Devanco Canada - Get The Right Garage Door Opener‎ and Parts

K74-16420

LiftMaster Limit Switch Kit for LGO **DISCONTINUED

Installation Manual

AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

1104-16FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 16' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-12FT-GREY

Residential Side & Top PVC Weather-Strip with cap 12' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-9FT-GREY

Residential Side & Top PVC Weather-Strip with cap 9' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
Polarized photo-eye design for a safe retro-reflective photo-eye system
Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
Range up to 30 ft - indoor use only
24VAC operation
Color: Yellow

.......more details

Installation Manual

RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

Replacement reflector for the CPS-RPEN4 photo-eyes

71-REDGRN-HCT

LiftMaster Red/Green Warning Light Box **DISCONTINUED

Signals if door is moving or stationary
Compatible with model HCT

Installation Manual

8FT-BELT-LDO

Linear 8ft Belt Drive Rail for LD050/LS050/LDCO (HBT8C)

8ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

2704.177_270

Whiting Roadside Torsion Spring 2-3/16" ID 27" Long

Torsion spring wire only
.177 wire size

SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

Wireless RF Digicode® keypad.
Frequency: 433.92 MHz.
For automatic door opening in sequential mode.
6 channels to control 6 different relays or 6 different RF receivers.

Programming Instructions Wireless System Chart

49564

Stanley Chain Drive Traveler

Compatible with all Stanley chain drive units from 1982-present
Not compatible with C-Channel models
Same as part no. 3701965 3703375 3702540
If trolley slider no. 24851 is also required order part number 49563

Installation Instructions Instructions d'installation

K20-1075B-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1PH L3 L4 *** NLA Replaced by H24

Standard 3/4HP 115V Logic 3 or L4 model T J HJ SD & H

41C2735

LiftMaster Chain and Cable Assembly CMC84

Fits a Sears Craftman CMC84 operator

510.1000.00

Whiting Premium Topcoat Paint Option White

Option for Dry Freight Doors

EL25G

LiftMaster Telephone Entry System Gray

Capable of accepting up to 2000 codes
4 assignable and programmable built-in relays
Mounting versatility and available in 3 colors: Gray Nickel or Silver

Installation Manual Sell Sheet

PED72

Pedestal Post 72" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with a 6 in. center radius giving a tight professional look

65853

Marantec Programming Wire - Old ML to New M3

Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.

DF086.1

Whiting Dry Freight Door 3/4" with Track Balancer Standard Hardware and Side Seals

Includes side seal upgrade

MU22-2WIRE-RH-Y

Miller Edge MU22 2-Wire Right Hand Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

10-30702

LiftMaster Chain Guard Top Cover Mfg Painted (K10-30702-2)

1005-1-1/2-8'

Aluminum Bottom Retainer U-Shaped 8' Long

For door thickness 1-1/2"

990LM

LiftMaster Surge Protector ** NLA

Installation Manual Manuel d'Installation

EL25KEY

LiftMaster Replacement Key for EL25 (041B0012)

One (1) key for the EL25
Same as 041B0012

MK00736

Micanan Smart 10.0 Full Feature Circuit Board Non-Monitored ** use MK00641-NM

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has 5 relays

Instructions Manual

305-153613

LiftMaster Idler Sprocket Assembly (K305-153613)

Fits SL595

K-73BG770-3311

LiftMaster Service Kit E-Box for BG770

MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming Instructions

42-31247

LiftMaster Terminal Block 20A 600V

3-position

CB18A0500

Cable 1/8" 7x7 500' Galvanized

Galvanized cable 1/8" 7x7 500ft spool.

Comparison charts

2X6SC50

Devanco Loop 2' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

Actual length is approx. 9'-1"

K20-1075C-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph

G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

Heater used in BG type gate operators

Installation Manual

3AG3

Miniature Fast Acting Glass Fuse 3 Amp 250V (5/pkg) - 766124

6 x 30mm miniature fast acting glass fuse
Rated voltage: 250V
Rated current:3A
ROHS compliant

1005-1-3/4-14

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

WKP250LM3

LiftMaster Wireless Keypad 250-Code ** Replaced by KPW250

Wireless access control keypad
250 code capacity - 4-digit codes
Wireless control of up to 4 doors or gates with additional GCUs
Post or surface mount standard
900MHz
Compatible with GCU and LiftMaster® 315MHz rolling code receivers

.......more details

Programming Instructions

K75-18618

LiftMaster Disconnect Kit for Grey SL595

Kit includes: Disconnect support bracket Detent plate Disconnect lever Release yoke Bevel and Disconnect shaft
Works with SL590 and SL595 Gate operators that are painted Grey

Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

Same as part number K75-50097

T-833-C-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025-311 MHz****NLA

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

1013-1-1/4-14'

Rigid Vinyl Bottom Retainer L-Shaped 14' Long

For door thickness: 1-1/4"

DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

Activates one Delta-3 receiver for remote stop or reverse safety edge
No cables or coiled wires
Mounting screws (4) supplied
Power: 9-volt battery
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

The MGT is the industry’s only fully supervised gate safety edge transmitter.
It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
Features Include:
Signals access controller for stop or reverse when safety edge activates
No cables or coiled wires

.......more details

Programming Instructions

K75-18364

LiftMaster Arm Assembly Kit for SW470

Complete arm kit for SW470 gate operator

12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

Actual length: 179" (14' 11")

STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

Rapid learn feature programs multiple transmitters in just seconds
Ideal for gated communities parking lotsand garages.
Works on a tri-band frequency

Programming Instructions Sell sheet

RS1029

Roller 2" Steel 9" stem- WL 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 9.5" Overall Length: 10.5"
Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)

RESET003

Manaras Resettable Overload Fuse 6A 1 Phase

EXTANT

LiftMaster Coax Antenna Connection Kit JF

For use on Medium-Duty commercial operators only

Installation manual Manuel d'installation

50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

82-PX10-28

LiftMaster Screw 10-32x28

TUBE_SHAFT_9FT

Hollow Shaft 1" x 9'-10" Galvanized 16 gauge

34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

Deluxe Wall Console for Genie Intellicode Series II only
3 function console: operates door opener controls lights and security lock out switch
Compatible with Code Dodger
Same as previous part number: GPWC-2WLB

.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.262-2-R

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

Two-position keyswitch. Key removable in either position.
Surface Mount
May be used on all operators
Die-cast metal enclosure non-tamperproof

.283-134-R

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.243-134-R

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-134-R

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-134-L

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011

86LMC

LiftMaster Antenna Extension Kit

For use with 312HMC 412HMC 422LMC and 423LMC
Kit contains 15ft of cable

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

120/208/240/480V PRIMARY 24V SECONDARY

CB14B0500

Cable 1/4" 7x19 500' Galvanized

Galvanized Cable 1/4" 7x19 500ft spool.
Cable break strength: 2000 lbs

Comparison charts

2807.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Curbside

Replacement torsion spring with cones for Whiting Door Serial # 138631
Specs: .139 x 2-3/16" x 14" Long
Curbside
For Roadside order part #2806.139*140

8FT-RAIL-CHAIN

LiftMaster 8' chain drive rail 1708LMC - colour code: Blue

#48 chain size
Price reflects cost if purchased with an opener

CPS

LiftMaster Commercial Protector System Eyes

Universal commercial photo-eye kit for indoor use
Interface box allows CPS to work with all operators
24 volt AC/DC supply voltage
Mounting hardware included
Sensing distance of 30 feet
Receiving Eye - A: 001D6857-1 Sending Eye - A: 001D6857-2

.......more details

Installation Manual

45ACT

LiftMaster Circuit Board

Board: Tri-band Security+ 2.0
AC Belt and Chain Drive models
Fits models LC500EVC HD420EVC PD622EVC
Same as 41D7675 1D7675 7675 45ACBL1 45ACBL2 45ACBL3 45ACBL4 45ACBL5 45ACCL1 45ACCL2 45ACCL3 45ACCL4 45ACCL5 45ACBR1 45ACBR2 45ACBR3 45ACBR4 45ACBR5 45ACCR1 45ACCR2 45ACCR3 45ACCR4 45ACCR5 045ACT 041D7675

41DJ002

LiftMaster Circuit Board with Plate for 8500

Board: Security+ 2.0 for DC Jackshaft Model 8500
5 year warranty

7001-12-W/B

Commercial Side & Top Weather-Strip 12' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME123-BLK-LH

Miller Edge Black Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
Light run-time is 4 1/2 minutes with adjustable light timer option

.......more details

TUBE_SHAFT_17-STL

Hollow Shaft 1" x 17'-0" Steel 13 gauge

When ordering order one foot longer than actual door width.

.331_6"-LH

Torsion Spring .331 x 6" x 12ft LH Red/White

Wire size: .331
Inside diameter: 6"
Length: 12 ft

.295_6"-LH

Torsion Spring .295 x 6" x 12ft LH Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft

.421_5-1/4"-LH

Torsion Spring .421 x 5-1/4" x 12ft LH Gold

Wire size: .421
Inside diameter: 5-1/4"
Length: 12 ft

.363_5-1/4"-LH

Torsion Spring .363 x 5-1/4" x 12ft LH Green/White

Wire size: .363
Inside diameter: 5-1/4"
Length: 12 ft

.312_5-1/4"-LH

Torsion Spring .312 x 5-1/4" x 12ft LH Yellow

Wire size: .312
Inside diameter: 5-1/4"
Length: 12 ft

.295_5-1/4"-LH

Torsion Spring .295 x 5-1/4" x 12ft LH Blue

Wire size: .295
Inside diameter: 5-1/4"
Length: 12 ft

.283_5-1/4"-LH

Torsion Spring .283 x 5-1/4" x 12ft LH White

Wire size: .283
Inside diameter: 5-1/4"
Length: 12 ft

.306_3-3/4"-LH

Torsion Spring .306 x 3-3/4" x 12ft LH Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft

.312_3-3/4"-LH

Torsion Spring .312 x 3-3/4" x 12ft LH Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft

.319_2-5/8"-LH

Torsion Spring .319 x 2-5/8" x 12ft LH Blue/Green

Wire size: .319
Inside diameter: 2-5/8"
Length: 12 ft

.225_2-5/8"-LH

Torsion Spring .225 x 2-5/8" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2-5/8"
Length: 12 ft

.283_2"-LH

Torsion Spring .283 x 2" x 12ft LH White

Wire size: .283
Inside diameter: 2"
Length: 12 ft

.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

.225_1-3/4"-LH

Torsion Spring .225 x 1-3/4" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 1-3/4"
Length: 12 ft

.218_1-3/4"-LH

Torsion Spring .218 x 1-3/4" x 12ft LH Yellow/Orange

Wire size: .218
Inside diameter: 1-3/4"
Length: 12 ft

635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters