Devanco Canada - Get The Right Garage Door Opener‎ and Parts

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart

BCSI-PM28

Pivin Drapeau Disconnect Coupler BCSI Gate Operator ** Price by Quote Only

K10-34758-2

LiftMaster Battery Tray CSL24U

For use with CSL24U
Also known as: K75-34986-2

41A7946

LiftMaster Wiring Harness

For use with various LiftMaster® Chain / Belt Drive Garage Door Openers.

D525-54-HL-125

Cable Drum High Lift 54" 1-1/4" Bore Torque Force Pair

Maximum hi-lift: 54"
Capacity: 500 lbs per drum
Max. cable size: 3/16"
Cable length: Floor to shaft center 66" minus amount of Hi-Lift
Cross reference: DNS 54-125 OMI 54HL-125 M134-1375-125

HW-KEY-SQ-316058

Lynx Straight Key 3/16" x 5/8" Long

12-12004

LiftMaster 1" Ball Bearing

For use with various LiftMaster® Heavy Industrial-Duty Commercial Door Operators
Drive shaft bearing used on RBH
Same as K12-12004

ETBH-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener with solenoid brake

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

PIN007

Manaras Slotted Spring Pin 3/16" x 1-1/2"

K75-30737

LiftMaster Disconnect Kit for GH

Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
Compatible with LiftMaster® Model GH Commercial Door Operators.

CP-LX300

Lynx Interface Board for UL325 models

For use on 460V & 575V 3 Phase only

CP-TIMER-CN

Lynx Relay (Dual) Timer Hard Wired

PTM-120V

EMX 7 Day Programmable Timer 120V

The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
With up to 16 ON/OFF events per day and 15 different daily options.
Its DIN rail mount design and wide power supply options (12 24 or 120 Volt) make installation easy.
The battery backup saves stored programs in the case of power loss.
Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.

.......more details

Instruction manual Spec sheet Comparison guide

343.155-CUT

Whiting Tongue & Groove Bottom Panel Plain Primer Only 15-1/2" Cut to Custom Size

Cut to exact size required ** customer must specify
Primer only
Does not come with any hardware no retainer no seal

O22R1004

AirLift Operator Install Kit

O22R1002

AirLift Airline 3/8" Sold per Foot

O01R1108

AirLift Op. Original 8ft Complete w/hardware

PC-3

EMX Infrared Modulated Photoeye Thru Beam

Thru beam configuration
LED alignment indicator simplifies installation
No calibration or sensitivity adjustments needed
Wide sensing angle for increased reliability
30 ft. operating range
Housing: Black PVC * Not water tight

.......more details

89493

Marantec RPM Sensor with Wire Harness

For use on M-line/Q-line/EOS models

87-P-062

LiftMaster Push Ring Fastener 5/8" Int

Same as: 87P062 K87-P-62 87-P-062
Used on LiftMaster brake assembly

TC3-211-C

Lynx Commercial Trolley Op. 1/2HP 120V for 14' High Door Contactor

HYBRID-BLK-20

Residential Side & Top PVC/Aluminum W/S with cap 20' Long (241") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-18

Residential Side & Top PVC/Aluminum W/S with cap 18' Long (217") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-12

Residential Side & Top PVC/Aluminum W/S with cap 12' Long (145") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-16

Residential Side & Top PVC/Aluminum W/S with cap 16' Long (193") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-7

Residential Side & Top PVC/Aluminum W/S with cap 7' Long (85") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

GAREX-PVC-W-9

Residential Side & Top PVC Weather-Strip with cap 9' Long (109") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-7

Residential Side & Top PVC Weather-Strip with cap 7' Long (85") - White

White rigid vinyl retainer with white flexible vinyl seal.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

041D8227

LiftMaster Wiring Harness

For use with various LiftMaster® Chain Drive Garage Door Openers.

K77-10897

LiftMaster Mounting Bracket Disconnect (Chainkeeper) H MH GH SD

Also known as: 10-10893 107011 10-40463 1010893 109027 K77-10704

19-40240D

LiftMaster Drive Chain #40 10' Box Black Oxide

Complete kit includes: Drive Chain 10' (#40) and (2) Master Link Kits
Black Oxide coating provides corrosion resistance
Suitable for use exterior applications

QW210

NTE Flameproof Resistor 1/4 Watt 1 kohm 250 mW Axial Lead Sold Individually

21-35057

LiftMaster Transformer 460V 24VAC 40VA

575V PRIMARY 24V SECONDARY
Same as K21-35057

821LMB-2SENSOR

LiftMaster MyQ Smart Garage Door Add-On Sensor Backwards Compatible

This add-on door sensor works with the myQ Smart Garage Hub to monitor and control a second garage door opener.
This version of the myQ door sensor is only compatible with the new myQ Smart Garage Hub by LiftMaster Model 821LMB
Replaces both 821LM-SENSOR and 821LMB-SENSOR and can be used as a replacement for either one
Also known as: 821LM-SENSOR 041D7924-1

COVER047

Manaras C-Box ABS/PC Green Cover with STICKER079

Fits most Manaras models

MA0137

LiftMaster Shear Pin #7 Mega Arm

41C0589-2

LiftMaster Belt Cap Retainer

Also known as: 041C589-2 41A537 41C589-2
For use with various LiftMaster® and Chamberlain® DC Belt Drive Garage Door Opener Models such as 85503
Complete kit includes: Sprocket sprocket cover and replacement screws

4580-304-BLACK

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Black *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

510.9723.00

Whiting Add-On Option 32" Pull Strap for Doors Under 98"

Upgrade option only - must accompany a door order

SF600S-LEFT

Spring Fitting 6" Pair Stationary + LHW 1" Shaft

Cones for 6" ID Left Hand Wound spring wire
Not universal thread

SF600S-RIGHT

Spring Fitting 6" Pair Stationary + RHW 1" Shaft

Cones for 6" ID Right Hand Wound spring wire
Not universal thread

HDSW24UL

Liftmaster Heavy-Duty Variable Speed Swing Gate Op. 24VDC Heater Not Incl.

Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
Features battery backup that provides up to 45 cycles or 120 days of standby power
Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
myQ® Technology enables you to securely control and monitor your gate operator from anywhere
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.

.......more details

1326-2-BLACK-PLEXI

Elton Commercial Window 2" thick 1326 Black Frame Sealed Plexi Glass

Screw together window kit
Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
Cut-out size: 25-1/16" x 12-9/16"
Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
Different glass options and frame colours are available upon request

10-10930

LiftMaster External Disconnect Bracket

Also known as: 10-7006 G107006 107006 1010930

K16-GT2-7

LiftMaster Timing Belt

3M belt
Durable construction
Resists damage from friction and pollutants
Even stress distribution for heavy-duty operators
For use with LiftMaster CSL24UL CSL24V CSL24VDC
DIMENSIONS: 7.5 in OD x 7.25 in ID

.......more details

K20-1050C-2PSF

LiftMaster Electric Motor 1/2 HP 115/30V 1PH CF

Replacement electric motor for fire door op

SPR41B9X5/8

Sprocket 41B9 x 5/8" Bore 3/16" KW 2S 1/4-20 CR

SHAFT104

Manaras Clutch (Input) Shaft for Opera H

GDI-UL325-EYES

GDI Photo Eyes for Monitored Operators N4

CB-4G

Cell Box Prime 4G LTE Cell Call Box w/Keypad Pedestal Mount

Open gates from your phone.
Built in time clock control.
Remotely program your keypad codes by app.
Automatic 7-day timer controlled by the app.
Activity log (see who opened your gates and when).
Access your property by telephone caller ID (known number) SMS or pin code.

.......more details

Sell sheet Quick Start Guide

PPLK1PH-100

LiftMaster Passport Lite 1-Button Mini Proximity Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 100 pack

.......more details

050DCTBF

LiftMaster Receiver Logic Board Kit DC WiFi Bluetooth Enabled

050DCTB is a Bluetooth Enabled Receiver Logic Board Replacement Kit.
For use with various LiftMaster® and Chamberlain® WiFi® DC Chain Drive and Belt Drive Garage Door Openers; powered by myQ®.
The unit will feature a yellow learn button.
Replaces 050DCTWF
Backwards compatible with 050DCTWF
Board: Tri-band Security+ 2.0l

.......more details

GTO-R550

Nortek Replacement Swing Gate Control Board

CDJH-34-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

3 Button station (NEMA 1)
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

ET1820PPAS-1

Carlo Gavazzi Through Beam Reciever 20M Plug

High power through-beam photoelectric switch.
Range up to 20 m.
Easily adjustable sensitivity with 270° potentiometer.
LED output indication.
Precise detection through narrow beam.
Short M 18 metal housing for heavy duty applications. IP 67.

.......more details

TRACK-2"-RAW-8

Raw Vertical Track 2" 8'-0" Sold per Piece

BK600/PR-USA

End Bearing Plate Flanged 8-GA 6" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing C16-32F
EBF6" offset USA Style
1" ID

.187_2"-RH

Torsion Spring .187 x 2" x 12ft RH ***NLA

Wire size: .187
Inside diameter: 2"
Length: 12 ft

19-41HL-NP

Half (Offset) Link #41 Nickel Plated

For #41 chain

19-40ML-NP

Master Link #40 Nickel Plated

For #40 chain

19-40HL-NP

Half (Offset) Link #40 Nickel Plated

For #40 chain

19-60ML-NP

Master Link #60 Nickel Plated

For #60 chain

MOUNTSHAFT018C

Manaras Limit Shaft Kit MGH Pre-2011 up to 1.5HP

For MGH pre-2011 up to 1.5 HP

LPWKP-BLACK

Linear MegaCode Wireless Keypad 318 MHz Black ** To Extent of Inventory

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

SS-1-1/4-11

Solid Shaft 1-1/4" Keyed 11'-0" Galvanized ** To Extent of Inventory

Actual length is approx. 11'-0"

MOD065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

Chain hoist for manual hand operation of standard lift doors equipped with trolley operators.
The 1" cross-header shaft (12' long) drives the front idler of the drawbar
For use with operators with #41 chain
When applicable it incorporates an electric cut-out and brake release cable
Hand chain for 14' high door is standard
Hoist assembly width is only 8.5"

.......more details

111396.0002

Overhead Brake Kit Model RSX 3/4-1HP 3PH

18211

Limit Switch LS1 G3M Male

For use with Rite-Hite dock levelers

41A5257-3

LiftMaster Hardware Kit *** No Longer Available

Hardware Replacement Kit. For use with various LiftMaster® Residential Garage Door Openers

MA020D

LiftMaster Door Kit Mega Arm Tower

122930

Marantec Synergy LC Light Duty Comm. Trolley Opener 315 MHz Head Only

HomeLink compatible
For installation on sectional doors only
Precision Controlled DC Motor Complete with Automatic Soft Start and Soft Stop Feature
Higher Motor Operating Speed: Provides faster open and close cycles
Timer-To-Close: Provides automatic door closure
Convenient Status Display: To indicate the status of your door operator at any time

.......more details

SPR50B36X114

Sprocket 50B36 1-1/4" shaft 1/4" KW

36 tooth sprocket for #50 chain
Does not have any set screws

COUPLING001

Manaras Coupling Light Duty A3032-1

Used with GEAR004

K20-1150C-2LP-H28

LiftMaster Electric Motor 1-1/2 HP 115/230V 1Ph L5

For use with various LiftMaster® Logic 5.0 Gear-Reduced Door Operators
Also known as: 20-1150C-2LP K20-1150C-2LP K20-1150C-2LP-H24

XBA18

NICE Indicator Lights for L-BAR Arm 26.2ft

The Nice Apollo XBA18 is a 26.2 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the L-Bar barrier gate openers.

WA11

NICE Adjustable Stand for L & M BAR Gate Op

Adjustable stand for the barrier arms of the M-Bar & L-Bar barrier gate operators
Attaches to ground and provides support when arm is down

CP-BR-ASSY-575V

Lynx Brake Kit with 575V Solenoid CDJH

Complete brake kit with solenoid

CP-BR-ASSY-115V

Lynx Brake Kit with 115V Solenoid CDJH

Complete brake kit with solenoid

308301

Linear 2-Channel Multi-Code Key Ring Transmitter 300 MHz

Open/Close remote for 2 doors
Compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 codes for each channel (set by dip switches)
RF frequency: 300 MHz

.......more details

Programming instructions

MOTOR009-WIRED

Manaras Electric Motor1/2HP 120/240V 1PH

Instant reverse intermittent-duty electric motor only for MTBL MJ MJH MTH & MTBH models
1725 rpm built-in reset
Wired either 120V or 240V ECB

K20-1075B-2TP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph L5 TEFC

Electric motor
Also known as: 20-1075B-2TP K20-1075B2T

E402-00-FM

Doorlec Ersce Utility Switch 6A/230V Roller Arm ** Indef. Delivery

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller
Made in Italy

MOD114A

Manaras Synthetic Oil Upgrade Only

This Upgrade Mod. is only available when purchaed with a compatible operator
Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances

MM00082

Micanan Solenoid Support Bracket (MSI0085)

VFOH5011

LiftMaster Variable Speed Front of Hood Op. 1/2 HP 120V with CPS-U

Front of Hood Mount for Rolling Steel Doors and Grilles.
Variable speed up to 12”/sec with smooth start/stop feature.
Floor level controls with intuitive menu driven interface.
Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard

.......more details

CDJH-34-115-CON-R

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand

3 Button station (NEMA 1)
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

33356A

Genie Opto-Luctor Wheel

684-33-106

Universal Bracket 2.25" x 2.5" x 24" w/ Plate 2"x12"

BCH505L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph L5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

ACP00922

Nortek LCD Display Assembly AE5/AE1K ***NLA***

Replacement screen only

22253

Doorlec Flush Mount Key Switch O/C Tamperproof

Flush mount momentary-contact spring return key switch OPEN/CLOSE in TAMPER PROOF EEMAC 1 enclosure with gasketed aluminium cover.
Key removable at centre only.
Can open or close door.
Recommended applications: laboratories schools hospitals food processing plants or any other area where sanitary and high security condition are important.


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login