Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
.312_6"-RH

Torsion Spring .312 x 6" x 12ft RH Yellow

  • Wire size: .312
  • Inside diameter: 6"
  • Length: 12 ft
.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
19-50ML

Master Link #50

  • For #50 chain
  • ANSI Standard Carbon Steel
T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 2-buttons provides control for 2 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
H14G01

Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #1 position
  • Use between sections 1 and 2 or in the center position
  • Same as part number 241
    • .......more details
SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse latched or timed relay output
  • Power requirements: 12/24Vac/dc
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
    • .......more details
Instruction ManualSell SheetWireless System Chart
CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

  • Reversing contactor with 24V coil
  • Same as part # LC2K12107B7
  • Demensions: 3.5" long x 2.25" wide x 2.25" high
  • Use 03-8024K as possible replacement
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
1920

Whiting Top Closure Mounting Plate for Insulated Doors

217436

Linear Drive Sprocket - Chain (HCT)

300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
300BH

3" Heavy Brush Insert 8ft Long

  • Polypropylene bristles
  • Same as model MS1712
4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

  • For angle application (180 degree)
  • For use with Light Brush or Vinyl Insert
4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
1003-3"-200FT

Bottom U-Rubber 3" Black 200' Long

  • 200ft spool of vinyl insert.
1004-2-24'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 24 ft***Actual Length 24'4"***

  • For door thickness 2"
1003-2-10'

Aluminum Bottom Retainer L-Shaped 10' Long

  • For 2" thick doors.
1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
1104-16FT-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-3
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

  • Allows for easy door operation.
  • Seal protects cargo area from dirt and moisture
  • Will not bunch up as bottom panel goes around top curve.
  • Co-extruded using rigid PVC backing with flexible PVC seal against the door.
  • For use with right angle vertical track
  • Fits only right angle vertical track assembly.
    • .......more details
26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
H11G10

Hinge #10 x 11 gauge

  • 11 gauge # 10 hinge - 0.92 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
25-10050

Truck Door Center Hinge Zinc for Todco Roll-Up Doors

  • Zinc plated Steel construction
  • Cross Reference: T #61196 T #59126 W #4012 220100
4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
DL-4000-8

Dock Leveler Retainer Galv. Steel Weldable 8' Long

  • Weldable to sides of dock leveler
  • Use with 4007 aluminum retainer & light brush (not included).
  • Vinyl insert slides into this outer retainer.
27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 98" Spring Length: 60" Wire Size: .243
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
  • Heavy-duty cast aluminum cable drums hold up to 130" of cable
    • .......more details
T755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Operator Logic 5 ***No Longer Available

  • Low profile trolley operator with brake included
Installation ManualManuel d'InstallationSell sheetBrochure
BC096.2

Whiting ColdSaver Door Bright Stainless Steel Clad

  • Include: Track Balancer Standard Hardware and side top & bottom seals.
  • Replacement for Utility Trailer s/n CS39865
PBTL-3

Exterior 3-Btn O/C/S Control Station with Key Lockout Nema 4

  • Surface mount
  • Metal enclosure
  • Dimensions: 7" H x 2-3/4" W x 3-1/2" D
Sell sheet
PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

  • Upgrades added when purchasing a commercial operator
IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

  • Two sets of screws are required for each bracket installed
.312-2-5/8-LH-C

Torsion Spring .312 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 2-5/8" Length: 12 ft
.295-6-L

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
LMTBU

LiftMaster Monitored Through Beam Photo Eye Nema 4X ** To exent of inventory

  • Meets 2016 UL 325 requirements
  • Long Range powerful beam provides reliable performance.
  • Sensing distance up to 90 ft.
  • Anti-Fogging Lens
  • NEMA 4X rated
  • Wireless network mode eliminates the need to wire between operators in dual-gate applications.
    • .......more details
15-48B18LGE

LiftMaster Sprocket 48B18 1"x 1/4"

  • Also known as: 15-9004 1548B18LGE 159004
20111

Doorlec Cam Retainer Plate Springs *** Replaced by 26117

  • Works on GH/GHX
37520

Doorlec DC-2000 Electronic Circuit Board UL325 Requires Monitored Photocells

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • 1 = Stop. 2 = Com. 3 = Open 4 = Close
  • Can be adjusted for constant pressure
    • .......more details
MOD163A

Manaras Heater in Reducer & C-Box 120V-1P 24VAC 15W + 30W

  • This modification is an option when ordering a commercial operator
1104-16FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Dark Sandstone (DDG)

  • Sandstone rigid vinyl retainer with dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
SOLARKPB

Erone Keypad and Multi-Technology Proximity Reader (125kHz)

  • The SOLARKPB is a black proximity card reader and keypad geared with a high performance read range
  • This device is equipped with Wiegand technology and gives visual feedback through its multi-colored LED’s.
  • Sealed in epoxy this multi-technology reader is compatible with most popular 26-bits Wiegand card encoding
L955W

LiftMaster Multi-Function Control Panel Secuirty+ 3.0

  • Includes a large push bar for garage door opener operation and a light control button.
  • Built-in learn button enables fast & easy programming of remotes keypads myQ® accessories and Wi-Fi garage door openers.
  • Compatible only with LiftMaster Security+ 3.0â„¢ garage door openers.
  • Warranty: 1 Year
Installation ManualManuel d'InstallationCompatibility Chart 2025Comparison Chart 2025
A10U49

Erone Long Range UHF Reader U4GO 33FT

  • The readers which operate with AES128 encryption offer secure access in settings like parking facilities gated communities campuses hospitals and more
  • Stand-alone or Wiegand mode
  • Up to 33' (10 m) read range
  • Detects vehicles up to 50 mph (80 Km/h)
  • Includes receiver power supply and mounting bracket
1-0199

RW Hinge 700 03 x 7 18" (36" Open) Black

  • Straps: Formed steel 3/8" thick x 2-1/2" wide (basic width)
  • Pin: 3/4" dia steel Zinc plated. Pin loose with cotter pin
  • Bearings: 2 hardened steel disc bearings
  • Finish: Complete hinge black enamel
  • Fasteners are not included
2300-925-BLACK

Linear Operator Cover Only Black

  • The Linear 2300-925-BLACK is a replacement black cover for the following series of gate operators: SWR SWC and SWD
  • Made of Polyethylene
201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

C12

Felco C9 Cable Cutter 3/8" Capacity

  • The FELCO C12 a two-hand wire and cable cutter designed for precision.
  • Made with unbreakable forged aluminum handles and high-quality hardened steel blades
  • The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
  • Length: 19.69 in
  • Weight: 3.75 lb
  • Cutting diameter: 0.47 in
    • .......more details
OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
BL229-L-SPP-5M

Automatic Systems Round Arm Left Sol 1 16'5" (5m)

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • C/W BL229 Left Sol1 Round Arm 16'5 Safety Edge Red Arm Lights (2 sets of lights)
H11G09-SS

Hinge #9 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
TDC41-10

LiftMaster Trolley Chain Pack #41 1200/2200LBS 10ft Door

  • Chain pack only
  • TDC41-10 is a #41 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 10' commercial doors
BCSI-PM22

Pivin Drapeau Hex Bolt 3/8-16" *** Price by Quote Only

B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

  • 3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
K41-0254-000

LiftMaster Electric Motor IHSL24UL

  • Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
  • Compatible with the following models: IHSL24UL IHSL24ULMC
SPBCU1

NICE MBAR/LBAR R10 Logic Control Board

RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
19-50HL-SS

Half (Offset) Link #50 Stainless Steel

  • For #50 chain
MA005C

LiftMaster Slip Clutch Option Mega Arm

  • This is a replacement slip clutch option for Mega Arm gearbox
GALV-250-2-144-L

Torsion Spring .250 x 2" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GD-STEND-24D-2

End Cap Steel 16G 24" Double 2" Thickness

  • Galvanized Steel 16-ga (1.42mm) thick.
PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
HAE00052

Linear Main Cover LDCO

  • Replacement cover only
Replacement Parts List
29120

Doorlec Transformer 120V pr 28 V. sec. 50VA

  • 120V primary 28 V secondary 50VA
GEAR001

Manaras Bevel Gear GH/MGH 5/8" 20 Tooth

2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

GLASS-ONLY

Elton Sealed Glass Only Clear Made to Order Quote Only

  • Thermal replacement glass only
11442

Limit Switch w/Roller Wheel Lever for MBAR

  • Used on M7BAR Ops
400BL

4" Light Brush Insert 6ft Long

  • Polypropylene bristles
GALV-262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
RS36203

Roller 3" Steel Roller Head Only Heavy-Duty 6203 Bearing 5/8"

  • Steel Roller Wheel diameter: 3"-C 6203 bearing
  • Roller Head Only
BEA-10FALCON-EX30

BEA Falcon Motion Detector w/Exp Proof Housing 30ft Cable

  • FALCON EX combines a microwave activation sensor with an explosion-proof/flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX: 13’×16’ at 16’
  • Operating temperature: -22 to 140F
    • .......more details
MGR20-B-2U-M-P/FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Monitored Sold Per Foot

  • €¢Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty •Monitored edge - pls specify the operator edge is connecting to •Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)
E/BLOP/121

Automatic Systems Option 1 Kit 2 LED Lights on Arm

  • Increases visibility of the arm on BL229 gate operator
NO_HAR-11

EMX Detector Only No Wiring Harness Included

041-0180-000

LiftMaster Wiring Harness Camera/LED Pod Dual Lens

  • This replacement kit is compatible with the follwoing models: 84501 84602 85702 85702 87504 87802 B4603T B4603TC B6713T B6713TCH B6753T B6753TCH
DAK-2ULT-MVP

EMX Drive Thru Alert Kit Chime/Strobe Pre-Wired Enclosure *** Price by Quote Only

  • Kit includes: 2x EMX ULT-MVP Vehicle Detectors with LD-11 Connectors
  • 2x EMX PR-46-100 Induction Loops
  • 1x SLM500B LED Beacon and Sounder with SLMBW-012-024GY Wall Mount Bracke
  • 1x 120VAC to 24 VDC Power Supply
  • 1x NEMA 1 Junction Box (wall mounting hardware not provided)
Spec Sheet - DAK-2ULT-MVPQuick Start Guide -DAK-2ULT-MVPULT-MVP ManualDetect On Stop
GDI-LG930

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

  • Low Headroom at 4-3/4" (Trolley)
  • Dimensions: 11.35" x 4.3" x 4.3"
  • Motor type: Brushless DC
  • Max cyles: Open/Cose per day = 3200
  • One operator can handle all AC voltages - Single phase and three phase
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
    • .......more details
OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
  • Includes PHOTO-070
    • .......more details
MILLER-LEAD-WIRE

Miller Edge Up-Charge for Custom Length Lead Wire Sold by the Foot

  • Up charge for extra lead wire
IRB-RET-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X With Hood New UL325-2018 ** To Extent of Inventory

  • Kit includes photoeye with hood reflector with hood and mounting bracket
  • Retroreflective configuration
  • UL325-2018 compliant
  • Six (6) monitoring interfaces
  • 60 ft. operating range
  • Easy installation and set-up
    • .......more details
P-9931T

Pulsar 1-btn Transmitter 318 MHz

  • Allstar compatible
  • Single channel transmitter
  • 8 dipswitches 318 MHz
Programming instructions
ZAP-8070

Zap Auto Lock 8070

  • 8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation
3100P

LiftMaster Std Duty Roller Cage Bearing Hinge Flat Mount Prime Coated Sold in Pairs

  • Serrated Adjustable Yoke Design Provides Fast/Easy Adjustability up to .5 in.
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Easy to Fully Lubricate
  • Maximum Gate Weight: Up to 1000 lbs. per pair. Sold in pairs
    • .......more details
ME120-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
MD-00142

Sprocket 410B17 3/8" Bore NO KW 2SS

51115

Doorlec Fire Release System

  • For fire rated rolling service doors connecting to existing dropout fusible link device
  • For GH and Belt Drive operators
LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

  • The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
  • Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
  • The LRS is equipped with our new DETECT-ON-STOPâ„¢ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
  • Backwards compatible with CS303 sensors
DEV-RSSD-4000-INS

Devanco Rolling Steel Service Door 4000 20GA Insulated Galvanized Slats **Made to Order

  • Model 4000 Insulated roll up door is complete with a curtain hood guides counterbalance and option for operation such as chain hoist electric operator.
  • The insulation shall consist of closed cell urethane foam injected insulation a minimum of 1 inch thick providing a 7.2 R-value and sound barrier protection with an STC 25 rating.
  • Insulation is pressure foamed in place bonding both the front and back slats while filling all voids and creating a thermal break.
  • Pricing varies according to size and options selected.
7500-FS-GALV

Fire Shutter Hot-Dipped Galv Interlocking Slats Made-to-Order

  • Shutters can be up to 13'- 6 inches wide and 12 feet tall with UL labels Class A B or C while still being able to function as normal counter rolling shutters.
  • Oversized fire shutters can be manufactured up to 20 feet wide
  • Model 7500 fire shutters can be installed with either a manual lift external motors a hand crank with or without automatic testing tubular models with the option of automatic testing
  • Along with UL labels that will automatically close the fire shutters for either 3 1½ or ¾ hours the fire shutters can also be manufactured with smoke protection
  • Available finishes: Hot-dipped galvanized steel with an optional baked-on gray polyester enamel coating or 304 stainless steel with a number 4 finish flat profile
  • The viscous speed governor can be set to automatically close the fire shutters at speeds of 6 inches per second up to 24 inches per second complying with NFPA 80 specifications.
    • .......more details
SBB-2-V3

2" Safety Bottom Bracket European 231721 Sold as a Pair Torque Force

  • Includes 1-Right hand and 1-Left hand
  • Zinc plated Steel
  • Max Door Weight: 1000 LBS
  • Cable attachment: Adjustable
  • Protective cover: Yes
  • Use with: Straight track 2"
    • .......more details
GH-311-1

Doorlec Industrial Gearhead Door Operator 1 HP 115V 1-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details