Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
HAML-RCH-2030

GDI Direct Drive HC410 Nema 1 To Accept 1" Shaft; UL-325 Photo Eyes Extra

G3243

GDI Battery Backup Option G3243

  • BBU option if AC power is lost
19-48055MB

LiftMaster Limit Chain Assembly #48 x 55

  • Fits the SL575 & SL585GL gate operators
  • Same as K19-48055MB
E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

2100-564

Linear Clutch Disk Facing HSL HSLG

22010

Doorlec 1-22mm Cylinder Complete with Normally Open Contact Spring Return Includes 2 keys

22010-UNCUT-KEY

Doorlec Un-Cut Key for 22010 Sold Each

MA041

LiftMaster Mega Arm Tower Lock & Keys (No Dust Cover)

  • Comes with two keys
HAE00012

Linear Motor Cover LDO50

  • Replacement motor cover only
OSH-6813-ECB-LH

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
GAL.262-258-144R

delete

2110-823

Linear Idler Assy Wheel with Bolt for 1/2hp SL Gate Op.

SABLOP/12X

Automatic Systems Red LED Lighting Module for Arm

CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

M15A

Safety Inertia Brake 2" Bore 13727 Torque PCM15AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 2" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
ManualTechnical dataSell sheet
P-75H

End Plug for 3/4" ID Rubber Air Hose w/ Center Hole Qty 1

  • Sold per plug
BTN-8L5-RD

Devanco red replacement button for 8L5-OCS

  • red replacement button for 8L5-OCS
MX00128

Micanan Clutch Assembly for PRO-GOHD

XBA13

NICE Rubber Impact Red Protection Strip 9M/Pkg

WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

1004-2-14'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 14 ft***Actual Length 14'2"***

  • For door thickness 2"
DHJ501L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Left Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
SF175-S

Spring Fitting 1-3/4" Stationary Side Only 1" shaft

BK009

Commercial Top Bracket Adjustable 1-Bolt Tall Sold per Piece

  • Zinc plated
  • 12 gauge roller carrier and base plate
BCSI-PM12

Pivin Drapeau Clutch Disk for BCSI Gate Operator ** Price by Quote Only

  • Phenolic Friction Disc
BCSI-PM10

Pivin Drapeau Clutch Plate for BCSI Gate Operator ** Price by Quote Only

  • Friction Plate
MT22-GRAY-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MT22-MON-GRY-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
RP-BRK-WALL

Lynx Wall Bracket RSI

GATE_RN3.5

Nylon Gate Roller for Cantilever Gate

1004-2-12'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 12 ft***Actual Length 12'2"***

  • For door thickness 2"
CP-CLH-58

Lynx Clutch Hub 5/8"

CP-CLUTCH-D-58

Lynx Clutch Disk 5/8"

SS-STRUT-16

Strut Stainless Steel 2-1/2" x 16ft 16-Ga

MA012

LiftMaster Cam Arm with Magnet

  • Cam Arm for Liftmaster Mega Arm gate op.
MP00227

Micanan Track and #41 Waterproof Chain for 12' h Door

Q210

LiftMaster Gear Box Kit #70 K75-50224

  • For use with various LiftMaster® Commercial Swing Gate Operators manufactured after 1997
K1A6408

LiftMaster APE Kit 24V

  • For use with various LiftMaster® Swing Gate and Slide Gate Operators
Q170

LiftMaster Control Box Cover HCT K75-50190

  • Replacement Control Box Cover Q170.
  • Compatible with LiftMaster® Model HCT Overhead Gate Operators
BEA-10-1311

BEA Adaptor Plate Kit for Widescan

1004-134-14'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 14 ft**Actual Length 14'2"***

  • For door thickness 1-3/4"
VPL-12

Autogate 12V Motor

CAP425

Capacitor 125VAC 425MFD

  • Motor Start Capacitor 125V 425 MFD
K72-13912

LiftMaster Clutch Shaft Kit T GH

3BXL

Control Station Exterior Surface Mount O/C/S N4 with Key Lockout

  • Metal Enclosure
  • Buttons aligned in a triangular pattern
  • H=4-3/8" W=4-1/8" D=2-5/8"
3BXL
41D9202

LiftMaster End Panel Driver Board ** Discontinued

  • 041D9202 is a Front End Panel with LED Light Connector/Driver Board Replacement Kit.
  • For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
  • Compatible with the WLED model
SCLUTCHSHAFTN4

Micanan Complete Clutch Shaft Assy for PRO-HW

K75-50932

LiftMaster Crank Housing Kit - Hand Crank Not Incl. **DISCONTINUED

  • SL3000 new style hand crank pocket to store hand crank (crank sold separately)
PRO-GH-10081U-R

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
PRO-GH-10081U-L

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
MP-00072

Micanan Jackshaft with Auxiliary Trolley Assembly 14' High Door #41 Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • Operator must be supplied with reversed limits
  • For models: PRO-J H HHD GH GHC
1005-1-1/2-14'

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-1/2"
MO00027

Micanan Clutch Spring 0.218 x 0.812 x 1" 4 Coil Zinc

28-32082

Truck Door 2" Horizontal Track with 8" Radius 120" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
88573

Marantec Relay Power Board for M4500 Models

  • Same as # 83364
2806.148.200

Whiting .148 x 2-3/16 x 20" Roadside with Cones

CM30E

Push-to-Exit Button Green

PRO-APTC-5053-U

Micanan 1/2HP 575V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
33102

Doorlec Overload 1.20 to 2.00 Amps

MP00130

Micanan Up-Charge Track and #41 Chain for 14' h Door PRO-APTC

  • For 1/2 HP Micanan trolley operator PRO-APTC
210109

Skylink Pulley Assembly - Chain

25-01426

Truck Door 1/8" Stainless 97" 1/4 eye 7x19 Pair for Roll-Up Doors

  • Works with both Whiting and Todco doors
  • Nylon ends are used on 1/4" eye cables
PPLK1

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0â„¢ Gate Operators
OSH-6212-ECB-LH

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
ARMP5

LiftMaster DC Power Supply for Intercom/Maglock *** to extent of inventory

93D341

LiftMaster Cover Only Silver for EL25

  • Also known as 041D0341 41D341
  • Replacement cover for EL25
MOTOR272

Manaras Electric Motor 1/2HP 600V 3PH

  • Continuous-duty base mount ODP 60Hz •This item is compatible with BRAKE011
GH-6533-0000-CBOX

Manaras Control Box for GH 600V

  • Control box only
PRO-GH-7543U-R

Micanan 3/4HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-7523U-L

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-GH-7523U-R

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
PRO-X_MOD-5HP

Micanan Explosion-Proof Modification N-7/N-9 for 5HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
PRO-4X_MOD_3HP

Micanan Nema 4X Modification 3HP

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • For 3HP motors
111421.0004

Overhead Limit Module

.437-514-L-C

Cut-to-Length Torsion Spring .437 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.393-334-L-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.363-6-L-C

Cut-to-Length Torsion Spring .362 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.363-334-L-C

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
.343-514-R-C

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
.331-6-R-C

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
.331-334-R-C

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.331-514-L-C

Cut-to-Length Torsion Spring .331 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
  • For spring filler use part no. SPRING-FILLER
.331-334-L-C

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.319-514-R-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.319-6-L-C

Cut-to-Length Torsion Spring .319 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-600-Installed
.319-514-L-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.319-258-R-C

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
.312-514-L-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.312-258-R-C

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.312-334-L-C

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.306-6-R-C

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.306-6-L-C

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.306-514-R-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.306-514-L-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.306-334-L-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.306-258-L-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.295-6-R-C

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
.295-514-L-C

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.295-334-R-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.295-258-L-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED