Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
SETR2681AM2K

Erone 2-Channel Mini Transmitter 868MHz

Wireless System Chart
MG-00127

Micanan Plastic Spacer for Boards (Short Length 0.382)

MK-00704

Micanan Harness 1-Phase Contactor Board

MK-00048

Micanan Overload Reset 3-Phase 1.2 - 1.8 Amps

MK-00045

Micanan Overload Reset 1-Phase 18 Amps

MM-00319

Micanan PRO-GJ L-Bracket Right Angle Front of Coil For Rolling Steel Doors

MK-00235

Micanan Flasher 120V

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
MV-00240

Micanan Key Switch ON/OFF w/Best Core Cylinder Nema 4 Surface Mount

MV-00236

Micanan Key Switch O/C Tamper Proofw/Best Core Cylinder Nema 4 Surface Mount

MK-00785

Micanan 3-btn O/C/S Nema-7/9 Pushbutton Control Station

  • Surface mount
  • Killark
MV-00305

Micanan Wireless Pull Cord

HAML-SHAFT-ADAPTR

GDI Shaft Adaptor 1" w/Sprocket Vertical Mount Application

ME110-C

Miller Edge PVC Mounting Channel Sold by the Foot

  • 7/8" length
ME110-2W-BLK-E

Miller Edge 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Worksheet
ME110-2W-BLK-R

Miller Edge 2-Wire Black Right Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling that allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Worksheet
50740

Doorlec On/Off Switch 575V 3Ph Gate Op

  • 20amp
PRO-J-10021-U-LH

Micanan 1HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
.421-6-L

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.421-334-L

Cut-to-Length Torsion Spring .421 x 3-3/4" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.437-514-R

Cut-to-Length Torsion Spring .437 x 5-1/4" Right Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.406-514-L

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.406-334-L

Cut-to-Length Torsion Spring .406 x 3-3/4" Left Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.363-514-R

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Green/White

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-514-INSTALLED
.306-514-R

Cut-to-Length Torsion Spring .306 x 5-1/4" Right Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
ME117-2W-BLK-U

Miller Edge 2-Wire Black Universal Outlet Sold by the Foot

  • Electromechanical slide in edge for 1" to 2" sectional doors.
  • Touch sensitive signaling allows for immediate stopping or reversing of motion. The ME117 is resistant to water flame and most common greases and oils.
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation manualSell sheet
050DCRJWF

LiftMaster Receiver Logic Board DC. WiFi RJO

  • Fits: 8500W
  • Also known as 050DCRJWFMC 50DCRJWFMC
PRO-J-5023-U-RH

Micanan 1/2HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-LJ-5021-U-LH

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Left Hand

  • On-Board receiver holds up to 20 transmitters
PRO-LJ-5011-U-RH

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Right Hand

  • On-Board receiver holds up to 20 transmitters
PRO-GT-10023-U

Micanan 1HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

MA026

LiftMaster Pad Only Yellow For 12' Arm

  • Pad only - arm not included
PRO-GT-10081-U

Micanan 1HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7583-U

Micanan 3/4HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

K29-FDCL-500CCB

LiftMaster FDCL Receiver Logic Board with Battery Rev 500

  • Replacement kit charging circuit board firmware and battery for FDCL
.375-514-L

Cut-to-Length Torsion Spring .375 x 5 1/4" Left Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
PRO-APT-7581-U

Micanan 3/4HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-10043-U

Micanan 1 HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-5083-U

Micanan 1/2HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
60-7242

Econo Caution Sign English 14" x 10"

1004-2-16'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 16 ft***Actual Length 16'2"***

  • For door thickness 2"
1004-134-16'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 16 ft***Actual Length 16'2"****

  • For door thickness 1-3/4"
MOTOR271

Manaras Electric Motor1/2HP 208/460V 3PH

  • This item is compatible with BRAKE011
LR110LTB3815

Telco Thru Beam Receiver M12

  • Remote receiver Series 110
  • M12 x 1 Housing Size
  • Nickel Plated Brass Housing Material
  • 15 m Cable Cable Connection
  • IP 67 Sealing Class
DJ501L5

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
  • DJ operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology
  • Security+ 2.0®
    • .......more details
CP-IDLER-ASSY-MR

Lynx Front Idler Assembly Chain TC3

MK-00033

Micanan Transformer 575V-24V-40VA

T

Molded Rubber Bumper Black 22" L x 10" W x 12" W 3" Projection Centered Reflector 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long ***No Longer Available

  • Reinforcement bar 2-1/4"
  • 20G
LB1212-18

Laminated Bumper Standard Black 12" L x 18" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1010-36

Laminated Bumper Standard Black 10" x 36" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-18

Laminated Bumper Standard Black 12" x 18" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB820-11

Laminated Bumper Black 8" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LLB420-22SF

Steel Faced Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
    • .......more details
TB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB636-11

Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-24

Laminated Bumper Standard Black 12" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-12

Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB412-18

Laminated Bumper Standard Black 12" x 18" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
.207-3-9-LHW

Mini Storage Spring .207 x 3" x 9" long Left Hand

.207-3-9-RHW

Mini Storage Spring .207 x 3" x 9" long Right Hand

MK-00120

Micanan Heater Probe in Reducer Mod. (120V 20W 3/8" NPT)

44-60-280

Extension Spring 10' Door - 280 lbs Gold ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 280 lb load
HINGE-511-PCG

Powdercoated Hinge #5 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #5 - 0.78 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
K94-36934

LiftMaster Main Wiring Harness L5

Z9211-1

Stationary Cone Tool 1-3/4" & 2"

  • Easily dislodges the cone from the torsion spring
41A4208-2

LiftMaster Chain Spreader Kit

  • Chain Spreader Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® Chain drive garage door opener models.
  • Complete kit includes: Chain spreader replacement screws and washers.
  • Also known as: 41A4208 41A4208-2 062210
90-PGR

LiftMaster Parking Gate Radio Mod. Kit

  • G90PGR includes the limit switch wiring and bracket.
  • Used on PG HBG and BG models.
OTBH-6232-AE06

Manaras Trolley Operator 1/2 HP 208V 3Ph with NM Elect. Circuit Board Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
108135.0002

Overhead Poly Type V- Belt for Old RG 32" *** by quote only

MX-00016

Micanan TEFC Motor Upgrade Modification

  • TEFC motor upgrade for 1-phase belt drive operators
MX00037-120V

Micanan Brake Assembly for PRO-J/H 120V Solenoid included

OSH-6232-ECB-LH

Manaras Opera-SH 1/2 HP 208V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
VWS-34-MED-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Medium Oak

  • Pan head
VWS-34-BRONZE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Bronze

  • Pan head
  • S point
VWS-34-ZINC

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Zinc

  • Pan head
37561S.S

Genie Belt and Bullet Assembly 8ft

  • For use on 8 ft doors
  • Compatible with the following:
  • SilentMax 1200 (Model 4042) 1000 (Model 3042) 750 (Model 3055) 550 (Model 2055)
  • ReliaG 650 (Model 1028) 850 (Model 2028)
  • IntelliG 1000 (Model 3024)
41C5497

LiftMaster Wiring Harness Kit High Voltage

  • For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001
41C5548

LiftMaster Wiring Harness Kit Low Voltage

  • For use with various LiftMaster® and Chamberlain® Garage Door Openers
E/BLOP/127

Automatic Systems Single Channel Loop Detector

  • Works with the BL229 gate op. logic control
CB-1.115

Whiting Stainless Steel Cable 115" L with Black Grommet 5/16" Eye 1 Cable

  • 7x7 stainless cable
  • Sold per cable
PRO-GHCB-30053

Micanan 3 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manualSpecification sheet
50440

Push Button Station 3-Btn with Pilot Light and Key Switch Off/On Nema 4 / 12

  • Surface Mount
  • Dust-proof EEMAC 12 and 4
K77-10978

LiftMaster Hardware Box for Model MH

HBS23LUD-H

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Double End Stile Heavy-Duty Sold per Pair

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Low-Headroom Track
  • For 2" or 3" Doors
  • Fits 2" or 3" Track
  • Double End Stile
    • .......more details
.306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
K1D8284-1CC

LiftMaster Main Drive Board 1 Ph (SL585U SL595U)

37350R

Genie Network Adapter GN-BX

  • To be used in conjunction with Closed Confirm remote.
  • For use on IntelliG® and TriloG™ Pro Series models when using any Genie-Net Accessory.
Programming instructions
BOLT016

Manaras Hex Bolt 1/4-20 x 4

109007.3901.S

Overhead Receiver 390 Mhz

  • 9 switch trinary fixed code 3-wire gate and garage door receiver
47DCT

LiftMaster Receiver Logic Board Sec+2.0 Non-MyQ

  • 047DCT is a replacement Security+ 2.0® receiver logic board.
  • This replacement board does not feature MyQ® technology.
  • This 315MHz receiver logic board is compatible with various LiftMaster® AC chain drive and belt drive garage door openers; made after 2011.
  • The unit will feature a yellow learn button.
  • Same as 47DCCR1 47DCCC1 47DCCL1 047DCT41D8060 1D8060
PRO-HBH10053U-R

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
2807.148.140

Whiting .148 x 2-3/16 x 14" Curbside with Cones

MD-00137

Micanan Roller Chain Waterproof #41 10' Pack

36773R

Genie Carriage Assembly for 7' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
029C98205

W-Style Complete Replacement Door White Stainless Steel Pkg 029C98205

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • 98" w x 105" h
  • Price varies according to size
60-8000-7

In-Tube Motor 110V for Screen Door

  • Replacement motor only
  • This is mainly a special pricing product DBS says that we have to contact them for any future pricing.