ***Replaced by CRBH501-RH

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes and brake
23105

Doorlec U Bracket Control Cabinet Support - Rear

  • Works with various models such as ETBHW ETHW
MOTOR276-WIRED

Manaras Electric Motor 1HP 575V 3PH Wired for ECB/Brake

OTBH-6232-AM-ECB

Manaras Trolley Operator 1/2 HP 208V 3Ph Monitored Elect. Circuit Board Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
OTBH-6112-AM-ECB

Manaras Trolley Operator 1/2 HP 120V 1Ph Monitored w/Eyes ECB Apt. Model

  • A premium low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 30 cycles per hour 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 chain on all APT models
  • TTC standard on all models with BOARD070
    • .......more details
SP-LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Special Coded **Must provide FC & Start #

  • Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
  • Can be used for larger vehicles with higher cabs as vans various trucks
  • 20-25 foot detection zone
  • Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
  • Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
  • Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed
    • .......more details
SGP-353-1-575/3

Doorlec Gate Master 1 HP 575V/3P with Heater

  • Post mount heavy-duty industrial slide gate operator
  • Max. gate weight: 2500 lbs
  • Gate travelling speed: 45 ft / minute
  • 175 watt heater included
G-10X7-134-W

Thermal Window Clear 10" x 7" for 1-3/4" Garaga Door White

  • For 1-3/4" thick door
02-101

LiftMaster Single Button Nema-1 Pushbutton Control Station

  • Surface mount
LEVER091

Manaras Open Limit Actuator

LDC801

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail (LDCO801)

  • The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
  • DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
  • Optional Battery Backup available for added peace of mind. Sold separately
  • Low-power standby mode dramatically reduces energy consumption
  • Supplies 800 Newtons of lifting force for heavy doors
  • Compatible with belt-drive or chain-drive T or I beam rails up to 10'
    • .......more details
Remote compatibility chart