Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MD-00252

Micanan Connecting Link #50

SHAFT036

Manaras Limit Shaft 5/8"-18x12

LIMIT017

Manaras Micro Limit Switch SPDT

CAP001 sold separately

CAP001

Manaras Push Button Sealing Boot for LIMIT017

MG020-B-2E-03

Miller Edge Sensing Edge Black 2-Wire End Outlet 3 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

SPRING009

Manaras Clutch Spring 5/8"

MK-00034

Micanan Overload Reset 1-Phase 5 Amps

PRO-GH-7553U-RH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

.393-334-R-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.393-514-R-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.393-334-L-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

620-100990

Linear Heater Kit Assembly 230V Cage Style

Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)

SG-13-NO

Telco Light Curtain with Rectifier Normally Open 72" (13-193-028-D1-E-H58-5) ***No Longer Available

Normally Open
SGR13-193-028-D1-E-HS8-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NO relay output 15m cable

Specification sheet Wiring diagram

.375-514-R-C

Cut-to-Length Torsion Spring .375 x 5 1/4" Right Hand Wound. Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.343-6-L-C

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.295-258-L-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.273-134-R-C

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-2-L-C

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-134-L-C

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.218-134-R-C

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

ME116-BLK-RH

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide-in edge for sectional doors.
With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
ME116 is resistant to flame water and most common greases and oils
Soft ends
Temperature range -30F to 155F
Lead wire: 22 gauge universal

.......more details

PRO-HHD-5081U-L

Micanan 1/2HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1/2 HP208V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN) Specification Sheet

MG-00127

Micanan Plastic Spacer for Boards (Short Length 0.382)

MK-00696

Micanan 4-Pole Terminal Strip

MK-00041

Micanan Overload Reset 1-Phase 12 Amps

MK-00142

Micanan Transformer 115V-24V-50VA

MV-00027

Micanan 110V Commercial Receiver CR32-110V

A transformer 110/24V (MK00030) is supplied separately for the 110V version

MV-00006

Micanan 3-btn O/C/S w/Key Lock-Out Nema-1 Pushbutton Control Station

Flush mount

ME110-2W-BLK-E

Miller Edge 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet

PRO-J-10081-U-LH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

12119

Doorlec Commercial Aluminum Sliding Carriage with Teflon Insert

Works on all Doorlec trolley operators

.437-334-L

Cut-to-Length Torsion Spring .437 x 3-3/4" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.406-514-R

Cut-to-Length Torsion Spring .406 x 5-1/4" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.243-334-R

Cut-to-Length Torsion Spring .243 x 3-3/4" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

PRO-GT-15023-U

Micanan 1-1/2HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-15083-U

Micanan 1-1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

ALUM-507

Aluminum 24" x 100' Spool Tan / Tan # 507

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 507
Reverse side is #431 Bright White

Colour chart

PRO-APTB-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Made from Cast Ductile Iron for Impressive Strength
Painted Blue for good Visibility
Completely Reversible for Simple Use
Size: 8" wide x 12" long x 9" high

CBI-087

Wheel Chock CBI-087 Cast Ductile Iron

Cast Ductile Iron for Impressive Strength
Painted Yellow for High Visibility
Size: 8-1/4" wide x7-1/4" long x 8-1/2" high

LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1010-14

Laminated Bumper Standard Black 10" x 14" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB920-11

Laminated Bumper Black 9" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-36

Laminated Bumper Standard Black 12" x 36" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB820-11

Laminated Bumper Black 8" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-18

Laminated Bumper Standard Black 12" x 18" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB612-18SF

Steel Faced Laminated Bumper Black 12" x 18" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-12

Laminated Bumper Standard Black 10" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

MK-00787

Micanan Heater Probe 120V 20W Brass Fitting Field Install

T007

Manaras Trolley Track 7ft for 1/2HP models *Actual length 114"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

9-10-2

Lynx Hand Hoist Chain Zinc Plated 26ft / Bag

Zinc plated silver chain

02-404

LiftMaster Key Switch Assembly On/Off Nema 4/12 **DISCONTINUED

Two Position Key Control Station
Outdoor Surface Mt. (NEMA 4/12)
Non-Tamperproof
OPEN/CLOSE spring return to center (OFF) key removable in center position only.
Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
Die cast metal enclosure

.......more details

MF00011

Micanan HH.H. Bolt 3/8" - 16 UNC x 3/4" Long

Used on PRO-GHC
10 required per operator

T-50-H

FL-Heddolf 1-btn Transmitter ID220-1KA-311 MHz ** Discontinued

Keystone-Heddolf single button FL T-50 compatible remote
9 dip switch format
9V battery and metal clip included

7-21-1A

Lynx Barlock Latch

Comes with screws

Assembly Manual

MP-00032

Micanan Center Mount Modification W/ No Chain Hoist PRO-J

Provides for center mount installation of a jackshaft operator
Operator output shaft is coupled in line with door shaft assembly
Couplings NOT supplied
NOTE: Reverse limit modification required

PL-B09-CRG-METAL

Lynx Inner Trolley (Metal)

Proline / Lynx 455 Plus trolley slide assembly
For operators built from 2000 +

OGH-6533-CONT

Manaras 3/4 HP 600V 3Ph Gear Head Operator Contactor Model

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

HBSLUD

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Double End Stile Sold per Pair ** NLA

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For Low-Headroom Track
For 2" or 3" Doors
Fits 2" or 3" Track
Double End Stile

.......more details

.306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Red

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

MM00020

Micanan Disconnect Arm

PRO-H-7553U-RH

Micanan 3/4HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

MP-00040

Micanan High Cycle Modification Jackshaft Models PRO-J / H only

For installations with high frequency usage
Double V-belt cast iron flanged precision bearings on all shafts and delay on reverse circuit
Supplied with #50 chain

91-00700

Truck Door Elevator Bolt 1/4"- 20 x 1-3/4" 1" head

Zinc plated finish

PRO-HBH10053U-L

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

PRO-HBH-5011U-R

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

36773R

Genie Carriage Assembly for 7' Door

Works on Genie IntelliG 1000 & 1200 Garage Door Openers
Includes: carriage emergency release rope and straight arm.
Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.

CF-101-24

Commercial Side & Top Weather-Strip 24' Long Aluminum / Vinyl

Same as Garaga CF101

785149

FAAC XP15B Photocells 15m Range 785103

Surface mounted security devices with 15 m range.
The kit contains: 1 transmitter and 1 receiver.
The photocell has a BUS system technology "2easy" for easy installation.

CLUTCHPLATE006

Manaras Torque Limiter Plate

BG770-50-53

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 575V 3 Ph *Discontinued Replaced by MATDCBB3*

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
2-btn control station Open/Close
Fully adjustable limit system
Pad mount
Security+ 2.0 technology

.......more details

AW14K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord

AW14 12ft. of RAH-500 P-50H 218-27-18 P50
Kit Includes: AW14 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

RW-PANEL

Richards Wilcox Replacement Door Panel Special Order

As per customer's requirements

MU22-4WIRE-E-Y

Miller Edge MU22 4-Wire End Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MS00005

Micanan Trolley Track 12-ga 14'-6" L Per Set ( Includes 2 Angles Only)

Track only- no chain or hardware

FD165C

Electric Motor Only 1.5 HP 110V 1Ph 56C Flange

MK-00063

Micanan Honeywell Limit Switch

.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

Q088

LiftMaster Arm Assembly HCT K75-50146

Same as K75-50146

PRO-4X_MOD

Micanan Nema 4X Modification 1/2HP- 2HP 3-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 2HP Motors

1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

For door thickness 2"

R4257

Linear Power Supply

For SW100 and SL100 gate operators

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

CP-CONT-SCHNEIR

Contactor Schneider 24V

Works on Lynx MCJH
Same as LC2 K12107B7 & MK00108
replace Riken Contactor

VBELT_4L290

VBelt 1/2" x 29" (4L290)

V-Belt not cogged

.243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

STRUT-2-1/4-16'-NH

Door Strut 2-1/4" Non Hemmed 16ft Long

Reinforcement bar 2-1/4"

ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 431

Colour chart

MIRM-T2-50

Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued

Attaches directly to a Sectional door.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.

.......more details

AOMRON

Omron Heavy-Duty Retro-Reflective Photo Eye 110VAC/24V 40ft Range

24-240 VAC/DC
35mA/125mA at 24VAC
20mA/60mA at 110VAC
UL listed to UL325 standards
NEMA 3 4 12 Outdoor Rating
40 ft. sensing distance

.......more details

PBTL-3-102

Key ONLY for PBTL-3 Z102 Sold per Key

Cut Key # Z102
Price for 1 key

5001-7-BLACK

Residential Side & Top Weather-Strip 7' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

1104-14'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Light Bronze (F) **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

5001-WG-8-MOAK

Residential Side & Top Weather-Strip 8' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

GL-12-LED

Guide Lights for Loading Docks Amber LED 12-24VAC/DC 13.5" long Sold as a Pair *Discontinued*

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
12 LEDs per guide light

.......more details

28-03090

Truck Door 1" Vert. Track and Right Angle Assbly Curbside (RH) 96.5" Todco Style**To extent of inventory

For Todco style doors
Galvanized steel 14-gauge construction
Includes right angle frame 1" track and operator bracket
Fits doors 72" - 90" high

201-300-411-00

Equinoxe Long Range Transmitter O/C/S for 16-Doors 433 MHz Pre-2016

Open/Close/Stop remote for 16 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Old generation - prior to 2016

Programming Instructions Instructions de programmation

27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528