Devanco Canada - Get The Right Garage Door Opener‎ and Parts

355LMC

LiftMaster Universal Radio Control Receiver 315 MHz **NLA

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up to 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the purple learn button (ERT format)
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

Programming Instructions Instructions de programmation

ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

.343_5-1/4"-LH

Torsion Spring .343 x 5-1/4" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

.437_3-3/4"-LH

Torsion Spring .437 x 3-3/4" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 3-3/4"
Length: 12 ft

.306_3-3/4"-LH

Torsion Spring .306 x 3-3/4" x 12ft LH Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft

.262_2-5/8"-LH

Torsion Spring .262 x 2-5/8" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 2-5/8"
Length: 12 ft

.306_2"-LH

Torsion Spring .306 x 2" x 12ft LH Red

Wire size: .306
Inside diameter: 2"
Length: 12 ft

.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

635LMC

LiftMaster Universal Plug-in Receiver 390 MHz ** To Extent of Inventory

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad or 1 dip-switch transmitter and 12 billion code transmitters

Programming instructions Instructions de programmation

813LM

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0 ** To extent of inventory

Encrypted DIP style three-button remote control with Security+2.0 technology
Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
Easy to code 12-position DIP switch offers up to 4096 codes
May also be programmed for Open/Close/Stop functionality
Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
Compatible only with Security+ 2.0™ commercial receivers and operators

.......more details

Programming Instructions Instructions de programmation Sell Sheet

K001A6424-2

LiftMaster Circuit Board Assembly Kit 2008 315 MHz *** No longer available

Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (non- UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

CAM011

Manaras Limit Cam

Limit cam for Mountshaft018A 018B
2 cam's required per shaft

CAM004

Manaras Limit Cam

Limit cam for Mountshaft009A 018C 018D
2 cam's required per shaft

41A5266-1

LiftMaster Brackets for Snappy Sensors (41A5266-3) *** Discontinued

For units from 1993- present equipped with safety sensors
Same as 41A5266-3
For use with with 41A5281
New Gen (2021+) snappy beam sensors 041-0136 are compatible with these brackets and the new 041-0155 brackets
The new brackets (041-0155) are not backwards compatible

.393_6"-RH

Torsion Spring .393 x 6" x 12ft RH Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft

.375_6"-RH

Torsion Spring .375 x 6" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft

.406_5-1/4"-RH

Torsion Spring .406 x 5-1/4" x 12ft RH Blue/Yellow

Wire size: .406
Inside diameter: 5-1/4"
Length: 12 ft

.375_5-1/4"-RH

Torsion Spring .375 x 5-1/4" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 5-1/4"
Length: 12 ft

.312_5-1/4"-RH

Torsion Spring .312 x 5-1/4" x 12ft RH Yellow

Wire size: .312
Inside diameter: 5-1/4"
Length: 12 ft

.295_3-3/4"-RH

Torsion Spring .295 x 3-3/4" x 12ft RH Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft

.283_3-3/4"-RH

Torsion Spring .283 x 3-3/4" x 12ft RH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft

.312_2-5/8"-RH

Torsion Spring .312 x 2-5/8" x 12ft RH Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft

.243_2-5/8"-RH

Torsion Spring .243 x 2-5/8" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft

.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 1-3/4"
Length: 12 ft

25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

Steel construction Black E-coat finish
Consist of roller clamp wear plate stud plate and 5/16" lock nuts
Stainless steel studs and nuts
Cross ref: 5600

12562

Doorlec Lower Brake Shoe - Left

Fits on all Doorlec operators equipped with brake shoes
Use with drum #12561

CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

Brake shoes for all Lynx operators
Assembly includes the shoes
release spring and bolt included

PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) ** No Longer Available

Proline / Lynx 455 Plus trolley slide assembly
For operators built from 2000 +

H14G01

Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#1 position
Use between sections 1 and 2 or in the center position
Same as part number 241

.......more details

I500

Erone 1100lbs Exterior Maglock Surface Mount Stainless *** To extent of Inventory Repl. by ESM500

1100 lbs holding force ( VS15R)
12/24Vdc – Current Draw: 550mA @ 12Vdc – 280mA @ 24Vdc
220mm (H) x 64mm (W) x 40mm(D) (8.6in x 2.5in x 1.5in)
Exterior applications & High-traffic areas
Includes monitoring capability
Stainless steel

.......more details

Installation manual Manuel d'installation Sell sheet Drawing

SEL2641R433-C2P

Erone 2-Relay Stand Alone Power Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (230Vac)
Self-learning memorization
Relays with Pulse step or delayed operating mode.
Power requirements: 12/24Vac/dc
Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)

.......more details

Installation Manual Wireless System Chart

OPH-6532-ECB

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

Installation Manual Sell Sheet

OPH-6533-ECB

Manaras Opera-H 3/4HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

Reversing contactor with 24V coil
Same as part # LC2K12107B7
Demensions: 3.5" long x 2.25" wide x 2.25" high
Use 03-8024K as possible replacement

LIMIT021

Manaras Single Limit Switch with Flat Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

Limit Switch Chart

TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

This timer-to-close can be added to any Commercial garage door opener.
Use with RELAY022 (8-pin base) if required.
Schneider Elect. part no. RE88867215

Adding a timer

DOORARM001

Manaras Door Lifting Arm Assembly

Complete door arm assembly for all Manaras trolley operators.

RADIO-KIT005

Manaras plug-in receiver for Board 60 or electromechanical operators 390 MHz *** To extent of inventory

Direct ECB plug-in receiver card kit (RADIO RE100B) for on-site installation.
Maximum 16 transmitters per receiver.

RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

Open/Close/Stop remote for 4 doors.
By selecting A B C or D on the rotary switch you can operate any of the four doors.
Comes with LED battery life indicator.
9V battery included.
Can be wall or post mounted.
Must be used with 4 MCR series receivers.

.......more details

Programming Instructions

CABLE-15

Manaras 15ft coax cable extension with BNC connectors

Used on Radio-15 to extend antenna

RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included

Programming Instructions

2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

Fits Coldsaver Roll-Up Doors
1-1/8" thick max 96" wide
Includes Lock and keeper

2235.096

Whiting Coldsaver Bottom Panel 14-1/2" x 96" with seal and retainer

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
This is an excellent quality aftermarket product

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

1336.6

Whiting Stainless Steel Roadside Top Closure Bracket for 10" radius

15.1

Whiting Truck Door Stainless Steel Center Hinge

1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

RV-100

1" Vinyl Insert for Brush Retainer per foot

Color: Black
Fits in light brush retainers

300BH

3" Heavy Brush Insert 8ft Long

Polypropylene bristles
Same as model MS1712

4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

200ft spool of vinyl insert.

1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

For use with 1016

Safety data sheet

1019-1-3/8-10'

Rigid Vinyl Bottom Retainer Flat 10' Long

Black - for door thickness of 1-3/8"

1019-1-3/8-8'

Rigid Vinyl Bottom Retainer Flat 8' Long

Black - for door thickness of 1-3/8"

1006-2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/8-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

7001-16-BROWN

Commercial Side & Top Weather-Strip 16' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-9-BROWN

Commercial Side & Top Weather-Strip 9' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-18FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 18' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond
Full case quantity only (12).

1104-9FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 9' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

7001-16-WHITE

Commercial Side & Top Weather-Strip 16' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1001-10-GREY

Commercial Side & Top Weather-Strip 10' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

1001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-240

Extension Spring 8' Door - 240 lbs Blue ** Replaced by 27-48-240

Double - Loop
32" long 48" stretch 240 lb load
Springs sold individually

Spec Sheet

32-48-140

Extension Spring 8' Door - 140 lbs Blue ** Replaced by 27-48-140

Double - Loop
32" long 48" stretch 140 lb load
Springs sold individually

Spec Sheet

25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

Double - Loop
25" long 42" stretch 270 lb load
Sold individually

Spec Sheet

25-42-240

Extension Spring 7' Door - 240 lbs Blue w/ clip

Double - Loop end for strength
25" long 42" stretch 240 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-170

Extension Spring 7' Door - 170 lbs Orange

Double - Loop
25" long 42" stretch 170 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

Double - Loop
25" long 42" stretch 90 lb load
Sold individually
Same as part number 109
Rated for 10000 cycles

Spec Sheet

27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 98" Spring Length: 60" Wire Size: .243
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire
Heavy-duty cast aluminum cable drums hold up to 130" of cable

.......more details

27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

26-94523

Truck Door Intermediate Panel (13" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-94322

Truck Door Bottom Panel with Seal (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

26-40018

Truck Door Bottom L-Retainer 84" Long for Todco Roll-Up Doors

Galvanized steel construction for extra strength and corrosion resistance.
Fits both standard and heavy-duty bottom seals.
Pre-punched holes for added convenience
Cross Reference: T #61191 W #4034 260000

26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)

25E10220

Truck Door Top Closure Plate & Slide Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Included: Base plate slide bolt & flanged nut
Improved heavy-duty reinforced slide
Adjusts top panel for firm seal
Cross Reference: W #6944

DM28VL

Cable Drum Vertical Lift 28' 1350-28 1" Bore Pair

28' Vertical Lift aluminum die cast alloy. •3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".
Mounting: 1" (or 1-1/4" must specify when ordering) solid shaft with 1/4" keyway.

.......more details

SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

H11G09

Hinge #9 x 11 gauge

11 gauge # 9 hinge - 0.90 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

Z9002

Pusher Spring - 15" Sold as a Pair

Pusher spring 15" long with 6" travel. Sold as a pair

EP2979

Exhaust Port 3" with latch long barrel

For use on insulated door panels up to 2" thick.
Inside diameter: 3" Includes fasteners & gaskets.
Polished aluminum finish.

CBC18

Thimble 1/8" - 100 per pkg

R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/8"
Riveted with Ball Bearing

R5201

Cast Iron Pulley 3"

Bored for 3/8" diameter bolt
Cable diameter: 1/8"
Cast iron pulley mounted on two pressed sealed bearings.
Radial Load: 400lb

S-HOOK_LARGE

S Hook 1/4" x 2" Large

25-10311

Truck Door Heavy-Duty Lift Handle Zinc

Heavy-duty wide grip design
Zinc plated finish
Cross Reference: T #61401 W #1715 250000

25-10300

Truck Door Cable Anchor Bracket Zinc

Steel construction Zinc plated finish
Allows proper rotation of cable head
Cross Reference: T #61204 W #4004 240000

D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
Works with most LiftMaster gate operators
Won't work with Elite Series Mega Arm Slide & Swing
Simply plug it into the harness already in the operator
Loop lead-in wires connect to operator terminal strip
Gold plated control contacts

.......more details

Installation Manual Sell Sheet

CUSTOM4X6PO

Devanco Loop 4'x6' rigid-pvc pave-over

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X12PO50

Devanco Loop 6' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep