Devanco Canada - Get The Right Garage Door Opener‎ and Parts

26-94525

Truck Door Intermediate Panel (15" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

BL-09

Barlock Kit Complete for 9ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (55-1/2")

Assembly Manual

4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

ALUM-562

Aluminum 24" x 100' Spool Commercial Brown # 562

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 562
Reverse side is #431 Bright White

Colour chart

MT21-YELLOW-RH

Miller Edge 2-Wire Pressure Sensitive Edge Yellow Right Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual

12-000I-KEY

Spare Key for American Access Keypad

Spare key only for model 12-000I

H12G01-SS

Hinge #1 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

BG770-50-11

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 115V 1 Ph *Discontinued Replaced by MATDCBB3*

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
2-btn control station Open/Close
Fully adjustable limit system
Pad mount
Security+ 2.0 technology

.......more details

PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

Reflector (ER4) not included

Installation Manual

E402-00-FM

Doorlec Ersce Utility Switch 6A/230V Roller Arm ** Indef. Delivery

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller
Made in Italy

CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

Same as Garaga CF101

SLT17-20P

Rolling Steel 2" Flat Slat 20-ga Primed

MH00015

Pillow Block Bearing 1" UCFL 205-16

GALV-243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound Galvanized White/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

CBB532

Stop & Sleeve 5/32" 100 pair

Includes 100 stops (9150000628) and 100 oval sleeves (9150000622)

18T

Skylink 2-Button Keychain Remote Rolling Code

Compact-size dual button transmitter can operate two garage doors with 18R Garage Door Receiver
Alkaline battery included. FCC/IC approved.

MK-00098

Micanan Boot for Cut-Out Switch

PRO-TB-10021-U

Micanan 1 HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

BEA-10-FALCON

BEA Falcon Motion Detector Mount over 11'5"

Motion sensor with microwave activationsolution for industrial indoor and outdoor use.
Ideal for automatic industrial doors vehicle gates and detection and loading docks.
Sensor also has the ability to differentiate between pedstrians and vehicles
Can be set vertically from 0 to 180 degrees
Mounting height between 11.5' and 23'
12/24V AC/DC

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

41C4672

LiftMaster RPM Sensor Kit Screw Drive *** No Longer Available

For use with various LiftMaster® and Chamberlain® Screw Drive Garage Door Openers
Same as 041C4672

PRO-T-5043-U

Micanan 1/2HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

.295-5-1/4-RH-C

Torsion Spring .295 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 5-1/4" Length: 12 ft

S-HOOK_LARGE

S Hook 1/4" x 2" Large

.319-514-R

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

CP-SH-58-1038-HDC

Lynx Complete Limit Shaft Assembly for HDC

5/8" x 10-3/8"
Same kit used for MCJH except the HCT has 1 extra nut

144C56

LiftMaster Idler - Cable Pulley for chain drive

For square rail assemblies
Same as 144C0056

1104-9FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 9' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

25-42-240

Extension Spring 7' Door - 240 lbs Blue w/ clip

Double - Loop end for strength
25" long 42" stretch 240 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

MP-00037

Micanan Hand Crank for Gearhead Jackshafts PRO-GH PRO-GHC

Provides for hand crank operation in lieu of hand chain and pocket wheel

BEARING012

Manaras Flange Bearing Green for 1' bore ** Repl. by BEARING047

15/32" bolt holes

VBELT_5L345

Doorlec VBelt 5L 34.5" *** Replaced by VBELT_5L350

Same as part number #19052

50-450

LiftMaster Interlock Switch for Sectional Door Nema 4 (Same as 50-13529)

Interlock switch is engaged by the door side lock and disables operator control.

SL332COP

Copper Sleeve 3/32" 100 Sleeves per Pkg ** Price on request

Oval sleeves ONLY
Stops sold separately part # ST332COP

Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

KTAG

Erone Proximity Key Tag with Key Ring

Works with the Promi500 & DGProx
Square in shape color is black

Wireless System Chart

H14GHALF

Half Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 1-5/8" wide with slotted holes

TUBE_SHAFT_18FT

Hollow Shaft 1" x 18'-10" Galvanized 14 gauge

50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

Nema 4
3-wire air switch; 1-NO and 1-NC contact
Mosley
NO contact on Yellow and Green

22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

Steel construction Zinc plated
Cross ref: Eberhard 4300

PRO-LH-5011U-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

1104-9FT-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1001-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black dual-fin vinyl

RA-LPL-KEYPAD

Lynx Wireless Proline Keyless Entry 303 MHz

Illuminated keypad
Weather shutter protects keypad from elements
1 to 6 digit codes for maximum security
Allows for access without remote or keys
Compatible with Lynx residential openers built from 2000+
Mounting screws and 9V battery included

.......more details

Compatibility chart

LB610-36

Laminated Bumper Standard Black 10" x 36" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-36

Laminated Bumper Standard Black 12" x 36" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

8087.225.310

Whiting .225 x 2-5/8 IN x 31" Curbside with Cones

An original Whiting assembly

LIMIT023

Manaras Single Limit Switch with 46 degree Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

Continuous-duty base mount
This item is compatible with BRAKE011

41B3869-3A

LiftMaster Trolley Kit for Belt Drive

Complete trolley assembly
Replaces 41B3869-1

WB-400-24V

Audible Warning Device Exterior Surface Mount 24V

6" bell 85 DBA

LB612-18

Laminated Bumper Standard Black 12" x 18" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

22 gauge
Max size: 18'4" max std. width 20'4" max std. height
Slate type: Curved
Finishes: Gray White Tan Brown or Galvanized
RAL Powder coat option in 188 colors

2236.096

Whiting Coldsaver Intermediate Panel 12-1/2" x 96"

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

.295-134-R

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

K001C8103-1

LiftMaster L5 Antenna

28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

CP-SH-34-1712-EXP

Lynx Clutch Shaft Assembly for Explosion-Proof HDC Operators

Modified for explosion-proof operators
3/4" x 22 x 3-1/2" thread

89LMC

LiftMaster Vibration Isolator Kit *** No Longer Available

Isolates vibration between operator head and mounting surface
Kit contains 2 isolators
Can be used with any garage door opener brand

Installation Manual Manuel d'installation

17K

Rolling Steel 2" Flat Continuous Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

4004-10FT

Aluminum Retainer only for Heavy Brush 10' Long 45 degree ** To extent of inventory

For angle application (45 degree)
For use with Heavy Brush

GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

Includes CPS-U photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

OGH-6534-ECB

Manaras 1 HP 600V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

S142BRNN924

Carlo Gavazzi Amplifier 24V

Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
11-pin circular plug for easy connection.
8A SPDT relay output NPN/ PNP transistor output or alarm output.
Diagnostics for sensor test during operation.
Alignment help via LED or alternation of alarm output.
Level indication for dirt accumulation.

.......more details

OSH-6213-ECB-LH

Manaras Opera-SH 3/4 HP 240V 1Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

WD-309884

Wayne Dalton 3-Btn Transmitter 303 MHz 3910

Visor Style (comes with visor clip)
Green Indicator Light
Size: 2-1/4"" x 3-1/2"
Works with Wayne-Dalton Models: Classic Drive: 3012 3016 3512; Quantum: 3211 3212 3213 3313 3412 3413
Same as models: 3910 02-3047-3BUH 297132

Programming Instructions

Q074

LiftMaster Coupling (3/4 x 5/8) 3 pcs K75-50130

Fits model HCT
Same as K75-50130

OSH-6233-ECB-LH

Manaras Opera-SH 3/4 HP 208V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

03-35711

LiftMaster Contactor Relay 24V

Contactor Relay Replacement Kit (24V 2NO+2NC)

7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

I-Beam Chain Drive Rail for model 3595

029-98290

W-Style Replacement Door White Stainless Steel Package 029-98290

Replacement door size between 96-1/4" - 98" wide x 72-90" high
Painted white
Stainless steel package

50-106

Take-Up Reel 2-Wire Metal 18-ga 20ft

18-gauge
20 ft extended
Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
Also called Reel cord

7001-12-BROWN

Commercial Side & Top Weather-Strip 12' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

PRO-GT-10083-U

Micanan 1HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

39142R

Genie Aladdin Connect

Aladdin Connect™ controls and monitors your garage door opener with your smartphone
Compatible with smartphone iPad(R) & tablet devices
Easy installation & setup
Operates up to 3 doors with 1 system
Able to program timed closed functions
Wi-Fi communication Retro-fit capable Works with all brands

.......more details

Quick set-up guide Guide d'installation rapide

.235-3.25-11.5-RHW

Mini Storage Spring .235 x 3.25" x 11.5" long Right Hand

SSZP10-6

Solid Shaft 1" Keyed Zinc Plated 10'-6"

32-48-150

Extension Spring 8' Door - 150 lbs Red ** Replaced by 27-48-150

Double - Loop
32" long 48" stretch 150 lb load
Springs sold individually

Spec Sheet

K23-30716

LiftMaster Stop Switch 120VAC 6A

Same as 20-30716

2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide
Includes Lock and keeper

22-575

Brake Solenoid 575V

Same as Solenoid004
Fits on all 575V garage door or gate operator brake system.

MM-00360

Micanan Circuit Board Support U-Bracket

5001-18-DK-BROWN

Residential Side & Top Weather-Strip 18' Long Commercial Brown

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

SHAFT002

Manaras Hand Crank Shaft 5/8" Sold per Foot Max. Length 12ft

Must specify exact length required when ordering

PRO-APTB-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-H-5053U-LH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

39914650

Hitch Pin Forged Wire Handle 7/8" x 6-1/2" Red

Usable length is measured between the shoulder and the cotter pin

OTBH-6113-1-ECB

Manaras Trolley Operator 3/4HP 120V 1Ph with Electronic Circuit Board

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain